RC Helicopter Training Kit Gear for Trex 450 500 Blade 400 450 Esky SYMA JTS Align

RC Helicopter Training Kit Gear for Trex 450

Remote Control Helicopter Training Kit is a MUST have for anyone who is new to flying those advanced helicopters. It helps balance your helicopter and it great reduces the chance of breaking the rotor blade or any expensive parts from hitting any obstacle!

  • ASIN: B00YZ9XVLW
  • UPC: 638936426689

GARTT 3700KV 330W Brushless Motor for 450 Align Trex RC Helicopter

GARTT 3700KV 330W Brushless Motor for 450 Align

Specification, Kv: 3700KV Max current: 32Amps Max Power: 330watts Idle current: 3.6Amps Resistance: 0.0185Ω Shaft: 3.175mm Weight: 75g Suggested ESC: 40A Cell count: 2-4s Lipoly (Voltage) Bolt holes spacing: 16mm Bolt thread: M2.5/M3 Connection: Bullet-connector When using the screws we provide, pay attention to the thickness of the motor mounting plate. If the mounting plate is too thin, it may cause the screws to be too long to be pushed up to the motor coil.

  • Brand: GARTT
  • ASIN: B06X185WTN

GarttGARTT 450L Tail Blade Fits Align Trex 450L RC Helicopter

GarttGARTT 450L Tail Blade Fits Align Trex 450L

Use: Vehicles & Remote Control Toys For Vehicle Type: Helicopters Brand Name: GARTT Model Number: 450L

  • Brand: GARTT
  • ASIN: B00P915OTM

GARTT DIY GT500 FBL TT 2.4GHz 6Ch Flybaless Torque Tube RC Helicopter fits Align Trex 500 Helicopter KIT Version

GARTT DIY GT500 FBL TT 2.4GHz 6Ch Flybaless

Attention:It is KIT vesion,not including any electronic part.Don't suggest the people who are useless at DIY to buy this product. Features High quality flybarless rotor head. Black anodized CNC alloy head & tail unit. Beautifully finished carbon fiber main frames. High quality tail bearings and tight tolerances to ensure no slop in the tail assembly. Excellent power-to-weight ratio. Compatible with T-Rex 500 helicopter. 90% pre-assembled. Specication Length: 840mm Height: 310mm Main rotor diameter: 970mm Tail rotor diameter: 200mm Motor pinion gear: 13T Main drive gear: 162T Tail drive gear: 31T Drive gear ratio: 1:12.46:4.68 Weight(without power system): 1370g Flying weight: Approx 1700g Required items 6CH Transmitter/Receiver with Helicopter Programming Lipoly Battery (2200~3300mAh 6S) Servos (3 x cyclic, 1 x tail) Flybarless Control Unit Brushless Out runner Motor 60~80A ESC Package includes GT00-FBL TT Torque-Tube Helicopter Kit Plastic canopy Glass fiber main Blades Tail Blades Other Necessary Hardware

  • Brand: GARTT
  • ASIN: B00GM8BNBO
  • UPC: 521147214391

GARTT GarttGT450 DFC main rotor head assembly fits Align Trex 450 helicopter

GARTT GarttGT450 DFC main rotor head assembly fits

Use: Vehicles & Remote Control Toys For Vehicle Type: Helicopters Brand Name: GARTT Material: Metal Model Number: 450

  • Brand: GARTT
  • ASIN: B00KLYZHTY
  • UPC: 521147212458

shengerm Training Gear Sponge Ball Kit for RC Walkera Trex Align 400 450 Helicopter Wholesale

shengerm Training Gear Sponge Ball Kit for RC

   Features:100% Brand New This training kit is great for beginners or experts who are trying out new helicopters or new set-ups. It helps balances helicopter and it greatly prevents blades or other expensive parts from tilting and hitting the ground or any obstacles, thus saving costly damage. By using the training kit, beginner learn how to safely land RC helicopter with ease. Can be used for 400/450 Helicopter like walkera 36# 60# 68# Align 450SE Specification:Length:33cm  Ball diameter:40mm  Net weight:91gWeight:101g  Packet content:4 X training gear bars with balls installed at the end and held up by the fuel tubing 4 X skid clippers 1 X Center Hub    

