Loctite Heavy Duty Threadlocker, 0.2 oz, Blue 242, Single

Loctite Heavy Duty Threadlocker, 0.2 oz, Blue

209728 Features: -Threadlocker. -Medium strength. -Locks threaded fasteners against vibration loosening. -Prevents leaks and rusting of threads. Product Type: -Threadlocker. Dimensions: Overall Height - Top to Bottom: -6.5 Inches. Overall Width - Side to Side: -3.81 Inches. Overall Depth - Front to Back: -0.69 Inches. Overall Product Weight: -0.05 Pounds.

  • Color: Blue
  • Brand: Henkel
  • ASIN: B000I1RSNS
  • UPC: 079340242005

Henkel Loctite 242 Nut & Bolt Threadlocker, 50mL

Henkel Loctite 242 Nut & Bolt Threadlocker,

* To prevent hardening, the anaerobic adhesive should be in contact with air. A large 120ml container was filled with 50ml of contents. There is only half of the bottle, but the contents are 50ml. * Safety Precautions Keep out of reach of children. * Preparation Protect work area. Parts to be sealed must be clean and dry. Shake the product thoroughly before use. Note: To prevent the product from clogging in the nozzle, avoid touching the bottle tip to the metal surface. * Application For Thru Holes: Apply several drops of the product onto the bolt at the nut engagement area. For Blind Holes: Apply several drops of the product down the internal threads to the bottom of the hole. Assemble parts and tighten as required. Sets in approximately 10 minutes and fully cures in 24 hours. * Cleanup Clean adhesive residue immediately with a damp cloth. Cured product can be removed with a combination of soaking in methylene chloride and mechanical abrasion such as a wire brush. For disassembly, shear with standard hand tools and remove with methylene chloride. In rare instances where hand tools do not work because of excessive engagement length, apply localized heat to nut or bolt to approximately 482°F (250°C). Disassemble while hot.

  • Color: Blue
  • Brand: Loctite
  • ASIN: B01N9A9O9L

Loctite Heavy Duty Threadlocker, 0.2 oz, Blue 242, 6 Pack

Loctite Heavy Duty Threadlocker, 0.2 oz, Blue

  • Brand: Loctite
  • ASIN: B013JSVTP4

Loctite 24241 Blue 242 Medium Strength Threadlocker, 250 mL Bottle

Loctite 24241 Blue 242 Medium Strength Threadlocker, 250

Threadlocker, Threadlocker, Threadlocker Strength Medium, Threadlocker Color Blue, Chemical Type Anaerobic, Threadlocker Container Bottle, 250mL, Physical Form Liquid, For Fastener Dia. 1/4 In. to 3/4 In. , Series 242, Gap Fill 0. 005 In. , Full Cure 24 hr. , Application Time 10 min. , Application Temp. Range 72 Degrees F, Performance Temp. Range -65 Degrees to 300 Degrees F, Flash Point Greater Than 93. 3 Degrees C, Specific Gravity 1. 1, Viscosity 1200 to 5000 cP, Removable With Tools

  • Color: Blue
  • Brand: Loctite
  • ASIN: B00065U8K6
  • UPC: 079340242418

Loctite 242 Threadlocker - Blue Liquid 1.69oz Bottle

Loctite 242 Threadlocker - Blue Liquid 1.69oz

The original Liquid capacity is approximately a little less than 1/2 of bottle. Because, a size of bottle is 9 x 5.5 x 2.5(cm).

  • Color: Blue
  • Brand: Henkel
  • ASIN: B002P8LQ1C

Loctite 37418 242 Blue Medium Strength Threadlocker Tube, 6-milliliter

Loctite 37418 242 Blue Medium Strength Threadlocker Tube,

Loctite Threadlocker 242 is an all-purpose, medium strength, blue threadlocker. Ideal for all nut and bolt applications 1⁄4" to 3⁄4" (6 mm to 19 mm). Eliminates the need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Typical Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs.

