Amflo 512-50E Red 300 PSI Rubber Air Hose 1/4" x 50' with 1/4" MNPT End Fittings

Amflo 512-50E Red 300 PSI Rubber Air Hose

The Amflo 512-50E red rubber air hose has a 1/4" ID and is 50 ft. long. Its rubber construction provides resistance to abrasion and allows the hose to remain flexible at temperatures ranging from -20 to +165 degrees F. Its polyester yarn reinforcement provides the strength necessary to reach and maintain its maximum pressure rating of 300 pounds per square inch (psi), and it comes equipped with two 1/4" factory-installed brass male National Pipe Thread Taper (NPT) fittings. This hose is suitable for a wide range of commercial and industrial pneumatic applications.Industrial hoses transfer or convey air or liquid in hose systems. When selecting industrial hoses, use the STAMPED method: S = Size (ID, OD, and length) T = Temperature (maximum and minimum temperatures of material being transported) A = Application (industry or process) M = Material (to be conveyed, type and concentration) P = Pressure (maximum working pressure) E = Ends (type of end connectors or couplings on hose) D = Delivery method (volume and velocity)The inside diameter of the hose must be adequate to keep pressure loss to a minimum and avoid damage to the hose due to heat generation or excessive turbulence. The hose must be capable of withstanding the minimum and maximum temperatures that occur within the hose s...

  • Color: Red
  • Brand: Plews / Edelmann
  • ASIN: B000CFNKK0
  • UPC: 087817512506

Plews & Edelmann Amflo 14-50K Blue 300 PSI Polyurethane Air Hose x 50' with 1/4" MNPT Ends and Bonus Kit

Plews & Edelmann Amflo 14-50K Blue 300 PSI

This new kit is All about value. Not only will your customers get a high quality product in the hose, but it comes ready to use with a 10 piece air accessory kit. From improvements to innovations, Plews Inc. Is dedicated to bringing our customers, markets and industry new products that will spark ingenuity in everything you do. From automotive to hardware to industrial products, we'll be there, leading the way.

  • Brand: Plews & Edelmann
  • ASIN: B06XTDR5HC
  • UPC: 087817145001

Amflo 576-50A Orange 300 PSI PVC Air Hose 3/8" x 50' With 1/4" MNPT End Fittings by Amflo

Amflo 576-50A Orange 300 PSI PVC Air Hose

Features a lightweight flexible kink-resistant design;Hose is ideal for general purpose applications;300 PSI orange PVC air hose;Hose diameter is 3/8 inch and hose length is 50 feet;1/4 inch MNPT end fittings;Lighter than Rubber;Oil and Abrasion Resistant;Made in the USA;Ideal for all types of work sites;Fluorescent Orange Color

  • Brand: Amflo
  • ASIN: B0184XNMRW
  • UPC: 784497173958

Mintcraft TA-054 Air Hose End, 1/4 in, MNPT, 3/8 in ID

Mintcraft TA-054 Air Hose End, 1/4 in, MNPT,

  • Brand: OKSLO
  • ASIN: B07H2JJ778

Amflo 576-100A Orange 300 PSI PVC Air Hose 3/8" x 100' With 1/4" MNPT End Fittings

Amflo 576-100A Orange 300 PSI PVC Air Hose

The Amflo 552-50AK red rubber air hose has a 3/8" inside diameter, is 50 ft. long, and comes with nine-piece blow gun kit. Its rubber construction provides resistance to abrasion and flexibility at temperatures ranging from -20 to +165 degrees F. It has a maximum pressure rating of 300 pounds per square inch (psi), and comes equipped with two 1/4" factory-installed, brass male National Pipe Thread Taper (NPT) fittings. The blow gun kit consists of a chrome-plated compact blow gun, a safety tip, two tapered rubber tips, a needle tip and a tapered brass tip, as well as an industrial interchange connector for the blow gun and an industrial interchange coupling and connector set for the air hose. Typical applications include manufacturing, auto repair, and other commercial and industrial applications where pneumatic tools are used and blow-off needs exist. Industrial hoses transfer or convey air or liquid in hose systems. When selecting industrial hoses, use the STAMPED method: S = Size (ID, OD, and length) T = Temperature (maximum and minimum temperatures of material being transported) A = Application (industry or process) M = Material (to be conveyed, type and concentration) P = Pressure (maximum working pressure) E = Ends (type of end connectors or couplings on hose) D = Delivery...

