(2) 20 Inch 60 lbs Gas Prop Lift Springs Rod Struts Heavy Duty Tool Box Lid Top RV Pair

(2) 20 Inch 60 lbs Gas Prop Lift

(2) 20 inch 60 lbs Gas Charged Lift Supports Pair. Reference numbers: LGP6-200-60, 612293, 612297, 612299, 612313, 612317, 612231. Red Hound Auto high quality gas props and lift supports have been designed to meet or exceed OE specifications. Easy do-it-yourself installation. Note: Replacing a single gas prop is not recommended for doors, hoods, etc. that have more than one prop. Replacing gas props or lift supports in pairs is always a good idea in order to keep the load balanced, maintain even resistance and avoid uneven wear. Undue stress on a single prop over the other results in diminished life for both props.

  • Color: 2 - Gas Props
  • Brand: Red Hound Auto
  • ASIN: B00Y3H1FKU
  • UPC: 847227034117

10MM SHOCK PISTON FITS MODEL: HTCTC02T, HTCTR04, HTCTC04

10MM SHOCK PISTON FITS MODEL: HTCTC02T, HTCTR04,

10MM SHOCK PISTON FITS MODEL: HTCTC02T, HTCTR04, HTCTC04

  • Brand: Team C
  • ASIN: B01C6C965E
  • UPC: 739792857843

Angled Lift Support Bracket Outside Mount - Zinc Plated 10 Gauge Steel - 10mm Ball Stud - Gas Shock Mounting - Lid Strut Prop Spring Mount

Angled Lift Support Bracket Outside Mount - Zinc

Angled Lift Support Bracket for Gas Struts. 10 Gauge Zinc plated Steel.

  • Brand: JQuad
  • ASIN: B074R6GT2W
  • UPC: 859668006295

2 Truck Upfitters 20" Gas Props for ARE Pickup Truck Bed Tonneau Covers (19.7" extended, 11.8" compressed, 100 pounds of pressure each) MEASUREMENT REQUIRED! Incl 4 ball mounts and nuts!

2 Truck Upfitters 20" Gas Props for ARE

Truck Upfitters Premium Gas Struts for A.R.E. Fiberglass tonneau covers. Fits MOST A.R.E. brand models, specifically LT, LSII, and LSX, along with other brands and models. These DO NOT FIT every fiberglass tonneau. Please measure your existing struts before replacing with these. These are 100 lb struts, so they are for heavy weight fiberglass ARE and other similar brand tonneaus that have lift assist style arms. Please check out our other sizes and pressures of gas struts by searching for Truck Upfitters. NOTE: These struts require two people to install, one person to held cover in open position while another removes and replaces the strut. Removing strut while cover is open and unsupported can cause injury or damage

  • Brand: Truck Upfitters
  • ASIN: B074QWFQ8P
  • UPC: 709832096730

Axial AX30091 67-90mm Shock Set 10mm Piston (2-Piece)

Axial AX30091 67-90mm Shock Set 10mm Piston

Axial’s signature high quality aluminum shock sets are now available for the front of yourEXO Terra Buggy. Add these precision machined beauties for some style and a little extra strength to your buggies suspension. With the smoothest action possible, these will surely help you tune the suspension for maximum performance!• Hard anodized aluminum shock body• Threaded for easy pre-load adjustment• Full range of shocks springs available• Direct replacement for stock plastic shocks• Includes all parts needed to build two complete front shocks• Assembly and shock oil required• Laser etched logos• Compatible with other vehicles, but may shorten ride height• Recommended for AX90015 EXO Terra Buggy Kit and for AX90024 EXO Terra Buggy RTREXO rear aluminum shocks: AX30092 72-103mm Shock Set

  • Brand: AXIAL
  • ASIN: B008JXJMHW
  • UPC: 816874010447

Universal Force-120 lbs Gas Spring Shocks/Lift Supports 20" Extended Length,10mm Ball Socket Struts C1608055, Set of 2

Universal Force-120 lbs Gas Spring Shocks/Lift Supports 20"

2Pcs Universal Gas Spring Lift Supports Shocks with Force120 Lbs (534N)/per shock; Extended Length: 19.69 inches, Compressed Length: 12.20 inch; End Fittings: 10mm Nylon Ball Sockets; Best replacement parts in Automotive, Truck, Industrial, Marine, ATV Vehicles, Household cabinets, RV Vehicles and many other DIY applications.

