AEM 30-4406 -30-35 PSI Boost Gauge

AEM 30-4406 -30-35 PSI Boost

AEM’s digital Boost display gauge delivers unsurpassed accuracy and visibility. Each gauge includes 24 color-coded (Red, Green, Yellow) LED lights that change from green to yellow to red for immediate reference to the measured parameter, and an integrated thee-digit display that reveals real-time operating conditions. AEM’s digital display gauges feature a standard 52mm gauge housing that fits in most gauge pods and can be remotely mounted virtually anywhere. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge—it’s like having four gauge designs in one!

  • Brand: AEM
  • ASIN: B001DX7KMY
  • UPC: 840879016524

AEM 21-699C Cold Air Intake System

AEM 21-699C Cold Air Intake

AEM Cold Air Intake Systems are designed to produce horsepower and torque gains. They replace the restrictive factory airbox and air filter to give you better performance and better engine sound. AEM cold air intakes relocate the air filter outside the engine compartment so cooler air can be fed into your engine. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber for more horsepower and torque. AEM Cold Air Intakes include an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration, and performance while allowing easy oil-free cleaning. They include a mandrel-bent aluminum intake tube and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. This Air Intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

  • Color: Gunmetal Gray
  • Brand: AEM
  • ASIN: B0070WAVNC
  • UPC: 024844281340

AEM 52mm Digital Gauge Kit Oil Pressure 150psi & Turbo Boost 30-35 w/MAP Lanyard Black

AEM 52mm Digital Gauge Kit Oil Pressure 150psi

AEM's Digital Boost Display Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays boost in 1 PSI increments, and a sweeping LED "needle" that lines the edge and moves as boost from 0 to up to 35 PSI. The boost gauge's digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.Ideal for carbureted or EFI vehicles Easy-to-install Plug & Play harness and sensor included Each gauge comes with interchangeable black/silver bezels and black/white faceplates 0-5V analog output included for use with data loggers and virtually any engine management system Auto-dimming gauge face and read out lighting Brass sensor included Standard 52mm (2-1/16”) gauge housing 30-4406 displays boost from -30 - 35 PSIAEM Digital Oil Pressure Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays oil pressure in 1 PSI increments, and a sweeping LED "needle" that lines the edge and moves as oil pressure changes from 0 to 150. The oil pressure gauge's digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.Ideal for carbureted or EFI vehicles Easy-to-install Plug & Play...

  • Brand: AEM
  • ASIN: B01NACQQCM
  • UPC: 796716568797

AEM (30-4110) UEGO Air/Fuel Ratio Gauge

AEM (30-4110) UEGO Air/Fuel Ratio

Our World-famous Wideband O2 air/fuel ratio UEGO gauge features a digital LED display and sweeping LED 'needle' that changes colors as AFR changes from rich to lean. A 52mm (2-1/16") gauge housing ensures that it will fit in most gauge pods and can be remotely mounted virtually anywhere. All AEM digital gauges feature a 0-5V analog output for use with data loggers and almost any engine management system. Each gauge comes with black and silver bezels and black and white faceplates for multiple color combinations and a custom look (a black Lambda faceplate and black and white Air/Fuel Ratio faceplates). The Bosch UEGO sensor gives the controller its speed and accuracy. The Bosch 4.9 LSU sensor used in the AEM Wideband UEGO AFR Controller Gauge has a faster light off time and draws less current than the 4.2 LSU sensor used with AEM's 30-4100 Wideband UEGO Controller Gauge, which will be superseded to the gauge in August, 2014. The 4.9 LSU sensor features the same fuel compatibility as the 4.2 LSU and NEVER requires free-air calibration when used with AEM's Wideband UEGO AFR Gauge. The 4.9 LSU sensor uses a different connector than the connector used with the 4.2 LSU sensors included with the original 30-4100 gauge controller. The sensors are not interchangeable between the two gauge...

