Hitachi NT1865DMA 18V Cordless Angled Finish Nailer, Brushless Motor, 15 Gauge, 1-1/4" to 2-1/2" Nails, Compact 3.0 Ah Lithium Ion Battery, Zero Ramp-Up Time, Lifetime Tool Warranty

Hitachi NT1865DMA 18V Cordless Angled Finish Nailer, Brushless

The NT1865DMA 15-Gauge Cordless Angled Finish Nailer allows the user to move easily around the jobsite without hoses or compressors! Equipped with Brushless motor technology and powered by a Compact 3.0Ah Lithium Ion battery, it is capable of driving up to 1,100 nails per charge. It employs a unique air spring drive system (similar to Hitachi's pneumatic line) that uses compressed air to drive each nail resulting in zero ramp up time, increased shooting speed, recoil that feels like a pneumatic nailer, quicker response time between drives, better flush driving-even at an angle, and easy maintenance if the need should arise due to fewer parts to manage. It also features a low battery indicator, selective actuation, tool-less jam release, tool-less depth of drive, variable position belt hook and LED light . This 15-Gauge cordless angled finish nailer drives nails from 1-1/4" to 2-1/2" in length and can be used for a variety of applications including chair rail, install molding, cabinetry and other finish applications.

  • Brand: Hitachi
  • ASIN: B01N8Y1IME
  • UPC: 717709020108

DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer Kit

DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch -

Enjoy the power and efficiency of pneumatic nailing with the DEWALT DC618K heavy-duty 20-degree angled finish nailer kit, which can drive 16 gauge nails from 1-1/4 to 2-1/2 inches in length as rapidly as five nails per second. This cordless nailer is powered by DEWALT's 18-volt XRP batteries, and this kit comes with one battery and a 1-hour charger. The 20-degree angled DC618K nailer(view larger). DC618K 18-Volt, 16 Gauge, 20-Degree Angled Finish Nailer Kit At a Glance: Consistent nail penetration into both soft and hard joints Sequential and bump operating modes Integrated LED lights Includes one battery and 1-hour charger Three-year limited warranty; two-year free service Power and Performance The DC618K's engine design allows the tool to work as fast as you do with consistent nail penetration into both soft and hard joints. The 20-degree angled magazine (with up to 120-nail capacity) will accept DEWALT and Paslode 20-degree nails, and it has a rear-load magazine. You'll have easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches, and the contact trip lock-off allows trigger to be disabled when not in use. Comfort and Convenience You can select sequential operating mode to ensure precision placemen...

  • Brand: DEWALT
  • ASIN: B000MGNITW
  • UPC: 028877596082

DEWALT DC628K XRP 1-1/4-Inch to 2-1/2-Inch 15-Gauge 34 Degree Angled Finish Nailer

DEWALT DC628K XRP 1-1/4-Inch to 2-1/2-Inch 15-Gauge 34

Harness the power and efficiency of pneumatic nailing with the DeWalt DC628K heavy-duty 15-gauge 34-degree angled finish nailer. Designed to work with ANY DeWalt 18-volt battery, this nailer provides fast, consistent nail penetration in both soft and hard materials. You can select sequential operating mode to ensure precision placement of each nail or a bump operating mode that allows you to harness top speed. A unique engine design allows this tool to work as fast as you do, firing up to four or five nails a second for increased productivity. And at just 8.8 pounds, this tool is lightweight for easy maneuvering and reduced operator fatigue. Whatever you're working on, you'll appreciate the little details that separate this intuitively designed tool from similar nailers. Integrated LED lights make it easy to ensure accuracy. An easy-to-operate contract trip lock-off disables the trigger when the tool is not in use for improved safety. The nosepiece is easy to access and clear tool-free if a nail jam occurs. And a six-position dial makes it simple to move between several applications without stopping to re-acquire exact depth settings, saving you time. Additionally, the 34-degree angled, rear-load magazine is easy to handle for quick refills, and it will accept up to 110 DeWalt 34...

