B&K Precision 307A Analog Megohmmeter Insulation and Continuity Tester, 250/500/1000V Test Voltages, 400 Megohms Insulation Resistance, 500 Ohms Low-Resistance, 600V Voltage Detection

B&K Precision 307A Analog Megohmmeter Insulation and Continuity

The B&K Precision 307A analog megohmmeter is an insulation tester with three test voltages—250, 500, and 1,000V—for measuring insulation resistance to 400MΩ to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures low-resistance to 500Ω and AC voltage to 600V, lighting a warning indicator when a live circuit is detected. When a resistance measurement is complete and the test button is released, residual voltage is automatically discharged from the circuit under test. The test button can be locked for extended measurement sessions. Overload protection helps prevent damage to the meter. The meter is built into a carrying case and has a taut band movement for prompt, accurate readings. It is rated for category (CAT) III installations to 600V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. The unit has a low-battery indicator that signals when the batteries need to be replaced. It comes with eight 1.5V AA batteries, a set of test leads, a 0.5A, 250V fuse, and instructions. Megohmmeters are commonly used for electrical maintenance and testing in industries s...

  • Brand: B&K Precision
  • ASIN: B005FSX3A6
  • UPC: 817050030716

Akozon Earth Resistance Tester PM5203 Digital Insulation Resistance Tester Megohmmeter AC DC Voltage Tester Analog Display 50-1000V Meter Automatic Calculation

Akozon Earth Resistance Tester PM5203 Digital Insulation Resistance

Specification: Technical Parameter Insulation Test: Output Voltage:50V(0 %~+20%) ,Measuring Range:0.01MΩ~50MΩ ±(3%+5) Output Voltage:100V (0%~+20%),Measuring Range:0.01MΩ~100MΩ ±(3%+5) Output Voltage:250V (0%~+20%),Measuring Range:0.01MΩ~250ΩM ±(3%+5) Output Voltage:500V (0%~+20%),Measuring Range:0.01MΩ~500MΩ ±(3%+5), 1.00GΩ~5.00GΩ±(5%+0.1GΩ) Output Voltage:1000V (0%~+20%) ,Measuring Range:5.00GΩ~10.00GΩ±(10%+0.2GΩ) Multimeter Functions DC Voltage Test :Measuring Range:0.1~1000V±0.5% AC Voltage Test:Measuring Range:0.1~50V±1% Continuity Test:Measuring Range:0.01Ω~200Ω±0.5% Short Circuit Current:1.8mA Characteristics Auto Calculate PI and DAR Data Storage/Loading Data Comparision Auto Discharge for Capacitive Load Timer Function for Insulation Test Lock Function For Insulation Test Low Battery Indication DC/AC Voltage Test Continuity Test Auto Power Off Digital and Analog Display General Parameter Brand :PEAKMETER Model :PM5203 Power Supply :6 x 1.5V AA Batteries (NOT included) Item Size :19*15*7cm / 7.48*5.91*2.76in Weight Approx.:1977g Safety Rating :CE CAT.III 1000V CAT IV 600V RoHS Package Includes: 1 x PM5203 Digital Insulation Tester 1 x User Manual 2 x Alligator Clips 2 x Test Leads 1 x Hand Bag 1 x Sling

  • Color: Black
  • Brand: Akozon
  • ASIN: B07Q9939V9
  • UPC: 654936634251

AEMC 1015 Analog Megohmmeter, 1000 Ohms Resistance, 500V, 1000V Test Voltage, 200mA Current

