Geekpure Filter Housing 10" for Reverse Osmosis System -1/4 Inch Inlet/Outlet-for 2.5 Inch x 10 Inch Fitlers (RO5-FH10)

Geekpure Filter Housing 10" for Reverse Osmosis System

Operation Specification: FEED WATER PRESSURE :35 - 100 PSI TEMPERATE: 40 - 110°F/5-45°C PH :3.0 -11.0 MAX TDS 1000 MG/L TURBIDITY < 1.0 NTU MAX SDI

  • Color: White
  • Brand: Geekpure
  • ASIN: B078W4HRGX
  • UPC: 680577668409

Hydronix HF3-10CLBK34 10" Clear Housing with Black Rib Cap, 3/4" Ports

Hydronix HF3-10CLBK34 10" Clear Housing with Black Rib

Hydronix HF3 series Slim Rib cap Filter housings have pressure Relief (PR) buttons and are ideal for Typical applications such as pre- and post-filtration for ro systems, under sink filters, counter top systems, ice machines, food service and other applications. Hydronix HF2 series housings are available in a variety of colors and are made to house 2.5" diameter cartridges. Most 9 7/8" and 10" cartridges fit easily and caps are available in 1/4", 3/8" and 1/2" female NPT ports.

  • Brand: Hydronix
  • ASIN: B01CFOGE3K

Pentek BFS-201 3/8" #10 Slim Line Two-Housing Filter System

Pentek BFS-201 3/8" #10 Slim Line Two-Housing Filter

This Pentek BFS-201 3/8" #10 Slim Line two-housing filter system is suitable for residential, commercial, and industrial applications with limited space. It consists of two polypropylene housings mounted in series on a white powder-coated carbon steel wall-mounting bracket. Each housing has a reinforced polypropylene cap with two 3/8" female National Pipe Thread Taper (NPT) threaded connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure-relief button on the inlet side relieves housing pressure during cartridge changes. Depending on the filter cartridges (sold separately) used, this system can provide filtration for residential drinking water purification, commercial deionization and coalescing, and industrial processes such as plating, organic reduction, and circulating baths. The system is rated for a maximum flow rate of 40 gallons per minute (gpm), a maximum pressure of 90 pounds per square inch (psi), and a maximum temperature of 100 degrees F (37.8 degrees C). This three-housing filtration system is for use in various applications such as residential water treatment, deionization, and purification of industrial process water, among others.Specifications Filter cartridge size (H x W) (sold separately) 10 x 2-1/2 inches (254 x 63.5 m...

  • Brand: Pentek
  • ASIN: B003VT5TP8
  • UPC: 160921457465

Pentek 158643 3/8" #10 3G Slim Line Clear Filter Housing with Bracket and Pressure Relief

Pentek 158643 3/8" #10 3G Slim Line Clear

This Pentek 158643 3/8" #10 3G Slim Line clear filter housing with integrated mounting bracket and pressure relief is suitable for low flow rate applications that have space restrictions. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/8" female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10" x 2-1/2" sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 2 pounds per square inch (psi) at a flow rate of 5 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.Specifications ...

  • Color: Clear
  • Brand: Pentek
  • ASIN: B003JMRJ6Y
  • UPC: 807032970765

Hydronix HF3-10CLWH34PR 10" Clear Housing with White Rib Cap, 3/4" Ports with Pressure Relief Button

Hydronix HF3-10CLWH34PR 10" Clear Housing with White Rib

Hydronix HF3 Series Slim Rib Cap Filter Housings have pressure relief (PR) buttons and are ideal for typical applications such as pre- and post-filtration for RO systems, under sink filters, counter top systems, ice machines, food service and other applications. Hydronix HF2 Series housings are available in a variety of colors and are made to house 2.5" diameter cartridges. Most 9 7/8" and 10" cartridges fit easily and caps are available in 1/4", 3/8" and 1/2" female NPT ports.