  • Color: Black
  • Brand: Vepagoo
  • ASIN: B078T6SCW8

Suspa C16-08054 C1608054 20" Gas Prop, Quantity (2), Force 100 Lbs Per Prop, Force Per Set 200 Lbs, Camper Rear Window, Tonneau Cover Lift Supports, Window Lift Support, Made in USA

Suspa C16-08054 C1608054 20" Gas Prop, Quantity (2),

We stock thousands of different Lift supports supplied from various quality manufactures that are not listed here. If we don't list it chances are we can build yours depending on the specifications. Please contact us with the details of your requirements and we can research to find the best supports suited for your needs. Special lengths, different pressures or ends, send us the information. Some other names that lift supports are know for are Gas Springs, Struts, Cylinders, and Prop Rods. Have an existing support with part numbers on it send us any and all numbers that you can point you to the correct Amazon Listing. Gas Charged Lift Supports are energy storage devices which create force by compressing gas inside a cylinder. Unless shown as a universal, each Lift support listed in this Amazon item is specifically manufactured to OEM specifications for the listed application. Each support is tested to perform as well as the original units and in many cases to exceed the manufactures specification. Lift Supports loose pressure over time, even sitting on shelves in most auto parts stores and many of the inventory liquidators on the web. Our primary business is that of lift supports, and we make sure to sell newly produced units. If unsure of a listing please send contact us and we ...

  • Brand: SUSPA
  • ASIN: B0041EBSX4

Suspa C16-09322 C1609322 10" Gas Prop, Quantity (2), Force 40 Lbs Per Prop, Force Per Set 80 Lbs, Camper Rear Window, Tonneau Cover Lift Supports, Window Lift Support, Struts, Made in USA

Suspa C16-09322 C1609322 10" Gas Prop, Quantity (2),

We stock thousands of different Lift supports supplied from various quality manufactures that are not listed here. If we don't list it chances are we can build yours depending on the specifications. Please contact us with the details of your requirements and we can research to find the best supports suited for your needs. Special lengths, different pressures or ends, send us the information. Some other names that lift supports are know for are Gas Springs, Struts, Cylinders, and Prop Rods. Have an existing support with part numbers on it send us any and all numbers that you can point you to the correct Amazon Listing. Gas Charged Lift Supports are energy storage devices which create force by compressing gas inside a cylinder. Unless shown as a universal, each Lift support listed in this Amazon item is specifically manufactured to OEM specifications for the listed application. Each support is tested to perform as well as the original units and in many cases to exceed the manufactures specification. Lift Supports loose pressure over time, even sitting on shelves in most auto parts stores and many of the inventory liquidators on the web. Our primary business is that of lift supports, and we make sure to sell newly produced units. If unsure of a listing please send contact us and we ...

  • Brand: SUSPA
  • ASIN: B007MUY8YK

Axial Racing #AX30092 Axial 72-103MM Shock Set - 10MM Piston (2Pcs) for Axial Ridgecrest Model:

Axial Racing #AX30092 Axial 72-103MM Shock Set -

Aluminum 72-103mm Shock Set (requires assembly) Threaded shock body for easy pre-load adjustment Aluminum shock body for less shock body flex Aluminum cap and adjustable preload spacer Machined Poly Glycol CH2O piston for silky smooth performance and less lateral movement 3.5mm titanium nitride coated (TiNi) shock shaft that reduces lateral movement. Cartridge style bottom helps reduce lateral movement while providing a better seal for less leakage. Silicone diaphragm that provides a more consistent feel and a better seal to prevent leakage. Silicone bushing in the cap holds shock in place while allowing freedom of movement to prevent binding and prevents the shock cap from popping off. Full range of shocks springs available to fine tune the ride (AX30218 Spring 14x70mm 2.07 lbs/in - Super Soft (red) included as standard). Machined flats on shock shafts allow you to hang on to the shaft with pliers for maintenance without scarring the TiNi coating. Dual stage shock pistons included. Three different length rod ends included for adjustable ride height. Rubber bump stops for high speed applications, soften landings from those harsh jump. Can be used as rear shocks for EXO.