  • Color: Yellow
  • Brand: DEWALT
  • ASIN: B000HZJJGY
  • UPC: 028877595665

Ryobi P330 18V ONE+™ Angled 15 Ga Finish Nailer Battery and Charger Not Included

Ryobi P330 18V ONE+™ Angled 15 Ga Finish

The Ryobi 18-Volt ONE+ System introduce the fourth addition to the AirStrike line-up the 18-Volt ONE+ 15-Gauge Angled Finish Nailer. This nailer features Airstrike Technology, which eliminates the need for noisy compressors, bulky hoses or expensive gas cartridges. This means faster setup and easier maneuvering on the job site or at home. The 18-Volt ONE+ Angled Finish Nailer is sold as a bare tool, allowing you to build on your ONE+ collection without spending additional money on batteries and chargers with each tool purchase. The package includes the Angled Finish Nailer, (500) 2 in. 15-Gauge Angled Finish Nails, Belt Clip and Operator's Manual. This tool is backed by a 3 year warranty.

  • Color: Green
  • Brand: Ryobi
  • ASIN: B00XPZX0MW
  • UPC: 033287165605

Senco Fusion F-15 2-1/2" 15 Gauge 18V Li-Ion Cordless Angled Finish Nailer

Senco Fusion F-15 2-1/2" 15 Gauge 18V Li-Ion

Users of the Senco Fusion F-15 angled finish nailer will enjoy the convenience of cordless as well as the ability to fire off a shot immediately, without waiting on ramp-up. This cordless model of finish nail saves the user money, since the need for fuel cells is no more. Instead, this powerful nailer runs on Senco 18V Li-Ion battery models VB0155 and VB0161 (sold separately) to deliver long-lasting, fade-free power on a number of jobs. The F-15 is perfect for professionals in a number of applications, including finish and woodworking, cabinetry, paneling, and casing. Other features of the Senco Fusion F-15 are its tool-free thumbwheel depth-of-drive, its nose-mounted LED light for accuracy, and EZ-clear feature for the occasional jam. This finish nailer accepts 15 gauge 34° angled strip finish nails with a range of 1" to 2-1/2" long. This is a bare tool. It does NOT come with a battery, charger, or case.

  • Brand: Senco
  • ASIN: B071GM2W6C
  • UPC: 685642854831

Hitachi NT1865DMA 18-Volt Cordless 15 Gauge Angled Finish Nailer and DS18DSAL 18-Volt Cordless Driver Drill with Flashlight

Hitachi NT1865DMA 18-Volt Cordless 15 Gauge Angled Finish

  • ASIN: B073R6K6M1

Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless 16-Gauge Angled Finish Nailer Kit W/ (1) 2.0Ah Battery, Charger & Bag

Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless 16-Gauge

Zero ramp-up time

  • Brand: dealmor
  • ASIN: B07JQ5YX91
  • UPC: 791153919898

Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless 15-Gauge Angled Finish Nailer (Tool Only)

Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless 15-Gauge

Compatible with all M18 batteries

  • Brand: dealmor
  • ASIN: B07JQ6H4SP
  • UPC: 791153920016

Factory-Reconditioned Ridgid ZRR250AF18 18V Lithium-Ion 2-1/2-in Angled Finish Nailer

Factory-Reconditioned Ridgid ZRR250AF18 18V Lithium-Ion 2-1/2-in Angled Finish

ZRR250AF18 Factory-Reconditioned Ridgid ZRR250AF18 18V Lithium-Ion 2-1/2" Angled Finish Nailer Fires 18 gauge fasteners 1 1/4-2 1/4" fasteners 6.8 lbs

  • Brand: Ridgid
  • ASIN: B003HLHP5W

DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer Bundle

DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch -

  • Brand: DEWALT
  • ASIN: B00OV7ZH60

Makita XNB01Z 18V LXT Lithium-Ion Cordless 2" Brad Nailer

Makita XNB01Z 18V LXT Lithium-Ion Cordless 2" Brad

The Makita 18V LXT Lithium-Ion Cordless 2" Brad Nailer, 18 Ga. (model XNB01Z, tool only), is an ideal solution for installing narrow trim and molding. The XNB01Z is compact and powerful, and drives a range of 18 gauge brad nails from 5/8" to 2" with a magazine capacity of up to 110 nails. Using the 18V LXT 3.0Ah battery, the XNB01Z will drive up to 1,000 nails on a single charge (attaching plywood to Douglas Fir with 5/8" to 2" nail). For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.