  • Brand: AEM
  • ASIN: B00N3VGPYS
  • UPC: 640206582889

AEM 52mm X-Series Gauge Kit Wideband Air/Fuel & Oil/Fuel Pressure & Boost Turbo w/MAP Lanyard Black

AEM 52mm X-Series Gauge Kit Wideband Air/Fuel &

The X-Series Wideband UEGO AFR Sensor Controller Gauge (PN 30-0300) measures 2 1/16th-inch (52mm) in diameter, and features a modern, visually striking faceplate and new seven-segment center display that is 87% larger than the 30-4110 AEM Wideband Gauge’s center display. This creates the perception of a larger overall gauge, but in a common 52mm size for easy mounting. Its slim depth (less than one inch overall) and ultra slim cup depth of .200-inches dramatically increases its application base and potential mounting locations.X-SERIES WIDEBAND UEGO CONTROLLER FEATURES:X-Series Wideband UEGO AFR Controller Gauge were fastest responding wideband air/fuel ratio controllers in an independent test vs. 17 competitor wideband AFR controllers Includes Bosch 4.9LSU wideband UEGO sensor Factory calibrated resistor does not require free-air calibration, but technology allows for free-air calibration as sensor ages if user desires Compatible with vehicle/system voltages up to 16V 0-5V & RS232 output for data logging and feedback control, AEMnet (CANbus) for data logging and daisy-chaining multiple controllers up to 16 cylinders Can display AFR values in hundredths of % 52mm gauge diameter and slim 0.825” gauge depthAEM’s 30-0301 X-Series 100 PSI/7 BAR Digital Oil/Fuel Pressure gauge c...

  • Brand: AEM
  • ASIN: B01N47ID7K
  • UPC: 796716568889

AEM (30-3300) V2 1-Gallon Water/Methanol Injection Kit with Internal MAP Sensor

AEM (30-3300) V2 1-Gallon Water/Methanol Injection Kit with

Water/Methanol injection for gas engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation on forced induction and high performance naturally aspirated race engines. This allows racers to reliably increase boost and advance ignition timing-without using high-octane racing fuel-for power gains of up to 20 percent. AEM's Water/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water/methanol system. The on-demand progressive controller in AEM's Boost Dependent Water/Methanol Injection kit bases injection flow on manifold pressure using an on-board MAP sensor (up to 35 PSI of boost) to ensure the proper amount of water/methanol injection at all points along an engine's power curve.

  • Color: Black
  • Brand: AEM
  • ASIN: B00GSBKNF2
  • UPC: 840879022600

AEM 30-0306 X-SERIES TURBO BOOST PRESSURE DISPLAY GAUGE 35PSI + WHITE FACE KIT

AEM 30-0306 X-SERIES TURBO BOOST PRESSURE DISPLAY GAUGE

AEM’s 30-0306 X-Series -30in/Hg~35PSI / -1~2.5BAR Digital Boost Display gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate boost pressure readouts up to 35 PSI or 2.5 BAR in their high performance vehicle.2-1/16th (52mm) gauge diameter for easy mounting in gauge pods Slim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere! Programmable center LED is 87% larger than original AEM gauges 24 green outer LEDs for quick reference to engine parameter User selectable standard or metric display ( -30in/Hg~35PSI / -1~2.5BAR) Peak/Recall via gauge face buttons User selectable threshold warnings Optional silver bezel and white faceplate accessory kit included. AEMnet CANbus-enabled for transmitting data to EMS or Data Logger 0-5v analog outputs for transmitting data to EMS or Data Logger Auto dimming sensor delivers ideal display brightness Positive locking connectors provide secure connection

  • Color: Black
  • Brand: AEM
  • ASIN: B01FGDLPV8
  • UPC: 730656668995

AEM 30-2400 Boost Control Solenoid Kit

AEM 30-2400 Boost Control Solenoid

AEM offers several sensor and Plug & Pin connector kits for vehicles that require additional outputs and/or upgraded hardware over existing sensors. Available sensors include boost/backpressure sensors, exhaust gas temperature (EGT) sensors, nitrous oxide/brake pressure sensors, UEGO replacement sensors, inlet air temp sensors (IAT), K-Type sensors and more. All sensors come with a three- wire mating connector with 12" leads for ease of installation.