  • Brand: Toys & Child
  • ASIN: B012W82KJQ

Axial AX30092 Aluminum 72-103mm Shock Set 10mm Piston

Axial AX30092 Aluminum 72-103mm Shock Set 10mm

This is a set of two optional Axial 72-103mm Aluminum Shocks, and are intended for use with the Axial SCX10.Features: Threaded shock body for easy pre-load adjustment Aluminum shock body for less shock body flex Aluminum cap and adjustable preload spacer Machined delrin piston for silky smooth performance and less lateral movement 3.5mm titanium nitride coated (TiNi) shock shaft that reduces lateral movement Cartridge style bottom helps reduce lateral movement while providing a better seal for less leakage. Silicone diaphragm that provides a more consistent feel and a better seal to prevent leakage. Silicone bushing in the cap holds shock in place while allowing freedom of movement to prevent binding and prevents the shock cap from popping off. Full range of shocks springs available to fine tune the ride (AX30218 Spring 14x70mm 2.07 lbs/in - Super Soft (red) included as standard). Machined flats on shock shafts allow you to hang on to the shaft with pliers for maintenance without scarring the TiNi coating. Dual stage shock pistons included. Three different length rod ends included for adjustable ride height. Rubber bump stops for high speed applications, soften landings from those harsh jumps.

  • Brand: Axial
  • ASIN: B002QS3H54
  • UPC: 885177160982

JR Products BR-1020 10mm Flat Gas Spring Mounting Bracket

JR Products BR-1020 10mm Flat Gas Spring Mounting

Gas spring mounting brackets and replacement ends flat mounting bracket, 2 per package.

  • Brand: JR Products
  • ASIN: B000BRF38Q
  • UPC: 756815005166

Suspa C16-17796 C1617796 20" Gas Prop, Quantity (2), Force 110 Lbs Per Prop, Force Per Set 220 Lbs, Camper Rear Window, Tonneau Cover Lift Supports, Window Lift Support, Struts, Made in USA

Suspa C16-17796 C1617796 20" Gas Prop, Quantity (2),

Made in the USA Gas Prop for Truck Caps and Campers Set of Two Makes Replacements More Economical These Suspa Gas Props are high quality, US-made, and provide years of dependable use. Replacement of both units at the same time is recommended. Set of Two WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Brand: Suspa
  • ASIN: B00FRRBCB2

Integy RC Model Hop-ups C25912 1.1mm 3 Hole 10mm Piston & Spacer Package for C25910 Competition Shock

Integy RC Model Hop-ups C25912 1.1mm 3 Hole

Item C25912 Barcode: 91789021512

  • Brand: Integy
  • ASIN: B00W3ZLV7G

2 Truck Upfitters Gas Props for Undercover Tonneau Covers ONLY. 27.5" extended and 15.6" compressed length (measured from center of ball mounts), 38 pounds of pressure ea. Incl 4 ball mounts!

2 Truck Upfitters Gas Props for Undercover Tonneau

Truck Upfitters Premium Gas Struts for Undercover Style Tonneau Covers (SE, Classic, Elite models) ONLY. These do NOT fit any other brand tonneau covers. Also, these do NOT fit the Ford Sport Trac Undercover Tonneau. Please measure your struts, from center of ball mount to center of ball mount, before replacing with these. Will NOT fit any fiberglass or any other brand tonneaus and lids.

  • Brand: Truck Upfitters
  • ASIN: B01K9BQ3TG
  • UPC: 709832096433

Salice Smove Shock Absorber Soft Close Blumotion Adapter Insert Hidraulik (Medium Resistance)

Salice Smove Shock Absorber Soft Close Blumotion Adapter

1.Soft tip prevents door marring Adjustable piston accommodates various door sizes and overlays spacing and quick mounting Usually Only one Smove required for most doors. For overlays of 3/4" or less, position the Smove horizontally; for overlays of 1" or more, position the Smove vertically 2.Plastic inserts allow Quiet door/drawer closure As the door/drawer opens, pressure is then released allowing the adapter to move forward to receive the door/drawer again