AEMC 1015 Analog Megohmmeter, 1000 Ohms Resistance, 500V,

The True Megohmmeter Model 1015 is a compact, self-contained, batteryoperated megohmmeter. This practical, dependable and rugged tester can be used for a broad range of plant and field service applications; it is designed for use in harsh environments such as mining, industrial, offshore and commercial electrical. The AC voltage scale is linear with a range of 0 to 600VAC (white background). The colored battery scale displays in green for a good battery and in red for a battery in need of replacement. A built-in battery tester is provided by simply pressing the yellow push button when the selector switch is in the OFF position. A voltmeter (safety check) with a range of 0 to 600VAC is standard. Test voltage combinations 500V and 1000V. Insulation measurements to 1000MOhm, push button for battery check. Resistance range to 1000Ohm. 0 to 10Ohm+ and 0 to 10Ohm- continuity ranges. Continuity measurements with 200mA test current. Compact and lightweight, large, direct-reading, colored scale 600V test voltage range (safety check). Supplied with a yellow, non-slip, shockproof rubber housing and soft carrying case. Designed to international and safety standards. CE mark. Applications: acceptance testing and preventive maintenance, motors (AC and DC), transformers, cables, heaters, relays...

  • Brand: AEMC
  • ASIN: B008S0ALHG
  • UPC: 685338150049

MeterTo Low Power Pointer Ground Resistance Tester Analog Earth Resistance Test Meter Megohmmeter Megometro 10ohm to 1000ohm

MeterTo Low Power Pointer Ground Resistance Tester Analog

MeterTo MeterTo mainly offers instruments and tools.  Please confirm the product is offered by our store MeterTo when purchasing, otherwise we can't ensure the quality and after-sale service. Features: Low power consumption Earth resistance value can be read directly from the scale The latest circuit design permits the instrument to operate with the minimum of influence from earth voltage and dearth resistance of auxiliary earth bars Simplified measurement can be easily made by pressing the "Simplified Meas." Switch button only Push switch buttons permit smooth operation of the instrument Specifications: Measuring ranges: Earth resistance 10/100/1000ohms; Earth voltage 30V AC (5K ohms/V approx.) Accuracy: Earth resistance Within ±5% of full scale; Earth voltage Within ±5% of full scale Measurement system: Earth resistance/By constant current inverter/800Hz approx,2mA/Earth voltage /By rectifier type/5K ohms/V approx, 40 to 500Hz Protection levels: EN 61010-1; CAT II Protection class: class III Withstand voltage: 1500V AC for one minute between electrical circuit and housing case Power supply: 8*1.5V AA battery or equivalent (not included in the package)  

  • Brand: MeterTo 
  • ASIN: B07GXCTZ7S
  • UPC: 680727646912

UEi Test Instruments IRT3 Analog Insulation Resistance Tester

UEi Test Instruments IRT3 Analog Insulation Resistance

The IRT3 is an Analog Insulation Resistance Tester with a large display that enables professionals to check motor and generator windings and many other applications. Tested to meet IEC1010, the IRT3 measures 0 to 600V AC and up to 400M? resistance.

  • Color: Yellow
  • Brand: UEi Test Instruments
  • ASIN: B0084H0HM2
  • UPC: 053533505153

BAFX Products - Decibel Meter/Sound Level Reader - W/Battery!

BAFX Products - Decibel Meter/Sound Level Reader -

The BAFX Products Decibel Meter, the quality and features you require at a fraction of the price!Our Decibel Meter is compact and easy to use while providing you accurate readings in a greater range than similar inexpensive sound meters on the market!Our sound meter can read between 30dBA~130dBa, while reducing the effects of wind noise to produce more accurate readings. The BAFX Products sound meter provides readings within +/-1.5dBA providing some of the most accurate results!Perfect for monitoring noise levels in factories, offices, theaters and audio systems.The meter will automatically power off after approximately 11 minutes of use and MAX Hold Function will hold the highest reading until a higher reading is picked up. Included with the Decibel Meter is ONE, 9V Battery to start you off which will provide you about 30 hours of use.Other great feature are: Sampling rate of 2X/second, Automatic back light display, Low battery indication, Frequency response range of 31.5Hz ~ 8.5KHzPLEASE keep in mind that this meter measures in dBA to account for the relative loudness perceived by the human ear. This is the most commonly used dB measuring frequency."A" weighted decibel measuring means that values of sounds at lower frequencies are reduced, for more information contact BAFX Prod...

  • Color: Dark Blue
  • Brand: BAFX Products
  • ASIN: B00ECCZWWI
  • UPC: 859261003370

Extech 380320 Analog Insulation Tester

Extech 380320 Analog Insulation

View larger Analog Meghommeter Megohmmeter with large easy-to-read analog display, CAT III-1000V safety rating, live circuit warning with three test voltages (250V, 500V, 1000V), as well as an insulation range to 400M ohms. Comes with test leads, six AA batteries, hard carrying case, and user manual. Additional Features Measures continuity (3 ohms), resistance (500 ohms) and AC Voltage (600V). Other functions include Lock Power On for extended test times, automatic discharge circuit, fuse protection, and 1.3mA short circuit current. Application and use of insulation testers: Insulation testers can be used to test motor, transformer windings, instruments, and appliances, check for moisture in wire and cable assemblies, safely evaluate a new wiring installation, and check for carbon tracking in breakers, relays, and switches. Extech Insulation Testers offer high sensitivity to assure reliable monitoring of low resistance motor windings. 380260View larger Handheld Megohmmeter The autoranging Extech 380260 digital insulation tester has a large, easily readable backlit LCD with dual display of insulation resistance and test voltage. It measures insulation resistance in three selectable voltages of 250, 500 and 1000V and Insulation Resistance to 2000MΩ. A Lock Power On functi...

  • Brand: Extech
  • ASIN: B0038KS2EK
  • UPC: 793950803202

AEMC 1015 Analog Megohmmeter, 1000 Ohms Resistance, 500V, 1000V Test Voltage, 200mA Current by AEMC

AEMC 1015 Analog Megohmmeter, 1000 Ohms Resistance, 500V,

True megohmmeter; test voltage selections of 500V or 1000V;Insulation measurements to 1000MOhm;Push button for battery check; continuity measurements with 200mA test current;Compact and lightweight; large, direct-reading, colored scale;600V test voltage range (safety check); supplied with a yellow, non-slip, shockproof rubber housing and soft carrying case

  • Brand: AEMC Instruments
  • ASIN: B01M0QPJPR

Fluke 1507 Digital Megohmmeter Insulation Resistance Tester

Fluke 1507 Digital Megohmmeter Insulation Resistance

Save both time and money with Automatic calculation of Polarization Index and Dielectric Absorption Ratio. -Make repetitive test simple and easy with the Compare (Pass/Fail) function. -Insulation Resistance Tester for Hybrid. Product Type: -Pipe. Generic Specifications: -Insulation test voltages: 50V, 100V, 250V, 500V and 1000V. Dimensions: Overall Height - Top to Bottom: -2.9 Inches. Overall Width - Side to Side: -5.9 Inches. Overall Depth - Front to Back: -11.75 Inches. Overall Product Weight: -3.2 Pounds.

  • Brand: Fluke
  • ASIN: B000X4O9WI
  • UPC: 095969288675

GorNorriss Electronics Gadgets BM500A Digital Insulation Resistance 1999M 1000V Tester Meter Megohmmeter

GorNorriss Electronics Gadgets BM500A Digital Insulation Resistance 1999M

 Feature:     100% Brand new and high quality     Quantity:1 Pc     Color: Black     Material: Plastic     Digital Insulation Resistance Tester     High-pressure warning light output     Maximum Display : 1999     Insulation resistance measurement voltage : 250V, 500V, 1000V     Insulation resistance measurement range : 0 ~ 2000Mω     Short circuit current: no less than 2mA     Test accuracy : ± 5% ± 5     Data hold function     Power supply : 6F22 , or 9V × 1     Resistance: 0~1999Mω ±(5%+5),0~1999Mω ±(5%+5)     Auto Range: yes     Data Hold:  yes     Load current;  2ma     Low Battery Warning:  yes     LCD MAX. Count:  1999     This product is very convenient and easy to usePackage Include:     1 x BM500A Insulation Resistance Tester (without retailed package)

  • Color: Black
  • Brand: GorNorriss Electronics Gadgets
  • ASIN: B07SBTF33R
  • UPC: 683661073868

Fieldpiece ST4 Dual Temperature Meter, -58 to 2000F(-50 to 1300C)