  • Color: Blue
  • Brand: Loctite
  • ASIN: B000FIXQXK
  • UPC: 826732897356

Loctite 1330906 243 Medium Strength Surface Insensitive Threadlocker, 36-milliliter Tube

Loctite 1330906 243 Medium Strength Surface Insensitive Threadlocker,

Loctite 243 Medium Strength Surface Insensitive thread locker features a general purpose, medium strength, blue thread locker with a high oil tolerance. It has a higher temperature range than all the other blue thread lockers at 360F. For fasteners between 1⁄4" to 3⁄4" (6 mm to 19 mm). Parts can be separated using hand tools. Typical applications include Rocker studs, rocker adjustment bolts, bolts on valve and cam covers, oil pans, disc brake calipers, intakes and alternators, and pulley assemblies.

  • Brand: Loctite
  • ASIN: B005M1RI84
  • UPC: 079340439092

Loctite 1329467 243 Blue Medium Strength Threadlockers, 1.69 oz., 50 mL, 3/4" Thread

Loctite 1329467 243 Blue Medium Strength Threadlockers, 1.69

Primeless Thread locker, Primeless Thread locker, Thread locker Strength Medium, Thread locker Color Blue, Chemical Type Anaerobic, Thread locker Container Bottle, 50mL, Physical Form Liquid, For Fastener Dia. 1/4 In. to 3/4 In. , Series 243, Gap Fill 0. 005 In. , Full Cure 24 hr. , Application Time 10 min. , Application Temp. Range 72 Degrees F, Performance Temp. Range -65 Degrees to 360 Degrees F, Flash Point Greater Than 93 Degrees C, Specific Gravity 1. 08, Viscosity 1300 to 3000 cP

  • Color: Blue
  • Brand: Loctite
  • ASIN: B009I2UC3Q
  • UPC: 632963650116

Permatex 24300 Surface Insensitive Threadlocker Blue, 0.34 oz.

Permatex 24300 Surface Insensitive Threadlocker Blue, 0.34

Permatex Surface Insensitive Threadlocker Blue is a medium/high strength threadlocker for general-purpose applications. Especially well-suited for 6mm to 20mm fasteners that have a slight oil film, this threadlocker prevents loosening due to vibration. Oil resistant and removable with hand tools for easy disassembly. Applied as a liquid or gel, threadlockers are superior to conventional lock washers, nylon inserts, and other mechanical devices because they secure the entire fastener assembly against loosening from shock and vibration by filling the space between threaded metal parts, curing to form a tough, adhesive bond and seal. They also seal the threads against leakage, preventing rust and corrosion.

  • Color: Blue
  • Brand: Permatex
  • ASIN: B000HBM5TQ
  • UPC: 079340243002

Loctite 506166 Blue Medium Strength Threadlocker Stick, 9-Gram

Loctite 506166 Blue Medium Strength Threadlocker Stick,

This medium strength anaerobic threadlocker offers the same locking strength and sealing capabilities as our traditional blue threadlocking liquid. This wax-like stick is conveniently packaged in a seld-feeding stick applicator. It is well-suited for difficult repairs, as in overhead applications. It can be applied to a part even if assembly is to take place at a later time, making the stick for volume assembly. Removable with hand tools. Great for valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts and carburetor studs.

  • Color: Blue
  • Brand: Loctite
  • ASIN: B0053ZNMDE
  • UPC: 115971648851

Vibra-TITE 121 Medium Strength Removable Anaerobic Threadlocker, 10ml Bottle, Blue