  • Color: Blue
  • Brand: shengerm
  • ASIN: B07S1W42L3

GARTT HF 450L 1800KV Brushless Motor 4S-6S for Align Trex 450 450L PRO RC Helicopter

GARTT HF 450L 1800KV Brushless Motor 4S-6S for

Specifications: Motor KV: 1800KV RPM/V Motor Resistance (RM): 0.0648 Ω Idle Current (Io/10V): 1.3A/10V Max Continuous Current: 28A Max Continuous Power: 600W Weight: ≈90g/3.17oz Configu-ration: 9N6P Lipo Cell: 4S_6S Motor Diameter: 30.2mm/1.19in Motor Body Length: 35mm/1.38in Overall Shaft Length: 51mm/2.01in Shaft Diameter: 3.17mm/0.12in Bolt holes spacing: 16mm/0.63in Bolt thread: M2.5×6/M3×6 Motor Timing: 5deg Drive Frequency: 8kHz When using the screws we provide, pay attention to the thickness of the motor mounting plate. If the mounting plate is too thin, it may cause the screws to be too long to be pushed up to the motor coil.

  • Brand: GARTT
  • ASIN: B06WP4HYBK

GARTT 1220KV 2100W Brushless Motor for 550 / 600 Align Trex RC Helicopter

GARTT 1220KV 2100W Brushless Motor for 550 /

Specification, Kv:1220KV Max current:95Amps Max Power:2100watts Idle current:4.0Amps Resistance: 0.015Ω Shaft:6mm Weight:380g Suggested ESC:100A Cell count: 3-6s Lipoly (Voltage) Bolt holes spacing:25/30mm & mm Bolt thread: M3 Connection: 4.0mm Bullet-connector When using the screws we provide, pay attention to the thickness of the motor mounting plate. If the mounting plate is too thin, it may cause the screws to be too long to be pushed up to the motor coil.

  • Brand: GARTT
  • ASIN: B06WLK8ZCN

Foreverharbor ALZRC 325mm Carbon Fiber Main Blades Propeller Props for Devil 450 Pro/Sport/Rigid/Fast Align Helicopter RC Drone Aircraft

Foreverharbor ALZRC 325mm Carbon Fiber Main Blades Propeller

Features:1.Compatible Devil 450 Pro / Devil 450 Sport / Devil 450 RIGID / Devil 450 FAST.2.Durable, a must for beginners and junior users.3.Good quality and excellent performance.2.Very easy to install and remove off.5.Use 3K carbon fiber material, and unique forming technique, improve anti-twist, suitable for extreme 3D flight.Description:1.These propellers are designed for Devil 450 Pro / Devil 450 Sport / Devil 450 RIGID / Devil 450 FAST.2.It is good quality and strong in performance.3.Just come and get it!SpecificationsBrand:: ALZRCName: 325mm Carbon Fiber Main Blades Size: 325mm x 32mm Shaft Hole Diameter: 3mm Weight: Appro 27g/pcs Package information:Package size:340x50x13mm/13.6x2x0.52inPackage weight:58g/2.03ozGift box packagePackage Included:2 x Blades

  • Color: white& black
  • Brand: Foreverharbor
  • ASIN: B07R76X8DV

GARTT GarttHF450L-1800KV Brushless Motor for 450L Align Trex RC Helicopter

GARTT GarttHF450L-1800KV Brushless Motor for 450L Align Trex

Specifications: Motor KV: 1800KV RPM/V Motor Resistance (RM): 0.0648 Ω Idle Current (Io/10V): 1.3A/10V Max Continuous Current: 28A Max Continuous Power: 600W Weight: ≈90g/3.17oz Configu-ration: 9N6P Lipo Cell: 4S_6S Motor Diameter: 30.2mm/1.19in Motor Body Length: 35mm/1.38in Overall Shaft Length: 51mm/2.01in Shaft Diameter: 3.17mm/0.12in Bolt holes spacing: 16mm/0.63in Bolt thread: M2.5×6/M3×6 Motor Timing: 5deg Drive Frequency: 8kHz When using the screws we provide, pay attention to the thickness of the motor mounting plate. If the mounting plate is too thin, it may cause the screws to be too long to be pushed up to the motor coil.