  • Brand: Makita
  • ASIN: B013AQW7M4
  • UPC: 088381669917

Freeman PE2118G 18 Volt 2-in-1 18 Gauge Cordless Nailer & Stapler

Freeman PE2118G 18 Volt 2-in-1 18 Gauge Cordless

The dual functionality and range of features in the Freeman 18 Volt 2-in-1 Nailer and Stapler make it the ideal tool to tackle home improvement jobs including molding and trim, cabinetry, paneling, upholstery, insulation, plastic sheeting, crafts, and other finish work. The cordless electric design provides consistent and reliable performance due to the powerful 18 Volt lithium ion battery, eliminating the need to drag around a loud and heavy compressor or worry about tripping over a long air hose. Charging in only 45 minutes, the battery fires up to 400 shots per charge and 30 fasteners per minute so you can get more done, faster. This kit includes the 18 Volt 2-in-1 Electric Nailer & Stapler, two 18V lithium-ion batteries, a quick charger, 500 brad nails, 500 staples, two hex keys, and a hard-sided blow mold case to store it all when you are done.The PE2118G features a 2-in-1 bottom-load magazine that is compatible with both 18 gauge brad nails (3/4” to 2”) and 18 gauge 1/4” narrow crown staples (3/4” to 1-5/8”) for maximum versatility. Select either the single firing mode on the side panel to ensure precise fastener placement, or switch to the bump fire contact mode for faster firing speeds. Use the tool-free depth adjustment wheel to customize the firing depth, maki...

  • Color: orange, black
  • Brand: Freeman
  • ASIN: B0753NSHRK
  • UPC: 816376016183

Powernail 2.5# White Weighted Mallet

Powernail 2.5# White Weighted

The choice of a mallet can make a big difference in the installation of your floor. The Powernail 3MI rubber mallet is approximately 2.5 lbs. with a white rubber cap and malleable iron wedge. This mallet's lower weight is perfect for operating a wide range of Pneumatic Floor Nailers and Staplers. All of Powernail's mallets have handles made of American Hickory and are designed for a comfortable grip. The 3MI comes with a white rubber no mar-cap and an iron wedge head combination. Made in the USA, these are the professionals' first choice.

  • Brand: Powernail
  • ASIN: B00L4N3PMC
  • UPC: 725620004572

Dewalt DC616 / DC618 Nailer (2 Pack) Replacement No-mar Tip Pad # 616938-00-2pk

Dewalt DC616 / DC618 Nailer (2 Pack) Replacement

Includes (2) 616938-00 No-Mar Pads. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with: DeWALT: DC618N Type 1 Angled Nailer, DC618A Type 1 Angled Nailer, DC616N Type 1 Finish Nailer, DC616A Type 1 Finish Nailer, DC614N Type 1 Angled Finish Nailer, DC614A Type 1 Angled Finish Nailer, DC612N Type 1 Finish Nailer, DC612A Type 1 Finish Nailer, DC617A Type 1 Straight Magazine Kit, DC619A Type 1 Angled Nailer, DC628 Type 1 Finishing Nailer, DC628 15GA Finish Nailer, DC628KA Type 1 Cordless 18V Finishing Nailer, DC616KA Nailer, DC616KN Nailer, DC618K (Type 1) 16 Ga Angled Cordless Nailer