  • Brand: Amflo
  • ASIN: B00L47TDPQ

Amflo 552-25AE Red 300 PSI Rubber Air Hose 3/8" x 25' with 1/4" MNPT End Fittings

Amflo 552-25AE Red 300 PSI Rubber Air Hose

The Amflo 552-25AE red rubber air hose has a 3/8" ID and is 25 ft. long. Its rubber construction provides resistance to abrasion and allows the hose to remain flexible at temperatures ranging from -20 to +165 degrees F. Its polyester yarn reinforcement provides the strength necessary to reach and maintain its maximum pressure rating of 300 pounds per square inch (psi), and it comes equipped with two 1/4" factory-installed brass male National Pipe Thread Taper (NPT) fittings. This hose is suitable for a wide range of commercial and industrial pneumatic applications.Industrial hoses transfer or convey air or liquid in hose systems. When selecting industrial hoses, use the STAMPED method: S = Size (ID, OD, and length) T = Temperature (maximum and minimum temperatures of material being transported) A = Application (industry or process) M = Material (to be conveyed, type and concentration) P = Pressure (maximum working pressure) E = Ends (type of end connectors or couplings on hose) D = Delivery method (volume and velocity)The inside diameter of the hose must be adequate to keep pressure loss to a minimum and avoid damage to the hose due to heat generation or excessive turbulence. The hose must be capable of withstanding the minimum and maximum temperatures that occur within the hose ...

  • Color: Red
  • Brand: Plews / Edelmann
  • ASIN: B00807XY9Y
  • UPC: 087817552250

Amflo 14-50 Blue 300 PSI Polyurethane Air Hose 1/4" x 50' with 1/4" MNPT Swivel and Field Repairable Ends

Amflo 14-50 Blue 300 PSI Polyurethane Air Hose

The Amflo 14-50 blue polyurethane air hose has a 1/4" ID and is 50 ft. long. Its blue tube and cover are made of polyurethane, which has non-marring characteristics and provides resistance to weathering, abrasion, oil, and kinks. This hose provides both durability and flexibility at temperatures ranging from -30 to +150 degrees F. It is reinforced with a nylon braid for the strength necessary to reach and maintain its maximum pressure rating of 300 pounds per square inch (psi), and comes equipped with two 1/4" factory-installed, field-repairable, brass male National Pipe Thread Taper (NPT) swivel fittings with PVC (polyvinyl chloride) bend restrictors that reduce twisting and bending, increasing the life of the hose. This hose is manufactured as a lighter-weight alternative to bulkier rubber and plastic hoses for use in contracting and industrial applications.Industrial hoses transfer or convey air or liquid in hose systems. When selecting industrial hoses, use the STAMPED method: S = Size (ID, OD, and length) T = Temperature (maximum and minimum temperatures of material being transported) A = Application (industry or process) M = Material (to be conveyed, type and concentration) P = Pressure (maximum working pressure) E = Ends (type of end connectors or couplings on hose) D = De...

  • Color: Blue
  • Brand: Plews / Edelmann
  • ASIN: B00807XRKU
  • UPC: 087817140501

Brass LP Adapter Fitting Female to Female POL x 1/4" MNPT

Brass LP Adapter Fitting Female to Female POL

This LP Adapter is used between a small portable LP tank and connects to a 1/4" Female Fitting- Either a regulator or a hose. Solid Brass.

  • Brand: EZ Travel Collection
  • ASIN: B00OM63ZZ0
  • UPC: 603185613456

Amflo 576-100A Orange 300 PSI PVC Air Hose 3/8 x 100' With 1/4 MNPT End Fittings by Amflo

Amflo 576-100A Orange 300 PSI PVC Air Hose

General-purpose air hose for a wide range of commercial and industrial applications;Orange PVC tube and cover for resistance to abrasion, weathering, moisture, alkalis and weak acids;Braided nylon reinforcement for strength;Temperature range of -20 to +145 degrees F;Two 1/4 factory-installed, brass male NPT rigid fittings

  • Brand: Amflo
  • ASIN: B01M039ZT9

ABN Air Compressor Hose - 100ft Long 3/8 Air Hose All Weather-Proof Lightweight Hybrid 1/4in MNPT Ends, 300 PSI

ABN Air Compressor Hose - 100ft Long 3/8

Air compressors are vital for a lot of our day-to-day projects in the shop, which is why you need a reliable air hose. Some air hoses leak, crack, and are super heavy and cumbersome to lug around. Some even work against you because they are so stiff and inflexible. You need a durable air hose that you can rely on, which is why we offer the ABN Air Compressor Hose 100' Feet Long Weather-Proof Lightweight Hybrid 3/8 Air Hose. It will remain flexible and perform flawlessly up to 300 PSI. The entire hose is so lightweight that you will barely have to lift a finger, and at 100 feet (30.5m) long, it is the perfect length for any project you are working on. The 1/4-inch MNPT ends and 3/8-inch fittings are durable, and the hose is easy to wind and roll because of its extreme flexibility. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Brand: ABN
  • ASIN: B01M15ELK1
  • UPC: 688295862215

Weberdisplays 6' Ft Long Braided Airbrush Hose with 1/8 inch to 1/8 inch BSP fittings and One 1/8" to 1/4" end Coupling Coupler Fitting For Air Brush

Weberdisplays 6' Ft Long Braided Airbrush Hose with

  • Brand: Weber
  • ASIN: B01BMV3I54
  • UPC: 714833324461

Flexzilla Ball Swivel Whip Air Hose, 3/8 in. x 6 ft. (1/4 in. MNPT Ball Swivel x 1/4 in. FNPT Ends), Heavy Duty, Lightweight, Hybrid, ZillaGreen - HFZ3806YW2B

Flexzilla Ball Swivel Whip Air Hose, 3/8 in.

Flexzilla Air Hoses offer superior flexibility for tight radius bends in both cold and warm environments. Engineered polymer-blend material permits use in environments where generalpurpose PVC and rubber hoses may become too stiff. Features of ZillaWhip hoses increase longevity of the main hose, reduces user fatigue by eliminating weight of a couple/plug, improves air tool ergonomics and the ball swivel increases mobility in tight spaces.

  • Color: Ball Swivel End
  • Brand: Flexzilla
  • ASIN: B003V5G4BA
  • UPC: 923296300138

Moeller Universal Inline Glass View Fuel Filter (3/8", 5/16", 1/4" Barb in Kit)

Moeller Universal Inline Glass View Fuel Filter (3/8",

MOELLER MANUFACTURING CO 033319-10 UNIV INLINE GLASSVIEW FUEL FILT ER WITH BARB IN KIT

  • Brand: Moeller Marine
  • ASIN: B000MT94OM
  • UPC: 039729319100

Legacy HFZ3825YW2 Flexzilla 3/8 x 25' Lightweight Heavy Duty Hybrid Air Hose (1/4 MNPT ends) by Legacy Manufacturing

Legacy HFZ3825YW2 Flexzilla 3/8 x 25' Lightweight Heavy

Lays flat; no memory;Kink resistant under pressure;Extreme all-weather flexibility, even in sub-zero temperatures (-40 degress to 150 degrees F);Maximum working pressure: 300 pounds per square inch;Excellent abrasion-resistant outer cover; includes bend restrictor that reduces wear and tear, prolonging the life of the hose

  • Brand: Legacy Manufacturing
  • ASIN: B01MZ101FY

Milton 605 1/4" 1/4" MNPT 1/4" ID Hose End Fitting - Box of 10MNPT 3/8" ID Hose End Fitting - Box of 10

Milton 605 1/4" 1/4" MNPT 1/4" ID Hose

1/4" FNPT solid brass hose end fittings are used to assemble new hoses or replace old fittings on hoses. For best results and professional finished product the hose end should be secured with a crimped ferrule. This set of two hose ends fit a 1/4" hose ID.

  • Brand: Milton Industries
  • ASIN: B003V5PZ60
  • UPC: 030937301253

Kegco LH-54S-2 Pro Series Two Product Secondary Regulator, Chrome

Kegco LH-54S-2 Pro Series Two Product Secondary Regulator,

The Kegco LH-54S-2 Pro Series Two Product Secondary Regulator is built with high end features. Secondary regulators are used when you are attempting to dispense two or more kegs off of the same Co2 tank at different pressures. A secondary regulator will allow you to lower the pressure to each keg individually. You still need a primary regulator that then connects to the secondary with a piece of air line. Each secondary regulator has its own shut off valve and pressure adjustment knob, allowing you to set two different pressures on two different kegs and release the pressure from any one of the kegs. Secondary regulators are best mounted to a wall or the inside of the refrigerator.

  • Color: Chrome
  • Brand: Kegco
  • ASIN: B00MFZ1DT0
  • UPC: 793842261035

Amflo 554-100A Blue 300 PSI Premium PVC Air Hose 3/8" x 100' With 1/4" MNPT End Fittings And Bend Restrictors