Vibra-TITE 121 Medium Strength Removable Anaerobic Threadlocker, 10ml

Vibra-TITE 121 Medium Strength Threadlocker is a general purpose product. 121 will hold all metric, imperial or conventional sized nuts and bolts, meeting the requirements of over 80 percent of fastening applications. It does not run off or drip and does not migrate after assembly due to its thixotropic chemistry. Once applied, parts install easily, lubricated by the adhesive. Vibra-TITE 121 replaces lock washers, plastic inserts and locks machine access bolts, and hydraulic system bolts. Used on gear box bolts, drive shaft fasteners, bearing cover cap screws, counter sunk screws, conveyor roller bolts and construction equipment. Ensure parts are clean, dry and free from oil and grease before use. Product is normally hand applied from the bottle onto threaded parts. Fixture Speed without Primer is 20 minutes at 77/F. Shelf Life is 12 months at 68 degree F. 24 hours at 68 degree F Full Cure Time. 100-200 inches/lbs Typical Breakaway Strength. 30-60 inches/lbs Typical Prevailing Strength. Product should be stored in a cool and dry location at temperatures between -10 degree C to 30 degree C. Optimal storage is 22 +/- 4 degree C. Shelf life is 18 months from date of manufacture when stored at 22 +/- 4 degree C. Seals nuts and bolts ranging from 1/4'' to 3/4'' (6-20mm) in diameter wh...

  • Color: Blue
  • Brand: Vibra-TITE
  • ASIN: B0025PSNKM
  • UPC: 745619121103

Loctite Threadlocker 242, 50mL Bottle, Blue

Loctite Threadlocker 242, 50mL Bottle,

Threadlocker, Threadlocker, Threadlocker Strength Medium, Threadlocker Color Blue, Chemical Type Anaerobic, Threadlocker Container Bottle, 50mL, Physical Form Liquid, For Fastener Dia. 1/4 In. to 3/4 In. , Series 242, Gap Fill 0. 005 In. , Full Cure 24 hr. , Application Time 5 min. , Application Temp. Range 72 Degrees F, Performance Temp. Range -65 Degrees to 300 Degrees F, Flash Point Greater Than 93. 3 Degrees C, Specific Gravity 1. 1, Viscosity 1200 to 5000 cP, Removable With Tools

  • Brand: Loctite
  • ASIN: B001Q5GOE4
  • UPC: 175214703044

Loctite 26231 Red 262 High-Strength Threadlocker, 1.69 fl. oz. Bottle

Loctite 26231 Red 262 High-Strength Threadlocker, 1.69 fl.

Thread locker, Thread locker, Thread locker Strength High, Thread locker Color Red, Chemical Type Anaerobic, Thread locker Container Bottle, 50mL, Physical Form Liquid, For Fastener Dia. Up to 3/4 In. , Series 262, Gap Fill 0. 005 In. , Full Cure 24 hr. , Application Time 10 min. , Application Temp. Range 72 Degrees F, Performance Temp. Range -65 Degrees to 300 Degrees F, Flash Point Greater Than 93. 3 Degrees C, Specific Gravity 1. 05, Viscosity 1800 to 5000 cP, Removable With Heat and Tools

  • Color: Red
  • Brand: Loctite
  • ASIN: B002I05BWC
  • UPC: 789164353954

Genuine Henkel Loctite 242 Medium strength -Medium Viscosity - Threadlock - All Metal Adhesive - Glue 50 ML

Genuine Henkel Loctite 242 Medium strength -Medium Viscosity

LOCTITE 242 is a medium strength, medium viscosity, methacrylate-based threadlocking adhesive offering general purpose qualities. The product provides quick fixture times on steel, brass and stainless steel of 5, 15 and 20 min respectively. LOCTITE 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools..Your benefitsMedium strengthMedium viscosityQuick fixture timeEasy to applyThixotropic to reduce adhesive migrationWarning Always read material safety data sheet and technical data sheet before using the product. Keep away from children.Please Note: The Volume in the bottle/tube is as described, but company has increased the size of the bottles then the normal for some safety norms during the shipment.

  • Brand: LOCTITE 242
  • ASIN: B072JTWLT2

Loctite 231926 Red 262 High Strength Thread Locker, 10 mL Bottle

Loctite 231926 Red 262 High Strength Thread Locker,

Loctite(R) 262(TM) Thread locker is a permanent thread locker for fasteners up to 3/4" (20 mm) in diameter. Excellent for preventing rust and corrosion in extreme chemical/environmental conditions.

  • Color: Red
  • Brand: Loctite
  • ASIN: B00B748Y1U
  • UPC: 079340262218

Genuine Henkel Loctite 242 Blue Medium Strength Threadlocker, 250 mL Bottle

Genuine Henkel Loctite 242 Blue Medium Strength Threadlocker,

LOCTITE 242250ML is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Particularly suitable for applications on less active substrates such as stainless steel and plated surfaces, where disassembly with hand tools is required for servicing. The thixotropic nature of LOCTITE 24

  • Brand: Loctite
  • ASIN: B07D4K4L2N

Loctite 1329837 243 Blue Medium Strength Threadlockers, 0.34 oz., 10 mL, 3/4" Thread

Loctite 1329837 243 Blue Medium Strength Threadlockers, 0.34

Loctite 243 Primerless Threadlocker is an oil-tolerant, removable, medium-strength, blue threadlocker designed for the locking and sealing of threaded fasteners between 1/4" and 3/4". It not only works on active metals, but also on passive substrates such as stainless steel and plated surfaces. It tolerates minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids.

  • Color: Blue
  • Brand: Loctite
  • ASIN: B004VODM24
  • UPC: 079340438996

Vibra-TITE 140 Permanent High Strength Anaerobic Threadlocker, 50 ml Bottle, Red

Vibra-TITE 140 Permanent High Strength Anaerobic Threadlocker, 50

Vibra-TITE 140 High Strength Threadlocker is a red general purpose adhesive for permanent threaded assemblies. 140 locks fasteners up to 1" in diameter sealing against leakage and corrosion. It resists attack from most fuels, lubricants and most industrial gases. Eliminates double nutting and or welding of critical assemblies. The product’s viscosity can be used on fine to medium threaded parts that will not require periodic disassembly. Ensure parts are clean, dry and free from oil and grease before use. Product is normally hand applied from the bottle onto threaded parts. Fixture Speed with Primer is

  • Color: Red
  • Brand: Vibra-TITE
  • ASIN: B0025PKOEK
  • UPC: 745619140500

Loctite 135354 Blue 079340-24221-BO 242 Removable Thread Locker, 3/4" Length x 1/4" Width, 10 mL

Loctite 135354 Blue 079340-24221-BO 242 Removable Thread Locker,

10 ml Bottle. Elegant design and finish. The product is manufactured in United States.

  • Color: Blue
  • Brand: Loctite
  • ASIN: B00A70IMH6
  • UPC: 646444356770

Henkel Loctite 242 250ml Threadlocker Medium Strength Glue

Henkel Loctite 242 250ml Threadlocker Medium Strength

LOCTITE 242 250ml

  • Brand: Loctite
  • ASIN: B013SCDK3A
  • UPC: 721577266407
Similar 242 Threadlocker Results
242 Threadlocker Video Results
           

In the Lab with LOCTITE® - Proper Use of Threadlocker

242 Threadlocker

Host Phil Godeck and Henkel Engineer, Andrew Paluch, demonstrate how to properly apply LOCTITE® anaerobic threadlockers to achieve maximum benefits. LOCTITE® Anaerobic Threadlockers: http://na.henkel-adhesives.com/industrial/choosing-a-loctite-threadlocker-14075.htm

Tags: Henkel,LOCTITE,threadlocker,anaerobic threadlocker

Quick Tip: How to properly use Loctite.

242 Threadlocker

Gun Tech Steve Ostrem shows us the proper use of Loctite while mounting a scope in rings. #242 Blue Thread-locker 532-242-006 #271 Red Thread-locker 10mL Bottle 532-271-006 #248 Thread-locker Stick 532-000-004 #222 Thread-Locker 532-222-010 #290 Thread-Locker 532-290-006 #620 10mL Tube 532-...

Tags: Quick Tip,Loctite,adhesive,Mounting scope rings...

Loctite 242 vs 243 and 2701 Equivalents for KTM or BMW Motorcycles

242 Threadlocker

Both the KTM and BMW service manuals call out for Loctite 2701, a product that cannot be found in North America. When researching this product I found myself learning some interesting information about thread lockers that I thought I would share. In this video I go into detail about thread lock...

Tags: loctite 243,loctite 242,loctite 2701,loctite 27...