  • Brand: AEM
  • ASIN: B0012USLLC
  • UPC: 840879015015

AEM 30-3003 Water/Methanol Injection Filter

AEM 30-3003 Water/Methanol Injection

The AEM Water/Methanol Injection Filter is an in-line filter that uses a micronic mesh screen to filter particulates as small as 40 microns. This allows a cleaner flow of water/methanol to be passed into the engine, not only protecting the internals of the engine itself, but also the working parts of the water/methanol pump too. Run the AEM Water/Methanol Injection Filter in-line before the pump to protect both pump and engine. If you are using a Water/Methanol Injection System it may greatly increase pump life to use a water/methanol filter. The AEM Water/Methanol Injection Filter prevents foreign particles as small as 40 microns from clogging or damaging pumps, injection nozzles check valves or flow sensors. The AEM Water/Methanol Injection Filter uses fittings for use with 1/4inches OD nylon tubing, so it fits most Water/Methanol injection kits on the market today.

  • Brand: AEM
  • ASIN: B0032W3KH8
  • UPC: 840879020941

AEM 30-2130-150 150 PSIG Sensor Kit

AEM 30-2130-150 150 PSIG Sensor

AEM offers several sensor and Plug & Pin connector kits for vehicles that require additional outputs and/or upgraded hardware over existing sensors. Available sensors include boost/backpressure sensors, exhaust gas temperature (EGT) sensors, nitrous oxide/brake pressure sensors, UEGO replacement sensors, inlet air temp sensors (IAT), K-Type sensors and more. All sensors come with a three- wire mating connector with 12" leads for ease of installation.

  • Brand: AEM
  • ASIN: B001DX58PU
  • UPC: 840879013318

2016-2017-2018-2019 Polaris RZR XPT Turbo Billet Blow Off Valve Kit

2016-2017-2018-2019 Polaris RZR XPT Turbo Billet Blow Off

Direct Fit - Fits any 2016-2019 Polaris RZR Turbo Model. Long Service Life - Rated for Abuse in All Terrains, this BOV Kit will outlast our competitors valves. Vacuum Tight - This valve has internal o-rings mating the piston with the casing to provide superb and flawless functionality. It will hold vacuum and not leak like other cheap valves. Save $$$ on Repairs - The stock valve on your XPT just doesn't withstand the abuse you throw at it. Its made from thin plastic and when you jump on the skinny pedal, the high boost and heat will just trash that plastic valve. Don't get caught up in that situation and change your OEM valve with this awesome BOV Kit. Complete Kit - Comes complete with the Billet Valve, Billet Blanking Plug and a Valve Filter to keep all dust out of the system!

  • Color: Black
  • Brand: AEM LED Lighting
  • ASIN: B07PXN1BJT
  • UPC: 093674083356

AEM 50-1000 High Flow In-Tank Fuel Pump

AEM 50-1000 High Flow In-Tank Fuel

AEM's High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The AEM High Flow In-Tank Fuel Pump flows 320 lph (84 gph) at 43 PSI and is capable of supporting over 1,000 horsepower at 43 PSI. Inlet Fitting: 7.7mm ID, 11.0mm OD. Offset Inline, Outlet Fitting: 8 mm hose clamp. Offset

  • Color: Black
  • Brand: AEM
  • ASIN: B00A0J00UQ
  • UPC: 608067875151

AEM (30-3306) V2 Water/Methanol Injection HD Controller Kit with Internal MAP Sensor

AEM (30-3306) V2 Water/Methanol Injection HD Controller Kit

AEM's Boost Dependent HD turbo Diesel Controller has an on-board MAP sensor (up to 40 PSI) with a molded-in nipple for a boost hose pickup. The controller design features large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness's positive-lock connector. The Boost Dependent controller housing includes a wiring legend on the back, easy to access integrated fuse and molded mounting tabs. AEM's engineers spent extensive time developing the controller's flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine's need for water/methanol injection, which further optimizes charge air cooling and EGT reduction on turbo Diesels. AEM's Water/Methanol Injection wiring harness for the Boost Dependent HD turbo Diesel controller is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the syste...