Amflo 554-100A Blue 300 PSI Premium PVC Air

The Amflo 554-100A blue premium PVC air hose has a 3/8" ID and is 100 ft. long. Its tube and cover are made of blue PVC (polyvinyl chloride) for resistance to abrasion, weathering, moisture, alkalis and weak acids. Its braided nylon reinforcement provides the strength necessary to reach and maintain its maximum pressure rating of 300 pounds per square inch (psi). This hose is capable of functioning effectively at temperatures ranging from -20 to +145 degrees F. It comes equipped with two 1/4" factory-installed brass male National Pipe Thread Taper (NPT) rigid fittings, with PVC (polyvinyl chloride) bend restrictors that increase the life of the hose. This hose is suitable for a wide range of commercial and industrial air-conveyance applications.Industrial hoses transfer or convey air or liquid in hose systems. When selecting industrial hoses, use the STAMPED method: S = Size (ID, OD, and length) T = Temperature (maximum and minimum temperatures of material being transported) A = Application (industry or process) M = Material (to be conveyed, type and concentration) P = Pressure (maximum working pressure) E = Ends (type of end connectors or couplings on hose) D = Delivery method (volume and velocity)The inside diameter of the hose must be adequate to keep pressure loss to a minimu...

  • Color: Blue
  • Brand: Plews / Edelmann
  • ASIN: B000UBNFMY
  • UPC: 087817334269

Legacy HFZ3835YW2 Flexzilla 3/8 x 35' Lightweight Heavy Duty Hybrid Air Hose (1/4 MNPT ends) by Legacy Manufacturing

Legacy HFZ3835YW2 Flexzilla 3/8 x 35' Lightweight Heavy

If it's not ZillaGreen, it's not Flexzilla;Extreme all-weather flexibility, even in sub-zero temperatures! (-40? to 150? F);Kink resistant under pressure;Superior bend radius;Lays flat, no memory

  • Brand: Legacy Manufacturing
  • ASIN: B01MXZGD2Q

Amflo 13-50AE Blue 300 PSI Polyurethane Air Hose 3/8" x 50' With 1/4" MNPT Swivel Ends And Bend Restrictor Fittings

Amflo 13-50AE Blue 300 PSI Polyurethane Air Hose

The Amflo 14-100 blue polyurethane air hose has a 1/4" ID and is 100 ft. long. Its blue tube and cover are made of polyurethane, which has non-marring characteristics and provides resistance to weathering, abrasion, oil, and kinks. This hose provides both durability and flexibility at temperatures ranging from -30 to +150 degrees F. It is reinforced with a nylon braid for the strength necessary to reach and maintain its maximum pressure rating of 300 pounds per square inch (psi), and comes equipped with two 1/4" factory-installed, field-repairable, brass male National Pipe Thread Taper (NPT) swivel fittings with PVC (polyvinyl chloride) bend restrictors that reduce twisting and bending, increasing the life of the hose. This hose is manufactured as a lighter-weight alternative to bulkier rubber and plastic hoses for use in contracting and industrial applications. Industrial hoses transfer or convey air or liquid in hose systems. When selecting industrial hoses, use the STAMPED method: S = Size (ID, OD, and length) T = Temperature (maximum and minimum temperatures of material being transported) A = Application (industry or process) M = Material (to be conveyed, type and concentration) P = Pressure (maximum working pressure) E = Ends (type of end connectors or couplings on hose) D ...

  • Brand: Amflo
  • ASIN: B00L47SPD2

Orbit 10106H Misting Nozzle

Orbit 10106H Misting

The Brass and Stainless Steel Misting Nozzle is the most efficient and water-conservative mist nozzle available today. It only uses 1/2 gallon per hour per nozzle and features a sturdy brass body with stainless steel orifice. The nozzle requires simple maintenance: just soak periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage. Includes: 5 Misting Nozzles

  • Color: NA
  • Brand: Orbit
  • ASIN: B000A16TE0
  • UPC: 718455101066
Similar 0.25 Mnpt Ends Results
0.25 Mnpt Ends Video Results
           

Raven .25 Auto Pistol

0.25 Mnpt Ends

Shooting the Raven .25 auto pistol.

Tags: Raven,.25,Auto,Pistol,shooting,range,gun

Converting Between Moles and Liters of a Gas at STP

0.25 Mnpt Ends

At STP (Standard Temperature and Pressure:0º C and 1 atm), 1 mole of gas takes up 22.4 L of volume. We'll learn how to convert back and forth between moles and liters of a gas at STP. Avogadro's Law is sometimes used as the name for the fact that 1 mole = 22.4 L at STP. We will look at how to do ...

Tags: Standard Conditions For Temperature And Pressur...

How to Use Quick Connect Fittings

0.25 Mnpt Ends

http://www.waterfilters.net/Quick-Connect-Fittings_c_1006.html Quick Connect fittings are an easy way to connect water filters and other systems to your water line. This how-to video compares modern quick connect fittings and old school compression fittings. Quick connect fittings are so convenie...

Tags: quick connect fittings,compression fittings,joh...