  • Brand: DEWALT
  • ASIN: B00QMKS7XE
  • UPC: 704660075605

Dewalt DC6818/DC616 Nailer Replacement (2 Pack) OEM Band # 392243-00-2pk

Dewalt DC6818/DC616 Nailer Replacement (2 Pack) OEM Band

Includes (2) 392243-00 Bands. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with: DeWALT: DC618N Type 1 Angled Nailer, DC618A Type 1 Angled Nailer, DC616N Type 1 Finish Nailer, DC616A Type 1 Finish Nailer, DC614N Type 1 Angled Finish Nailer, DC614A Type 1 Angled Finish Nailer, DC612N Type 1 Finish Nailer, DC612A Type 1 Finish Nailer, DC617A Type 1 Straight Magazine Kit, DC619A Type 1 Angled Nailer, DC628 Type 1 Finishing Nailer, DC608K 18V Nailer, DC628 15GA Finish Nailer, DC628KA Type 1 Cordless 18V Finishing Nailer, DC608B Type 1 18V Nailer, DC616KA Nailer, DC616KN Nailer

  • Brand: DEWALT
  • ASIN: B00GUTV1DU
  • UPC: 704660039447

Dewalt DC616 / DC618 Nailer (5 Pack) Replacement No-mar Tip Pad # 616938-00-5pk

Dewalt DC616 / DC618 Nailer (5 Pack) Replacement

Includes (5) 616938-00 No-Mar Pads. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with: DeWALT: DC618N Type 1 Angled Nailer, DC618A Type 1 Angled Nailer, DC616N Type 1 Finish Nailer, DC616A Type 1 Finish Nailer, DC614N Type 1 Angled Finish Nailer, DC614A Type 1 Angled Finish Nailer, DC612N Type 1 Finish Nailer, DC612A Type 1 Finish Nailer, DC617A Type 1 Straight Magazine Kit, DC619A Type 1 Angled Nailer, DC628 Type 1 Finishing Nailer, DC628 15GA Finish Nailer, DC628KA Type 1 Cordless 18V Finishing Nailer, DC616KA Nailer, DC616KN Nailer, DC618K (Type 1) 16 Ga Angled Cordless Nailer

  • Brand: DEWALT
  • ASIN: B00QMKSALS
  • UPC: 704660075612

Dewalt DC6818/DC616 Nailer Replacement (5 Pack) OEM Band # 392243-00-5pk

Dewalt DC6818/DC616 Nailer Replacement (5 Pack) OEM Band

Includes (5) 392243-00 Bands. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with: DeWALT: DC618N Type 1 Angled Nailer, DC618A Type 1 Angled Nailer, DC616N Type 1 Finish Nailer, DC616A Type 1 Finish Nailer, DC614N Type 1 Angled Finish Nailer, DC614A Type 1 Angled Finish Nailer, DC612N Type 1 Finish Nailer, DC612A Type 1 Finish Nailer, DC617A Type 1 Straight Magazine Kit, DC619A Type 1 Angled Nailer, DC628 Type 1 Finishing Nailer, DC608K 18V Nailer, DC628 15GA Finish Nailer, DC628KA Type 1 Cordless 18V Finishing Nailer, DC608B Type 1 18V Nailer, DC616KA Nailer, DC616KN Nailer

  • Brand: Black & Decker
  • ASIN: B00GUTV1US
  • UPC: 704660039454

Ridgid R86006 Drill Replacement (2 Pack) 18V 1.5Ah Lithium-Ion Battery # 130383001-2pk

Ridgid R86006 Drill Replacement (2 Pack) 18V 1.5Ah

Includes (1) 130383001 Batteries. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with: Ridgid: R8408 Cordless Radio Scanner, R86006 Cordless Drill, R250AF18 Angled Finish Nailers

  • Brand: Ridgid
  • ASIN: B010C7MYK4
  • UPC: 719896896276

Ridgid 130383025 18V 1.5 Ah Lithium-Ion Battery

Ridgid 130383025 18V 1.5 Ah Lithium-Ion

Includes (1) 130383025 Battery. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Replaces obsolete part(s) : 130383028, 200901020, 130383028 and 130383001. Compatible with: Ridgid: R8408 Cordless Radio Scanner, R86006 Cordless Drill, R250AF18 Angled Finish Nailers