Fieldpiece ST4 Dual Temperature Meter, -58 to 2000F(-50

The Fieldpiece Dual-Temperature Meter, model ST4, measures two temperatures simultaneously using the included k-type, wrap tab beaded thermocouples. The technology inside the ST4 provides superior temperature compensation in rapidly changing environments commonly found while performing field service. Use the ST4 to find Delta T and just about any temperature split you want to measure. Displays T1, T2 and T1-T2 in big numbers on the LCD screen. Features two front face calibration pots and comes in our clear front case with magnetic hanger model ANC6. Use with our optional ATWB1 wet bulb thermocouple to help you find target superheat or with our pipe clamp T/Cs to check for blocked dryer filters.

  • Brand: Fieldpiece
  • ASIN: B000OLCD9Q
  • UPC: 787721619901

Signstek MESR-100 V2 Auto Ranging in Circuit ESR LCR meter Capacitor/Low Ohm Meter Up to 0.01 to 100R, Support in Circuit Testing

Signstek MESR-100 V2 Auto Ranging in Circuit ESR

Using 100kHz to remove the impedance 1/(2*pi*F*C), the impedance will become small, and then we can measure the true series resistor value. A bad E-capacitor have larger ESR and create large ripple rather than filtering noise. Normally, a big capacitor is larger than 3 ohm. Therefore, we can measure the capacitor is bad, damaged or in good condition by using this theory. Because our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test. Because this low testing voltage, it cannot turn on the semiconductor inside a circuit under testing. During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not. Advantage of V2: 1) Change square wave to sine wave 100 KHz, reduce square wave's high frequency component, and affect the reading passing the test leads and capacitor. 2)Higher Resolution up to 0.001 ohm. 3)128X64 dot matrix LCD, with larger value display and information 4)Embedded 25V capacitor table at LCD, auto display the capacitor is good or bad reference to common 25V electrolytic capacitor. 5)New plastic case, curve design for hand carrying. New stand for 60 degree stand on desk. 6)Use 2X AA battery, more convenience and longer battery life than 9V battery. 7)Support ext...

  • Brand: Signstek
  • ASIN: B00GYSFOM6
  • UPC: 710219731090

VICTOR VC60B+ Digital Insulation Resistance Tester Megohm Meter DC250/500/1000V AC750V Orange with Black

VICTOR VC60B+ Digital Insulation Resistance Tester Megohm Meter

Introduction:The whole instrument is stylish and superior grade in appearance and highly stable in performance. It can be operated by both hands through using a shoulder strap. It is most suitable for the needs of insulation resistance check, such as electric, cable, electrical and mechanical equipment, telecommunication equipment and electrical facilities.Specification:Model: VC60B+Measuring Voltage: 50V±10% 500V±10% 1000V±10%Insulation Range: 0.1MΩ~20 MΩ 0.1MΩ~50 MΩ 0.1MΩ~100 MΩ20MΩ~500 MΩ 50MΩ~1000 MΩ 100MΩ~2000 MΩAccuracy: ±(4%+2)Current of Short Circuit: 1.8mA 1.8mA 1.6mAMedian Resistance: 2MΩ 2MΩ 5MΩTerminal Position: L & EVoltage Test(AC750V) Accuracy: ±(1.0% of reading + 6 digits)Input Impendance: 1MΩFrequency Response: (50~200) HzTerminal Position: ACV & GAlarm Function Red indicator light is illuminatedLow Battery Indication: YesOver Load Indication: YesUnit Symbol Display: YesAuto Power Off: YesMax. Display: 1999Over Range Display: "1"Operating Temperature: 0℃~40℃Relative Humidity: 30%RH~85%RHDimension: 105×164×70mmWeight: 900gPower: 9V,6 x AA/1.5V battery (Not Included)Package Include:1 x Digital Insulation Tester1 x 10A Test Leads2 x Alligator Clip1 x Shoulder Strap1 x User Manual Note: The batteries are not included in the package due to A...

  • Brand: AIMOTEK
  • ASIN: B00O14LDKW
  • UPC: 705554036757

FLUKE-1587/I400 FC 2-in-1 Insulation Multimeter W/Clamp

FLUKE-1587/I400 FC 2-in-1 Insulation Multimeter

The Fluke i400 AC Current Clamp is a high-safety current clamp for digital multimeters. The current clamp provides accurate current measurements without breaking electric circuits, helping you take measurements safely with industry standard safety ratings.

  • Brand: Fluke
  • ASIN: B017OVC2HG
  • UPC: 095969797290

Analog Hand Cranked Megohmmeter; Insulation Resistance Range: 1 to 5000 megohm

Analog Hand Cranked Megohmmeter; Insulation Resistance Range: 1

Specification: Item: Hand Cranked MegohmmeterOutput Test Voltage: 250/500/1000VDCInsulation Resistance Range: 1 to 5000 megohmLive Circuit Detection: 0 to 600VAC/DCDisplay: AnalogAccuracy: 2% Full ScaleSafety Rating: CAT II 600V, CAT III 300VAuto Ranging: YesFeatures: Auto Discharge When FinishedPower Source: CrankIncludes: Set of (3) Color Coded Lead with Color Coded Alligator Clips, Black Test Probe, Soft Carrying CaseManufacturers Warranty Length: 1 yr."

  • ASIN: B07C5YWFBB

Insulation Tester 50/100/250/500/1000V, Megohmmeter and Multimeter: 50k to 2G Insulation Resistance, DC/AC TRMS Voltage and Current, Resistance, Capacitance, Frequency, Temperature

Insulation Tester 50/100/250/500/1000V, Megohmmeter and Multimeter: 50k to

The ennoLogic eM870M is a megohmmeter (insulation tester) and multimeter combined into one handheld instrument. An insulation tester is used to test the insulation of electrical systems. It applies a high voltage across the insulation and measures how much current is flowing. The better the insulation, the less current will flow, and the higher the insulation resistance will be. Insulation can deteriorate over time, which can lead to equipment breakdown. Periodic insulation tests performed as part of regular maintenance can prevent this. The eM870M lets you choose from five different test voltages in the range of 50V to 1000V. Use it to test insulation and troubleshoot motors, transformer windings, relays, switches, circuit breakers, electric installations, and appliances. Insulation testers are used to check for moisture buildup in cables and wiring which can lead to equipment failure. The product package includes one eM870M insulation multimeter, two pairs of test leads (one for attaching alligator clips), two alligator clips, one thermocouple probe, six AAA batteries, carrying case, and a detailed user manual (in English). Specifications -DC Voltage: 0.1mV~1000V, ± (0.1%+2digits) -AC Voltage: 0.1mV~1000V, ± (0.8%+4digits) -DC Current: 0.1uA~500mA, ± (0.2%+2digits) -AC C...

  • Brand: ennoLogic
  • ASIN: B07F1FFNKS

Digital Insulation Resistance Tester, BTMETER BT-6688B with Test Voltage 5000V, Insulation Resistance 200G ohms, High Voltage Indication

Digital Insulation Resistance Tester, BTMETER BT-6688B with Test

ABOUT US BTMETER - A professional Test & Measurement solution provider. We dedicated ourselves to test, measurement and monitoring instrument and software that are widely used in electric,HVAC, automotive,network troubleshooting, as well as in hobbist,electrical, industrial, medical, process and calibration applications. About BT-6688B Insulation Resistance Meters - Meter is rather heavy, as it should be. - All cable terminals located on back side. - Ranges 200 Gig ohm and 5k volt at low cost - Clear display, anti slippery housing great for outdoor testing. - Easy to use, very heavy duty high voltage cables included. - Display actual resistance reading instead of just LED light showing - Features with quakeproof, dust proof and damp proof tester, fit for outdoor working environment Specification:  AC Voltage: 750V Data Hold: Yes Weight: 900g Back Light Screen: Yes Low Battery Indication: Yes HV red Indication Lamp Light: Yes Insulation Resistance: 0.1M~200GΩ Testing Voltage: 500V/1000V/ 2500V/5000V