  • Color: Medium Resistance
  • Brand: salice smove
  • ASIN: B00HWNGUHK
  • UPC: 324544456117

Team Losi 10mm Shock Pistons #55 (4)

Team Losi 10mm Shock Pistons #55

10mm Shock Pistons #55 (4)LosiPart LOSA5340

  • Brand: Team Losi
  • ASIN: B000BP15CG
  • UPC: 660132615383

SUSPA C16-04270 Gas Spring (set of 2)

SUSPA C16-04270 Gas Spring (set of

Made in the USAGas Prop for Truck Caps and CampersSet of Two Makes Replacements More EconomicalThese Suspa Gas Props are high quality, US-made, and provide years of dependable use.Replacement of both units at the same time is recommended.Set of Two

  • Color: Black
  • Brand: Suspa
  • ASIN: B0041EBSTS

Dee Zee DZ43204 Tailgate Assist Shock

Dee Zee DZ43204 Tailgate Assist

Dee Zee Tailgate Assist - Safely controls the drop of your truck's tailgate. Custom designed for each make and model. Works in conjunction with factory cables. Tested to handle heavy use with all mounting hardware included. Easy, no drill installation that installs in minutes.

  • Brand: Dee Zee
  • ASIN: B01AP2BNS0
  • UPC: 785422239237

Axial Racing #AX31173 Icon 93-137mm Aluminum Shock Damper Set - 10mm Piston (2pcs) for Axial Yeti

Axial Racing #AX31173 Icon 93-137mm Aluminum Shock Damper

FEATURES Fully licensed by Icon Vehicle Dynamics Clear coated polished aluminum shock bodies, threaded for easy adjustments CNC machined for precise movement throughout the range of motion INCLUDES All components required to assemble two shocks REQUIREMENTS Silicone shock oil of modeler's choice, 30 weight recommended to start Springs of modeler's choice, or reuse stock springs from kit SPECIFICATIONS Compressed Length: 3.7 (93mm) Uncompressed Length: 5.4 (137mm)

  • Brand: Axial
  • ASIN: B00PSL21NU
  • UPC: 816874013042

Maxpow C16-08260 19.7inch 60 lbs Gas Prop/Strut Lift Support Camper Shell Cap Topper Snugtop Tonneau Leer Cover

Maxpow C16-08260 19.7inch 60 lbs Gas Prop/Strut Lift

Fits For: Extended Length: 19.69 Inches? Compressed Length: 11.81 Inches? Force: 267N = 60 Lbs.? Shaft End Fitting: Ball Socket U Band (Nylon)=10mm=3/8"=.39" Body End Fitting: Ball Socket U Band (Nylon)=10mm=3/8"=.39" Package Included: 2pcs Lift Support, 1 LEFT & 1 RIGHT

  • Brand: Maxpow
  • ASIN: B01M590RPH
Similar 10mm Shock Pistons Results
10mm Shock Pistons Video Results
           

Piston Pin Bore Enlargement 17mm to 18mm

10mm Shock Pistons

John Edwards @ Costa Mesa R&D Automotive Machine Shop explains how to enlarger the pin bore on a billet piston from 17mm to 18mm. This is the process where additional material needs to be removed before the bore is honed to size. Don't forget to 'Click' and SUBSCRIBE!

Tags: Piston (Invention),Gudgeon Pin,pin bore enlarge...

Yeah Racing 'Qutus' Big Bore damper - Closer Look!

10mm Shock Pistons

Our upcoming big project - 'QUTUS; Big Bore Damper. 'QUTUS' stand for QUick TUning System. -For 1/10 Touring Car -Big bore cylinder design, for more consistent handling -Come with 10mm & 15mm ball end -Aluminum shock with the quick turning system for any road. More Information will be released, ...

Tags:

How to Remove and Replace a Chair's Gas Cylinder

10mm Shock Pistons

http://www.modernofficefurniture.com/ertaschair.html?utm_source=youtube.com&utm_medium=referral&utm_content=https%3A%2F%2Fyoutu.be%2FpV-wXwoQovc How to Remove and Replace a Chair's Gas Cylinder Modern Office stocks a wide selection of office furniture with fast and free shipping in the 48 contigu...

Tags: replace gas cylinder,chair,office chair,remove,...