Aprilaire 50 Sensing Relay, 24-Volt

Aprilaire 50 Sensing Relay,

Current sensing relay used to turn Aprilaire humidifiers on when indoor blower of air handler is energized. Makes installing any humidifier easier than ever before.

  • Brand: Aprilaire
  • ASIN: B002T0ZTNC
  • UPC: 885455813234

Aprilaire 51 120V Current Sensing Relay

Aprilaire 51 120V Current Sensing

About The Aprilaire 51 120V Current Sensing Relay The Aprilaire 51 120V Current Sensing Relay (minimum of 4 amps) has a voltage Range between 100125 VAC, 5060 Hz and simplifies the installation of your air cleaner on furnaces that do not have accessory terminals. The Aprilaire 51 120V Current Sensing Relay also works with Honeywell humidifier models HE220, HE225, HE260, HE265, HE360 amp; HE365.

  • Brand: Aprilaire
  • ASIN: B000I0T3MS
  • UPC: 885437183010

KKmoon 12V 0-10A DC Current Detection Module Current Sensing Detecting Delay Relay Control

KKmoon 12V 0-10A DC Current Detection Module Current

This module can detect DC current in the range of 0-10A, the accuracy is 0.01A. Features: Detecting range: DC 0~10A; accuracy: 0.01A(10mA). Detect the current to control the relay then control the circuit on/off. Set delay time to prevent output shock so as to protect the circuit. With error calibration function. Can turn off the LED display to reduce power consumption. Functions Description: P-1: Over-current Detection: when the detecting currentI2(high limit setting), the relay opens. P-2: Under-current Detection: when the detecting current>I2, the relay closes;

  • Brand: KKmoon
  • ASIN: B01N0OKHFX
  • UPC: 602105489621

Leviton OSA20-R00 15A INC 20A FL 120-277VAC 15A FL 347VAC, Add-A-Relay for Occupancy Sensor with HVAC Relay 0.5A 125VAC 1.0A 30VDC, Black

Leviton OSA20-R00 15A INC 20A FL 120-277VAC 15A

Containing both a 24VDC supply and a 20A line voltage relay for most models, the Leviton compact power pack provides low voltage power and line voltage control for Leviton Occupancy Sensors. Versions include Auto-ON and Manual-ON inputs for occupancy sensors, Hold-ON and Hold-OFF capabilities, and a local input for momentary or maintained dry contact switches. The OSP Power Pack Series is also used to supply power to the OSA Add-A-Relay model. The Power Pack conveniently mounts in a knockout hole of a standard junction box. The unit can be placed inside or outside the junction box with a simple twist-on nut. 15A incandescent @ 120V, 20A fluorescent @ 120V, 20A fluorescent @ 277V, 15A fluorescent @ 347V; HVAC: 0.5A @ 120VAC, 1A @ 30VDC.

  • Color: Black
  • Brand: Leviton
  • ASIN: B002KMBDJI
  • UPC: 078477166512

50 - Honeywell OEM Replacement Current Sensing Relay

50 - Honeywell OEM Replacement Current Sensing

  • ASIN: B00IK2PRYE

P110-0050 - Aprilaire OEM Replacement Current Sensing Relay

P110-0050 - Aprilaire OEM Replacement Current Sensing

  • Brand: Aprilaire
  • ASIN: B00IK2NSQI

AP-50 - Honeywell OEM Replacement Current Sensing Relay

AP-50 - Honeywell OEM Replacement Current Sensing

  • ASIN: B00IK2PR7Q

AP- P110-0050 - Honeywell OEM Replacement Current Sensing Relay

AP- P110-0050 - Honeywell OEM Replacement Current Sensing

  • ASIN: B00IK2NTQW

Johnson Controls CSD-CF0A0-1 Series CSD Digital Output Current Switch, Clamp/Split Core, Fixed Threshold, 0.15 amps

Johnson Controls CSD-CF0A0-1 Series CSD Digital Output Current

The Current Switch Device (CSD) Series of digital output current switches are non-intrusive devices designed to detect current flowing through a cable or wire. A cost-effective solution for monitoring on and off status or proof of operation, these units are ideal for monitoring very small current loads on motors driving fans and blowers, pumps, heating coils, and lighting. The CSD models with command relays not only monitor the current flowing through the cable but also facilitate the start and stopping of the motor. These units also provide a universal solid-state output and do not require a power supply. Completely self-powered, these units draw their power from current induced from the cable or line being monitored.

  • Brand: Johnson Controls
  • ASIN: B008FM2WEC

Emerson 90-290Q Fan Relay SPST

Emerson 90-290Q Fan Relay

Fan Relay, Type 84, 24 VAC Coil, SPNO, Coil Data: 90 Ohms DC Resistance, 125 mA (Nominal), 3 VA (Nominal), 4 VA (Inrush). Contact Rating: 125 / 250 VAC, Inductive: 8 Amps, Continuous, 25 Amps. Inrush, Resistive: 16 Amps Continuous.