  • Brand: Ridgid
  • ASIN: B006J028EQ
  • UPC: 704660003714

Ridgid R840091 Lithium Ion 9.6v- 18v Battery Charger (2-PACK) # 140154001-2PK

Ridgid R840091 Lithium Ion 9.6v- 18v Battery Charger

Includes (2) 140154001 Battery Chargers. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with: Ridgid : R81030 Cordless Pivoting Screwdriver R820011 Cordless Drill, R830153 Cordless Drill-Driver R84040 Cordless Adhesive/Caulk Gun, R8408 Cordless Radio Scanner R84230 Cordless Impact Driver, R8433 Cordless Jig Saw R888 Cordless Hand , R8841 18 Volt / 24 Volt MaxSelect Cordless Reciprocating Saw R884 18V/24V MaxSelect™ Cordless Reciprocating Saw, R883 Cordless Jig Saw R8823 Cordless Impact Driver, R8804 Adhesive/Caulk Gun R86006 Cordless Drill, R849 18.0 Volt Flashlight R82001 12V 2 Speed Cordless Drill, R82015 (After G0343) 12V 2 Max HC Speed Cordless Drill / Driver R82320 Impact Driver, R83001 (after G0344) 14.4V 2 Speed Cordless Drill / Driver R83001 (before G0344) 14.4V 2 Speed Cordless Drill / Driver, R83015 (after G0343) 14.4V Max HC 2 Speed Cordless Drill / Driver R83015 (before G0343) 14.4V Max HC 2 Speed Cordless Drill / Driver, R84001 (after G0344) 18V 2 Speed Cordless Drill / Driver R84001 (before G0344) 18V 2 Speed Cordless Drill / Driver, R84015 (after G0304) 18V Max HC 2 Speed Cordless Drill / Driver R84015 (before G0304) 18V Max HC 2 Speed Cordless Drill / Driver, R841150...

  • Brand: Ridgid
  • ASIN: B00C1SBWCE
  • UPC: 704660004629
Similar 18v Angled Finish Nailer Results
18v Angled Finish Nailer Video Results
           

Ryobi 18V Airstrike 15 Gauge Angled Finish Nailer P330 Review

18v Angled Finish Nailer

Review of the newest cordless Ryobi Airstrike 18 volt 15 gauge nailer model P330 features and performance Visit http://www.toolcraze.net for more tool reviews Filmed with: Panasonic G6 Camera http://amzn.to/24Jjc5r Lenses used: Panasonic 14-42mm F3.5-5.6 http://amzn.to/1qctNX6 Audio input: So...

Tags: cordless,Ryobi (Business Operation),tools in ac...

Dewalt DCN650D1 15 GA Cordless, Angled, Finish Nailer Review

18v Angled Finish Nailer

Dewalt DCN650D1 15 GA Cordless Angled Finish Nailer Kit. http://www.toolboxbuzz.com/cordless-tools/dewalt-dcn650d1-15-ga-cordless-angled-finish-nailer-kit/ The DEWALT DCN650 15 Gauge Angled Finish Nailer drives 15 Gauge, “DA” style, angled finish nails, sizes ranging from 1-1/4″ to 2-1/2.” The...

Tags: diy,how to,step by step,tools,reviews,carpentry...

Milwaukee M18 FUEL 18 Volt 15 Gauge Angled Finish Nailer Review

18v Angled Finish Nailer

Price the Milwaukee 15ga Nailer on Amazon: http://amzn.to/2acOvSF Is the Milwaukee M18 fuel 15 gauge nailer, model 2743-20, up to the task, or meant to replace pneumatic nailers on the jobsite? That is the question we plan to answer for you through our testing. The internal system use by Milwau...

Tags: milwaukee,nailer,tools,m18,carpentry,how to,con...