  • Brand: Hydronix
  • ASIN: B01CFOGH32
  • UPC: 736173920240

Pentek 153018 #10 Slim Line Clear Sump

Pentek 153018 #10 Slim Line Clear

This Pentek 153018 #10 Slim Line clear sump fits caps for Pentek #10 Slim Line clear filter housings with any inlet and outlet size, and same size caps made by several other manufacturers. It is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition. This sump is for use with Pentek #10 Slim Line clear housings, which are used in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorga...

  • Color: Clear
  • Brand: Pentek
  • ASIN: B003J0AZT4
  • UPC: 700999876852

Pentek 150237 #10 Big Blue Filter Housing, 1" Female NPT Inlet/Outlet

Pentek 150237 #10 Big Blue Filter Housing, 1"

This Pentek 150237 1” #10 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 1” female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10” x 4-1/2” filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 100 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others.SpecificationsFilter cartridge size (H x W) (sold separately)10 x 4-1/2 inches (254 x 114 mm)Initial pressu...

  • Color: Blue Housing Black Cap
  • Brand: Pentek
  • ASIN: B0045LUE4W
  • UPC: 802251189912

Geekpure 10 Inch Whole House Big Blue Water Filter Housing 1-Inch Inlet/Outlet with Wrench and Bracket -4.5 x 10 Inch - Clear Color (Pack of 1)

Geekpure 10 Inch Whole House Big Blue Water

  • Color: CLEAR TRANSPARENT
  • Brand: Geekpure
  • ASIN: B0779TH4MS

Hydronix HF2-10CLWH14 10" Clear Housing with White Flat Cap, 1/4" Ports

Hydronix HF2-10CLWH14 10" Clear Housing with White Flat

Hydronix HF2 series Slim flat cap Filter housings are ideal for Typical applications as pre- and post-filtration for ro systems, under sink filters, counter top systems, ice machines, food service and other applications. Hydronix HF2 series housings are available in a variety of colors and are made to house 2.5" diameter cartridges. Most 9 7/8" and 10" cartridges fit easily and caps are available in 1/4", 3/8" and 1/2" female NPT ports.

  • Color: Clear
  • Brand: Hydronix
  • ASIN: B01CFOFZ08
  • UPC: 799705707757

Pentek 150071 3/4" #10 Standard Clear Filter Housing with Pressure Relief

Pentek 150071 3/4" #10 Standard Clear Filter Housing

This Pentek 150071 3/4" #10 Standard clear filter housing with pressure relief is suitable for residential, commercial, and industrial applications. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/4" female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10" x 2-1/2" sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.Specifications Filter cartridge size (H x W) (sold sep...

  • Color: Clear
  • Brand: Pentek
  • ASIN: B003VT7ERY
  • UPC: 799932596186

Pentek PENTEK-150072#10 Standard Blue/Clear Filter Housing, 3/4"

Pentek PENTEK-150072#10 Standard Blue/Clear Filter Housing,

The 150072 Pentek 3/4-inch #10 standard blue/clear without pr mounting bracket cap is made of clear styrene-acrylonitrile (San), allowing you to visually ensure your filter is operating at its optimal flow and capacity. This housing does not have a pressure relief button on the cap. The Pentek 150072 may be used in a variety of low-flow applications, such as under sink, counter top and pre- and post-reverse osmosis filtration systems. This housing may also be used in some humidifying systems, recreational vehicle filtration systems and food service applications. Order by 4PM CST for same day shipping.

  • Color: Clear / Blue
  • Brand: Pentek
  • ASIN: B013GV4ATQ
  • UPC: 051678500729

Pentek 158648 10" 3G Slim Line Filter Housing 1/2" Blue Sump IB w/PR

Pentek 158648 10" 3G Slim Line Filter Housing

Pentek Pentek 158648 1/2 inch NPT 3G Slim Line 10 inch Blue Housing

  • Color: Blue
  • Brand: Pentek
  • ASIN: B002WDS366
  • UPC: 051678586488

Pentek 158117 1/4" #10 Slim Line Clear Filter Housing

Pentek 158117 1/4" #10 Slim Line Clear Filter

This Pentek 158117 1/4" #10 Slim Line clear filter housing is suitable for low-flow applications that have space restrictions. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 1/4" female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. The housing can be used with a 10" x 2-1/2" sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 2 pounds per square inch (psi) at a flow rate of 3 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.Specifications Filter cartridge size (H x W) (sold separately) 5 x 2-1/2 inches (127 x 63.5 mm) Initial pressure drop at 3 gpm 2 psi Maximum temperature 125 degrees F (51.7 degrees C) Maximum pressure 125 psi Maximum dimensions (H x W) 12-1/8 x 4-5/8 inches (308 x 118 mm)H is height, the vertical distance from lowest ...

  • Color: Multi
  • Brand: Pentek
  • ASIN: B003VT79VA
  • UPC: 163120782901

Pentek 3/4" Threaded 10" Genuine Big Blue Filter Housing Kit | Complete with Bracket, Screws and Wrench (150469 150061 150296)

Pentek 3/4" Threaded 10" Genuine Big Blue Filter

This complete kit comes to you from Better H2O Products Inc which includes : ✪ Genuine Pentek 3/4"" #10 Big Blue filter housing (Pentek # 150469) with pressure relief valve, ✪ Genuine Pentek stainless steel bracket with stainless steel screws (Pentek # 150061) [which will not rust like white painted ones] ✪ Genuine Wrench (Pentek # 150296) ✪ All guaranteed to fit! Don't assume the parts will fit - order the complete kit! All parts of this kit come neatly packaged in a single box► Initial pressure drop of 2 psi at a flow rate of 15 gpm►Suitable for high-flow and heavy sediment applications►Whole home filtration, food and service, irrigation and more applications►Opaque blue sump is made from reinforced polypropylene for strength and chemical resistance►Black cap is made from high-flow polypropylene (HFPP) for stiffness►3/4" female National Pipe Thread Taper (NPT) threaded input and output connections►Nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal►Pressure relief button on inlet to release pressure for easier filter changes►Can be used with a 10" x 4-1/2" filter cartridge (sold separately)►Maximum operating pressure of 100 psi►Maximum operating temperature of 100 degrees F (37.8 degrees C)►NSF 42 Certified for quality assuran...

  • Color: Blue, Black, Stainless Steel
  • Brand: Pentek Big Blue by Better H2O Products Inc.
  • ASIN: B07L7JTYX1
  • UPC: 628110525499

Hydronix HF2-10CLWH12 10" Clear Body, White Flat Cap 1/2"

Hydronix HF2-10CLWH12 10" Clear Body, White Flat Cap

This Hydronix HF2-10CLWH12 clear filter housing is 10" long, has a white flat cap, and a 1/2" port connection, and houses a water filter cartridge. The housing body is made of styrene acrylonitrile copolymer (SAN), a polypropylene cap, and a buna-n O-ring seal. It has a maximum temperature of 125 degrees F and a maximum pressure rating of 75 pounds per square inch (psi). This filter housing is certified by the National Sanitation Foundation (NSF) Standard 42 for material requirements only, and is suitable for use in water dispensing applications.Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size...

  • Color: White
  • Brand: Hydronix
  • ASIN: B00D04CHRM
  • UPC: 696736707247

Pentek 153017 #10 Slim Line Blue Housing Sump

Pentek 153017 #10 Slim Line Blue Housing

This Pentek 153017 #10 Slim Line blue housing sump fits caps for Pentek #10 Slim Line opaque filter housings with any inlet and outlet size and same size caps made by several other manufacturers. It is made of reinforced polypropylene for strength and resistance to chemicals. This sump meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use with Pentek #10 Slim Line opaque filter housings, which are used in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The p...

  • Color: Blue
  • Brand: Pentek
  • ASIN: B003VTB1IC
  • UPC: 799932589645

Pentek PENTEK-158623 Clear 3G Filter Housing

Pentek PENTEK-158623 Clear 3G Filter

The Pentek 158623 is a clear 3G filter housing features a 1/2 inch Inlet outlet and a pressure relief valve. Designed for standard 10 inch by 2.5 inch filter cartridges, the clear housing makes filter inspection a breeze. The standard size gives the user a wide selection of filters to choose from. Order your Pentek 158623 by 4PM CST for same day shipping.

  • Color: White
  • Brand: Pentek
  • ASIN: B002WDXW3U
  • UPC: 051678586235

Geekpure 10 Inch Whole House Big Blue Water Filter Housing 4.5" x 10"-1-Inch Inlet/Outlet with Wrench and Bracket-Blue Color (1)

Geekpure 10 Inch Whole House Big Blue Water

Specification: Maximum Pressure: 90 psi (6.2 bar) Temperature:40-110°F/5-45°C Shelf life: 5 Years More valuable information: ✪What is dimension of the big blue housing? It is 7"X7"X14" . ✪What is in the box? 1x10inch big blue housing with pressure release , 1pc plastic wrench and bracket . ✪What is filters options? 1.PP spun filter,ASIN:B07797MT8K, Remove sand, dirt, sediment. life time:6 months. 2.Granular activited carbon filter,ASIN:B0779V95SR, Remove chlorine, taste & odors, very fine particulates. life time:6months. 3.Carbon block filter, ASIN:B077971QT7,Further remove chlorine, taste & odors, very fine particulates. life time:6 months. PS.The Life Time of the Filter Cartridge Depends on Usage Amount and Feed Water Quality.  Note: Please lubricate the o-ring with silicon grease and use wrench provided to prevent leakage. 2. Protect filter housing from freezing.  3. This filter housing has a maximum operating pressure rating of 90 psi, if you suspect that your water pressure will at any time exceed 80 psi, a pressure regulator MUST BE INSTALLED before the filter housing. this action will guard against the water pressure exceeding the maximum pressure rating.it is recommended that the pressure regulator be set at 70 psi or less. 4.The rubber o-ring provides...

  • Color: Blue
  • Brand: Geekpure
  • ASIN: B07799BBST
  • UPC: 680577668768

EcoPure EPWO4 Universal Large Capacity Whole Water Filter Housing-NSF Certified-Premium Filtration System-Built to Last

EcoPure EPWO4 Universal Large Capacity Whole Water Filter

The EcoPure EPWO4 high flow whole home water filter system is designed for larger homes with 1 inch plumbing and installs on the incoming water line to filter out sediment, dirt, rust and sand for cleaner, clearer water throughout your home. This water filtration system allows for customized filtration based on filter choice, including carbon options for better tasting water at every faucet. The mounting bracket and pressure release button makes changing filters easy, saving you time and hassle. This system is universal fit meaning it will take most major brands of whole house replacement filters including: EcoPure, Whirlpool, Omni, Culligan, Watts, Filtrete, 3M, GE, and DuPont. Text EcoPure to 444999 to sign up for filter change reminders. Questions? Lifetime tech support available, call the EcoPure helpline at (800) 693-1138 or visit ecopure.com.

  • Brand: EcoPure
  • ASIN: B06VYH4BK4
  • UPC: 819561011581

10" Filter Housing Replacement Kit - 3 Filter Housings w/Fittings For RO Systems, Drinking Water System, and all 10" x 2.5" Filters

10" Filter Housing Replacement Kit - 3 Filter

With the regular stress of removal and tightening, filter housings and fittings will weaken over time. To prevent unwanted system failure, the filter housings on your systems need to be replaced EVERY 5 YEARS. This kit includes three 10" white filter housings, two 1/4" hex nipples, and two 1/4" MPT x 1/4" quick connect elbows. These housings will fit all standard 2.5" x 10" filter cartridges commonly used on point-of-use RO systems, drinking water systems, and prefilters for ice machines and other water appliances and devices.

  • Color: White
  • Brand: Abundant Flow Water
  • ASIN: B00CDX23PM
  • UPC: 783583353502
Similar 10 Filter Housing Results
10 Filter Housing Video Results