  • Brand: GARTT
  • ASIN: B00OPYIIA6

GT500 430mm Fiber Glass Main Blades for 500 Align Trex RC Helicopter

GT500 430mm Fiber Glass Main Blades for 500

Use:Vehicles & Remote Control Toys Brand Name:GARTT Material:Glass RC Parts & Accs:Landing Gear Upgrade Parts/Accessories:Glass Fiber Main Blades Remote Control Peripherals/Devices:430mm Glass Fiber Main Blades Four-wheel Drive Attributes:Assemblage Tool Supplies:Cutting For Vehicle Type:Helicopters Model Number:GT500 Technical parameters:Value 2

  • Brand: GARTT
  • ASIN: B07KPDTG4X
  • UPC: 727523042927

Align/T-Rex Helicopters 150MT Tail Motor Assembly

Align/T-Rex Helicopters 150MT Tail Motor

With its technology expertise, proven product quality, attractive designs and superior post-sale support, ALIGN entered the Taiwanese domestic in 1995 as "ALIGN Appliances" As its products gain praises from the customers, ALIGN continued to secure OEM and joint-venture projects with numerous well know brand names, enabling the name "ALIGN Appliances" to establish itself as a major player in the domestic market. By 2003, Align has broadened its product line from appliances, telecommunications and information technology to radio control hobby products. "Align RC World" was the result of Aligns shift into family recreational concepts, with products such as high performance radio controlled model kits, related electronics and high efficiency model power system.

  • Brand: Align/T-Rex Helicopters
  • ASIN: B00HNMSL1S

HRB 5000mAh 50C 6S 22.2v RC Lipo Battery XT90 Plug for DJI Align T-REX550/600 Airplane RC Quadcopter Airplane Helicopter Car Truck

HRB 5000mAh 50C 6S 22.2v RC Lipo Battery

Description Capacity:5000mAh Continuous discharge rate: 50C Burst Rate :100C Voltage: 22.2V Cells : 6S Balance Plug:JST-XH Size: 6.1×1.89×1.81in/155 mm×48mm×46mm (0 - 3mm difference) Weight:26.56oz/753± 2g Packing Contents 100% Brand New 1x22.2V 5000mah 50c battery Overview HRB is the world first battery brand who only focus on supplying power for drones, UAV, UAS and FPV products. Dedicating to providing better flight experience.HRB has been continuously putting great efforts in technology research & development and now has become the most famous and professional UAV battery brand over the world. Attention 1.For the RC battery, only if the voltage and the plug match, then it will fit. 2.Check carefully the battery condition before using or charging.3.If the new battey won't hold a full charge or loss the charge very quickly in short time, please use Balance Charger to charge and recycle several times first. Fits These RC Models★Align T-REX 550 RC Helicopter (RH55E09XT)★ Align T-REX 700E F3C Helicopter (RH70E7XT)★ Align T-REX 700L RC Helicopter (RH70E11XT)★ Align T-REX 800E RC Helicopter (RH80E06XT)★ E-flite Beast 60e (EFL9000)★ E-flite CZ P2 Prometheus★ E-flite Carbon-Z Cub (EFL10450)/(EFL10475)★ E-flite Carbon-Z T-28 with AS3X (EFL1350)/(EFL1375)★ E-flit...

  • Brand: HRB
  • ASIN: B0719DNTM4
  • UPC: 714744067334

HRB 6S 6000mAh 22.2V Lipo Battery 50C-100C XT90 Plug for RC DJI Airplane Quadcopter Helicopter Align 7.2 700L Yak 54 T-REX

HRB 6S 6000mAh 22.2V Lipo Battery 50C-100C XT90

Descriptions Battery Type: LiPo Battery Volts: 22.2v Capacity: 6000mAh Cell Configuration: 6S1P Continuous Discharge: 50C Max Burst Rate: 100C Max Volts per Cell: 4.2V Max Volts per Pack: 25.2V Charge Rate: 1C Max Approved Charge Rate: 5C Wire Gauge: 10 AWG Soft and Flexible Low Resistance Silicone Wire Dimensions: 6.10 x 1.89 x 2.17 in /155 x 48 x 55 mm(0 - 3mm difference) Weight: 30.44oz (863g ± 2g) Package Including 100% Brand New 1 x 22.2V 6000mAh 50COverview HRB is the world first battery brand who only focus on supplying power for drones, UAV, UAS and FPV products. Dedicating to providing better flight experience.HRB has been continuously putting great efforts in technology research & development and now has become the most famous and professional UAV battery brand over the world. Features: 1.Superior Japan and Korea Lithium Polymer raw materials. 2.Automatic stacking technology, better performance 3.Strict matching progress, excellent consistency 4.Up to 200Wh/kg energy density 5.Long cycle life (150 times minimum) 6.1 years warranty Attention 1.For the RC battery, only if the voltage and the plug match, then it will fit. 2.Don't over charge more than 4.2V and dont over discharge below 3.7V. 3.Don't put it beside the high temperature condition. 4.Don't throw it into f...

  • Brand: HRB
  • ASIN: B07F8HCYHL
  • UPC: 765470653636

Youme 22.2V 6S RC LiPo Battery 6000mAh 50C-100C EC5 Connector for RC DJI E-Flite Airplane Quadcopter Helicopter Align 7.2 700L Yak 54 T-REX(6.10 x 1.9 x 2.20 in,1.9lb )

Youme 22.2V 6S RC LiPo Battery 6000mAh 50C-100C

6s 6000mah lipo battery Specification Brand: Youme Material:Li-Polymer Cells:6S Voltage:22.2v Capacity:6000mAh Discharge Rate: 50C-100C Charge Plug:JST-XH Plug Discharge Plug:EC5 Suggest charge rate:1C Silicone wire:Soft and Flexible Low Resistance Silicone Wire Dimension: 6.10 x 1.9 x 2.20 in/155 x 48 x 56 mm (0 - 3mm difference) Weight : 1.9lb/30.45 oz/863.3g±2g Certificate:CE,ROHS,MSDS,UN38.3 22.2v lipo battery Package Included ●1 packs x Youme 22.2V 6000mAh 50C 6S Lipo Battery with EC5 Plug The new batch with EC5 plug,If you get the battery with XT60 plug and not fit for your rc Models,please contact with me at first.Thanks ec5 lipo battery Fits These RC Models ★Compass ATOM 550 Ultimate★Align T-REX 550/ 700E F3C/ 700L/ 800E RC Helicopter ★Mikado LOGO 550 SE V2/ 550 SX V2 ★E-flite Beast 60e/ CZ P2 Prometheus/ Carbon-Z Cub/Carbon-Z T-28 with AS3X /Habu 32x DF ★Arrma talion 6s/Arrma talion/Arrma Typhon & Talion ★Compass ATOM 550 Ultimate ★Flitework Red Bull Pilatus PC-6 Turbo Porter 86.6" ★Tarot T960 hexacopter★Freewing Me-262 ★Avanti S ★p2 prometheus biplane ★large EDFs ★EDF jets ★110mm EDF ★700 12S heli★700 class helicopters ★42 inch catamaran ★(Only if the voltage, dimension and the plug match, then it will fit) Useful Knowledge: The...

  • Brand: Youme Power
  • ASIN: B0757X1TGQ
  • UPC: 765470654138

GARTT HF500 New Upgrade 1600KV 1700W Brushless Motor 3S-6S for 500 Align Trex RC Helicopter

GARTT HF500 New Upgrade 1600KV 1700W Brushless Motor

New Upgrade 1600KV 1700W Brushless Motor for 500 Align Trex RC Helicopter Specification, Kv: 1600KV Max current: 80 Amps Max Power: 1700watts Idle current: 3.2Amp Resistance: 0.0183Ω Shaft: 5.0mm Weight: ≈ 230gram Suggested ESC: 80A Cell count: 3--6s Lipoly (Voltage) Bolt holes spacing: M3× 25 mm & mm Bolt thread: M3×8 M Connection: 4.0 Bullet-connector Prop test data: Different test results from different size prop and different size battery When using the screws we provide, pay attention to the thickness of the motor mounting plate. If the mounting plate is too thin, it may cause the screws to be too long to be pushed up to the motor coil.