  • Brand: AEM
  • ASIN: B00GSIBDJK
  • UPC: 840879022709

AEM 30-2130-50 50 PSIA or 3.5 Bar MAP Sensor Kit

AEM 30-2130-50 50 PSIA or 3.5 Bar MAP

AEM offers several sensor and Plug & Pin connector kits for vehicles that require additional outputs and/or upgraded hardware over existing sensors. Available sensors include boost/backpressure sensors, exhaust gas temperature (EGT) sensors, nitrous oxide/brake pressure sensors, UEGO replacement sensors, inlet air temp sensors (IAT), K-Type sensors and more. All sensors come with a three- wire mating connector with 12" leads for ease of installation.

  • Color: Silver
  • Brand: AEM
  • ASIN: B000CFUN3C
  • UPC: 840879012434

AEM 3 Gauges Combo Set UEGO WideBand A/F Ratio (30-4110) + Oil Pressure (30-4401) + Turbo Boost (30-4406)

AEM 3 Gauges Combo Set UEGO WideBand A/F

AEM’s legendary Digital Wideband O2 AFR UEGO Gauge is a wideband UEGO air/fuel ratio controller (AFR) and gauge in one. It unites accuracy, speed and control with an easy to read, digital LED display and sweeping LED “needle” that changes colors as AFR changes from rich to lean.Bosch 4.9 LSU wideband sensor and weld-in bung included (PN 30-4110)No free air sensor calibration required - everInterchangeable black and silver bezels includedInterchangeable black and white faceplates included52mm (2-1/16”) gauge housing0-5v analog output (10-20 AFR range only)AEM's Digital Boost Display Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays boost in 1 PSI increments, and a sweeping LED "needle" that lines the edge and moves as boost from 0 to up to 35 PSI. The boost gauge's digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.AEM Digital Oil Pressure Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays oil pressure in 1 PSI increments, and a sweeping LED "needle" that lines the edge and moves as oil pressure changes from 0 to 150. The oil pressure gauge's digital readout will automatically incre...

  • Color: Black
  • Brand: AEM
  • ASIN: B00Q3A2LDK

AEM 21-715C Cold Air Intake System Charcoal

AEM 21-715C Cold Air Intake System

AEM Cold Air Intake Systems are designed to produce horsepower and torque gains. They replace the restrictive factory airbox and air filter to give you better performance and better engine sound. AEM cold air intakes relocate the air filter outside the engine compartment so cooler air can be fed into your engine. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber for more horsepower and torque. AEM Cold Air Intakes include an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration, and performance while allowing easy oil-free cleaning. They include a mandrel-bent aluminum intake tube and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. This Air Intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

  • Color: Charcoal
  • Brand: AEM
  • ASIN: B00BF2U0D4
  • UPC: 024844327017

AEM 30-4350 Tru-Boost Controller Gauge

AEM 30-4350 Tru-Boost Controller

AEM’s TRU-BOOST Gauge-Type Controller is an electronic boost controller that combines the simplicity of a manual boost controller with the added ease of adjusting boost levels through a gauge interface. There is no external interface required for set up, and it is fully functional right out of the box. There are no gimmicks or special software programs included. If you want more boost press the button on the right of the gauge face, and if you want less boost press the button on the left of the gauge face. It’s that simple, and IT WORKS! AEM’s TRU-BOOST Gauge-Type Controller includes everything you need, including an on-board 29 psig pressure sensor, built-in Overboost protection with two timed shutdown levels, a scramble boost setting and a low-side output for a warning light. AEM offers a 75 psia boost sensor for high boost applications (sold separately). AEM’s boost control solenoid (included) is the only one specifically manufactured for automotive boost applications, which means it won’t corrode and stick from exposure to rich fuel mixtures, it is pressure tested to 100 psi and includes -4 AN fittings to eliminate any chance of leaks.

  • Color: Regular
  • Brand: AEM
  • ASIN: B001DX9KDG
  • UPC: 746821382658

AEM 21-740C Cold Air Intake System

AEM 21-740C Cold Air Intake

The AEM 21-740C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford Mustang Turbo models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 ...