  • Brand: White-Rodgers
  • ASIN: B00BTLN78Q
  • UPC: 786710027987

Aprilaire 51 Current Sensing Relay

Aprilaire 51 Current Sensing

The Aprilaire #51 current sensing relay simplifies air cleaner installation on furnaces without accessory terminals.

  • Brand: Aprilaire
  • ASIN: B000XM4BB4
  • UPC: 686720000515

GA50 24V Current Sensing Relay

GA50 24V Current Sensing

Replacement Current Sensing Relay 24V. This item senses current rather than measuring voltage, making it more reliable. It is less expensive than using traditional flow switches, pressure switches or other types of relays. The relay installs around the blower motors common lead and interface easily into the circuitry. Its case is constructed from high-impact plastic. The lead wire bracket is protected by a soft sponge insert, in order to prevent damage to the motor/blower wire and/or accidental contact with any metal. Designed to be wired in series with the 24 volt control circuit of a humidifier.

  • ASIN: B000UUU51Y
  • UPC: 683786070261

Aprilaire 500M Whole House Humidifier, Manual Compact Furnace Humidifier

Aprilaire 500M Whole House Humidifier, Manual Compact Furnace

Aprilaire introduced the first evaporative humidifier for forced air furnace systems back in 1954. Since that time, Aprilaire continues to lead the industry in whole home humidification systems. Our evaporative humidifiers work by piping water into the distribution tray located at the top of the humidifier. The water is uniformly distributed across the width of the tray and through a scientifically designed system of outlets. It flows by gravity over the water panel evaporator. Dry, hot air from the HVAC system is moved through the moisture-laden water panel evaporator. Natural evaporation takes place, the water is turned to vapor, and the humidified air is circulated throughout your home.

  • Color: White
  • Brand: Aprilaire
  • ASIN: B00R3GEJ6K
  • UPC: 686720504006

Dwyer Miniature Current Switch, MCS-111050, Solid Core, .5 to 50 A Continuous

Dwyer Miniature Current Switch, MCS-111050, Solid Core, .5

The Series MCS Miniature Current Switches are ideal for monitoring the current usage in fuse boxes and small control panels. Both models have adjustable set points and LED indication to show there is power to the unit and when the switch activates. Set points can be adjusted using the potentiometer next to the LEDs. Due to the size of the switch, it is only offered in solid core and no core versions. The no core version has terminal blocks which can accept currents up to 1A directly into the unit.

  • Brand: Dwyer
  • ASIN: B00I9IFJOM

Current Sensing Switch,Normally Open Current Sensing Switch Adjustable AC 0.2A -30A (SZC23-NO-AL-CH Model)

Current Sensing Switch,Normally Open Current Sensing Switch Adjustable

SZC23 series AC current sensing switch is designed and manufactured to solve the AC current monitoring. It uses the principle of mutual inductance to sense the AC straight-through current, isolate the AC current, and output a normally open or normally closed switching signal to directly control various automation industrial equipment, such as flash, buzzer, relay, single-chip or other power load equipment.  Features: 1. Straight-through structure design, isolation withstand voltage up to 2000V. 2. Hysteresis is less than 1% and can be used under strong magnetic conditions. 3. The outer casing is made of self-extinguishing material ABS. 4. Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on. Specification: Model: SZC23-NO-AL-CH Power supply: Not required Rated load: ≤ [email protected] AC/DC Input current: 0.2-30A AC Switch on minimum: 0.5±0.2A Maximum overload: 100% Leakage current: ≤0.1A Accuracy: 1% Hysteresis: ≤1% Response time: ≤200ms Repeatability: 100% Working temperature: -20~60℃ Waterproof: IP30 Dimensions: 65*25*47mm / 2.56*0.98*1.85in Hole diameter: 10mm / 0.4in Package weight: Approx. 56g/2.0oz Package list: 1 * Current Sensing Switch Note: 1. Due to the difference between...

  • Brand: Hilitand
  • ASIN: B07N1P6TWL
  • UPC: 719527953316

Johnson Controls CSD-SF0C0-1 Current Sensing Relay, 0.25A, Self Powered

Johnson Controls CSD-SF0C0-1 Current Sensing Relay, 0.25A, Self

The Current Switch Device (CSD) Series of digital output current switches are non-intrusive devices designed to detect current flowing through a cable or wire. A cost-effective solution for monitoring on and off status or proof of operation, these units are ideal for monitoring very small current loads on motors driving fans and blowers, pumps, heating coils, and lighting. The CSD models with command relays not only monitor the current flowing through the cable but also facilitate the start and stopping of the motor. These units also provide a universal solid-state output and do not require a power supply. Completely self-powered, these units draw their power from current induced from the cable or line being monitored.