  • Brand: GARTT
  • ASIN: B06W9HHGJ7

HRB 2pcs 6S 5000mAh 22.2v 50C-100C with EC5 Plug RC Lipo Battery for RC Quadcopter Airplane Helicopter Car Truck 500 600 Helicopter(6.1×1.89×1.81inch)

HRB 2pcs 6S 5000mAh 22.2v 50C-100C with EC5

Description Capacity:5000mAh Continuous discharge rate: 50C Burst Rate :100C Voltage: 22.2V Cells : 6S Balance Plug:JST-XH Dimension: 6.1×1.89×1.81in/155 mm×48mm×46mm (0 - 3mm difference) Weight:26.56oz/753± 2g Packing Contents 100% Brand New 2x22.2V 5000mah 50c battery Overview HRB is the world first battery brand who only focus on supplying power for drones, UAV, UAS and FPV products. Dedicating to providing better flight experience.HRB has been continuously putting great efforts in technology research & development and now has become the most famous and professional UAV battery brand over the world. Features: 1.Superior Japan and Korea Lithium Polymer raw materials. 2.Automatic stacking technology, better performance 3.1 years warranty4.Don't over charge more than 4.2V and dont over discharge below 3.7V. 5.Check carefully the battery condition before using or charging. 6.If the new battey won't hold a full charge or loss the charge very quickly in short time, please use Balance Charger to charge and recycle several times first. Fits These RC Models★ Align T-REX 550 RC Helicopter (RH55E09XT) ★Align T-REX 700E F3C Helicopter (RH70E7XT) ★Align T-REX 700L RC Helicopter (RH70E11XT) ★Align T-REX 800E RC Helicopter (RH80E06XT)★ E-flite Beast 60e (EFL9000)★ E-flite CZ...

  • Brand: HRB
  • ASIN: B06XX64YRM
  • UPC: 714744064104

GARTT Gt450l DFC TT Torque Tube Helicopter with (Glass Carbon Fiber Canopy &Fiber Glass Main Blade) Fits Align Trex 450L Helicopter

GARTT Gt450l DFC TT Torque Tube Helicopter with

Attention:The color will be different from the picture according to the product date,don't order if you consider the color itself.Thanks. Specifications: Length:703mm Height:204mm Main Rotor Diameter :710mm Tail Rotor Diameter:325mm Motor Driver Gear:11T Main Driver Gear:121T Tail Driver Gear:25T Driver Gear Ratio:1:10.08:4.24 Package include: 1 X GT450L DFC TT Version RC Helicopter Kit(Glass Carbon Fiber Canopy &Fiber Glass Main Blade)

  • Brand: GARTT
  • ASIN: B00MCI53RI

GarttGARTT GT450L Main Shaft Cover Fits Align Trex 450L RC Helicopter

GarttGARTT GT450L Main Shaft Cover Fits Align Trex

Use: Vehicles & Remote Control Toys For Vehicle Type: Helicopters Brand Name: GARTT Model Number: 450L

  • Brand: GARTT
  • ASIN: B00P27M7BQ

GarttGARTT GT450 Flybarless Rotor Head Assembly (Belt Version) fits Align Trex 450 Helicopter

GarttGARTT GT450 Flybarless Rotor Head Assembly (Belt Version)

Use: Vehicles & Remote Control Toys For Vehicle Type: Helicopters Brand Name: GARTT Material: Metal Model Number: 450

  • Brand: GARTT
  • ASIN: B00GG9KHMA
  • UPC: 521147214155
Similar Align Rc Helicopters Results
Align Rc Helicopters Video Results
           

Turbine RC Helicopter - Align T-Rex 700

Align Rc Helicopters

This video will demonstrate the gas turbine Wren 44 powered Align T-Rex 700 helicopter RC helicopter. Filmed at the Whittlesea Model Aviation Group under the guidance of the AMAS. Big thank you to Ivor Miller from https://www.youtube.com/user/rcglo1/about for assisting me to produce this video.

Tags: Wren 44,Turbine,RC Helicopter,Turbine Helicopte...

ALIGN helicopters factory

Align Rc Helicopters

Tags: ALIGN,helicopter,rc,fly,airplane,savox,esc,lipo...

Align T-Rex 450LP (A)RTF Helicopter | Unboxing & Quick Assembly!

Align Rc Helicopters

We unbox the latest Align T-Rex 450 (A)RTF helicopter! For more information, check the link here: https://www.amainhobbies.com/align-trex-450lp-dominator-rtf-electric-helicopter-agnrh45e32x/p735116 Metric Hex Wrenches: https://www.amainhobbies.com/protek-rc-trutorque-metric-hex-driver-set-4-ptk...

Tags: AMain,Hobbies,amainhobbies,amain.com,amainhobbi...