  • Brand: AEM
  • ASIN: B00VBPPFYE
  • UPC: 024844357755

AEM 52mm Digital 2 Gauge Kit Oil Pressure 150psi & Turbo Boost -30-50 psi

AEM 52mm Digital 2 Gauge Kit Oil Pressure

AEM's digital boost gauges include a 0-5v analog output for use with data loggers and virtually any engine management system, such as the Infinity ECU, Series 2 EMS or AQ-1 Data Logger, making it the perfect solution for users who need to monitor and data log boost at high RPM on tuned engines. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge.Features Easy-to-install Plug & Play harness and sensor included Reads -30 to 50 PSI 24 green LED display lights Auto-dimming gauge face and read out lighting Three digit readout in center Standard 52mm Gauge Housing 0-5V analog output Interchangeable black and silver bezels included Interchangeable black and white faceplates includedAEM Digital Oil Pressure Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays oil pressure in 1 PSI increments, and a sweeping LED "needle" that lines the edge and moves as oil pressure changes from 0 to 150. The oil pressure gauge's digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.Features Ideal for carbureted or EFI vehicles Easy-to-install Plug & Play harness and sensor included 24 green LED display l...

  • Brand: AEM Electronics
  • ASIN: B073RSVX66
  • UPC: 688943502753

AEM 30-4900 Wideband Failsafe Gauge

AEM 30-4900 Wideband Failsafe

The Wideband Failsafe Gauge provides the ability to accurately tune AFR, while actively protecting your engine by constantly monitoring AFR curves and activating a user-defined Failsafe strategy if it runs lean. The Wideband Failsafe Gauge is a Universal Exhaust Gas Oxygen (UEGO—“you-way-go”) controller with an internal boost sensor, an internal data logger and a full color Organic Light Emitting Diode (OLED) display. It includes technology to activate a Failsafe strategy in the event AFR falls outside of a user-defined operating window. If the AFR falls outside of the set operating window, the Wideband Failsafe Gauge triggers a user defined output function that can save an engine from catastrophic damage. This product is a must have for all tuned performance engines, either forced induction or naturally aspirated, fuel injected or carbureted. Any high performance vehicle owners who want a highly accurate AFR tuning tool with logging and a protection strategy that can save an engine from catastrophic failure will want this Failsafe device. After the engine is tuned and a safe operating window of AFR is established, the Wideband Failsafe Gauge continually monitors AFR and boost or vacuum to make sure that AFR does not fall out of the defined operating window at a given boost...

  • Brand: AEM
  • ASIN: B007ZAQLF6
  • UPC: 737117316082
Similar Aem Turbo Kits Results
Aem Turbo Kits Video Results
           

Tomei M7960 turbo and AEM W/M kit install

Aem Turbo Kits

Took 1 business day to install the bigger turbo/AEM water meth kit/few others on BK1 2.0T model. Once again M7960 turbo is the great match up for BK1/BK2 2.0T model for street to Semi-race use from our experience.

Tags: hyundai,genesis,gencoupe,sfr,sfrusa,sfr_usa,you...

TURBO INSTALL PART 1 - MegaSquirt ECU & Other Electronics

Aem Turbo Kits

Today we install the MegaSquirt ECU into the Miata and all the gauges like the boost gauge and AFM! We also have to tune the car BE MY FRIEND!!!! Subscribe here! ►► https://tr.im/6I6jK Gamertag ► TheGingium Snapchat ► gingacaleb Follow me on Twitter ► https://tr.im/uNUPB Follow me on Instagram ...

Tags: Gingium,Racing,Car,MegaSquirt,MS2 PNP,ECu,tunab...

AEM Water/Methanol Install Turbo Foxbody Mustang

Aem Turbo Kits

In this video i'm installing a Water/Methanol kit by AEM on the turbo 351. Made a big decision to keep with pump 93 in the car instead of e85. So in order to make more power a Water/Methanol kit was needed. This isn't a complete install as the charge pipe is in yet, but I will link a video when...

Tags: justin91lx,AEM,snow performance,turbo,E85,water...