  • Color: Orange
  • Brand: BTMETER
  • ASIN: B07C2SSH51
  • UPC: 703546921777

Amprobe AMC-2 Hand Cranked Insulation Tester

Amprobe AMC-2 Hand Cranked Insulation

The Amprobe AMC-2 hand cranked insulation tester is an analog meter to measure insulation resistance on wires, cables, transformers, and electrical motors. The unit measures insulation resistance from 0 to 100 ohms using a 500V direct current (DC) test voltage. The test voltage is produced by a hand-cranked constant voltage generator, so the unit never needs batteries. A guard terminal prevents surface leakage from affecting the instrument's readings. The AMC-2 is designed for use by electricians and electrical contractors. Specifications Power supply Hand-cranked constant voltage generator Insulation resistance range 0 to 100 ohms DC test voltage 500V Weight (including batteries) 2.5 lb./1.13kg Dimensions 7 x 4 x 3.6 inches/177.8 x 101.6 x 92.1mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, or leads connect the meter to a circuit or device. Single-function meters, such as bat...

  • Brand: Amprobe
  • ASIN: B000MARP2E
  • UPC: 095969366168

Ohm Meter - Extra Mini Digital Multimeter Overload Protect Voltage Ampere Ohm Meter Dc Ac - Plug Analog Hioki Multimeter Alligator Fluke Arduino Master Vaping Clips Cars Case Leads Digital

Ohm Meter - Extra Mini Digital Multimeter Overload

【 Professional for Ohm Meter - Extra Mini Digital Multimeter Overload Protect Voltage Ampere Ohm Meter Dc Ac - Plug Analog Hioki Multimeter Alligator Fluke Arduino Master Vaping Clips Cars Case Leads Digital - Best Price Ohm meter】Product Specifications:Unit Type: Set Package Weight: 0.08kg (0.18lb.) Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in) It can benefit you in purchasing options, You Should to:Check the price tag on Ohm meter before obtain any store. You must to selected and acquired from reliable outletCheck features and other of Ohm Meter - Extra Mini Digital Multimeter Overload Protect Voltage Ampere Ohm Meter Dc Ac - Plug Analog Hioki Multimeter Alligator Fluke Arduino Master Vaping Clips Cars Case Leads Digital that suit in your case requireCheck some time for guaranty of Ohm meterThe key steps are check cost, condition of pre-order and value recommendation. The Ohm Meter - Extra Mini Digital Multimeter Overload Protect Voltage Ampere Ohm Meter Dc Ac - Plug Analog Hioki Multimeter Alligator Fluke Arduino Master Vaping Clips Cars Case Leads Digital are right and appropriate that you just demandLook in to the step of solutions to transportation and just how to disbursementLastly, I hope that this reviews concerning this product will be useful!.❤❤...

  • Brand: Unknown
  • ASIN: B07S356QT7

Fieldpiece SMG5 Standalone Digital Megohm Meter

Fieldpiece SMG5 Standalone Digital Megohm

The Fieldpiece digital Mega ohm meter, SMG5, is a compact standalone meter designed for checking HVAC compressor insulation. The SMG5 provides a 1000V voltage source, monitors current, and displays the resistance between the Test points. Maximum current output is < 1MA. It can be used to determine the condition of insulation from winding to ground in a motor, compressor, or transformer. Includes a case, alligator clip lead tip and leads with removable tips. made in United States. Manufactured by Fieldpiece instruments Inc.

  • Brand: Fieldpiece
  • ASIN: B000UV2L4W
  • UPC: 872641000448
Similar Analog Megohmmeter Results
Analog Megohmmeter Video Results
           

testing leads with a megger

Analog Megohmmeter

testing leads with a megger

Tags: easytest

How insulation resistance test practical with megger meter test in Urdu english

Analog Megohmmeter

How insulation resistance test practical with megger test meter in Urdu english In this video we can see you that how megger tester insulation resistance test, earth test with full practical and megger meter introduction in Urdu & English Cable insulation test with megger in Urdu you can learn ...

Tags: How insulation resistance test practical with m...

"Megger" insulation test on a bad motor

Analog Megohmmeter

Tags: instrumentation,motor,tester,Megger,insulation,...