  • Brand: Johnson Controls
  • ASIN: B00C85X9I0
  • UPC: 066201110320

Suncourt SW100 Current Switch

Suncourt SW100 Current

The AC Current Switch (SW100) can be used to switch on and off remote devices with an amp draw up to 2.5 amps, (e.g. a Suncourt Centrax Centrifugal Fan). The AC Current Switch (SW100) will provide power to a remote device when the white (neutral) wire from a triggering device (e.g. a clothes dryer) carrying 1.2 – 40 amps passes through the center of the AC Current Switch (SW100).

  • Color: Multicolored
  • Brand: Suncourt
  • ASIN: B003ZZDLQM
  • UPC: 080956958716

Fifty Shades of Grey

Fifty Shades of

  • ASIN: B00TJYYKD6

Akozon Current Sensing Switch Normally Open Current Sensing Switch Adjustable AC 0.5-200A SZC03-NO-AL-CH

Akozon Current Sensing Switch Normally Open Current Sensing

Features: SZC03 series AC current sensing switch is designed and manufactured to solve the AC current monitoring. It uses the principle of mutual inductance to sense the AC straight-through current, isolate the AC current, and output a normally open or normally closed switching signal to directly control various automation industrial equipment, such as flash, buzzer, relay, single-chip or other power load equipment. Compared with traditional mutual inductors, thermal protectors and other devices, using this device can not only get more accurate and more timely control, but can also greatly simplify the design and reduce costs. Specification: Model: SZC03-NO-AL-CH Power supply: Not required Rated load: [email protected] AC/DC Input straight-through current: 0.5-200A AC Switch on minimum: 0.5±0.2A Maximum overload of straight-through current: 200% Accuracy: 10% Power consumption: ≤1W Leakage current: ≤1mA Hysteresis: ≤1% Response time: ≤200ms Working environment: -30~70℃, 0-95%RH Dimensions: 62*90*25.5mm / 2.4*3.5*1.0in Hole diameter: 20mm / 0.8in Package weight: Approx. 80g/2.8oz   Package list: 1 * Current Sensing Switch   Note: 1. Due to the difference between monitors and light effects, the pictures may not reflect the actual color of the item. 2. Please allow slight err...

  • Brand: Akozon
  • ASIN: B07LDDZ7B7
  • UPC: 736077445399

DZS Elec 12V 2 Channel High/Low Level Trigger with Optical Isolation Relay Module Fault Tolerant Design Load AC 0-250V/10A DC 0-30V/10A Circuit Switch Board

DZS Elec 12V 2 Channel High/Low Level Trigger

Feature: Module Size: 50*41*18.5mm With 4 fixed bolt holes, diameter 3.1mm, spacing 44.5*35.5mm High and low level trigger selection: Trigger current is 2-4mA, trigger low level is 0-4V, trigger high level is 4.5-12V 1. S1 1 way relay high or low level trigger selection; 2. S2 2 way relay high or low level trigger selection; 3. com and low in short circuit, the relay is low level trigger, com and high end in short circuit, the relay is high level trigger. Input Interface: 1. DC+: to connect the power positive (voltage as the relay required 12V) 2. DC-: to connect the power negative 3. IN1: 1 way signal trigger end, can set the high or low level control relay 4. IN2: 2 way signal trigger end, can set the high or low level control relay Output Interface: 1. NO1: 1 way relay normally open interface, suspend the relay before pulling, then short connect with COM1 2. COM1:1 way relay common interface 3. NC1: 1 way relay normally close interface, short connect the relay with COM1 before pulling, then suspend 4. NO2: 2 way relay normally open relay interface, suspend the relay before pulling, then short connect with COM2 5. COM2: 2 way relay common interface 6. NC2: 2 way relay normally close interface, short connect the relay with COM2 before pulling, then suspend Package Inlcude: 1...

  • Brand: DZS Elec
  • ASIN: B0721M34CM
  • UPC: 746860363472
Similar Aprilaire Current Sensing Relay Results
Aprilaire Current Sensing Relay Video Results
           

aprilaire sensing electronic relay model # 50 bench test part 1

Aprilaire Current Sensing Relay

bench test only if you feel comfortable with electricity and understand the risk .. disclaimer .. be extreamely careful . at your own risk and all that.

Tags:

Aprilaire 700 Install and Help!

Aprilaire Current Sensing Relay

Aprilaire 700. Sorry i called the transformer a solenoid a couple times. The 35mm prime i used sucks for video and its on a crop sensor (super zoomed). I hope this helps...

Tags: April Air,700M,500A,500,Humidifer,Solenoid,Wiri...

aprilaire electronic relay model #50 bench test part 2

Aprilaire Current Sensing Relay

Tags: