Dixon Valve & Coupling BM6 Brass Hose Fitting, Mender, 3/4" Hose ID Barbed

Dixon Valve & Coupling BM6 Brass Hose Fitting,

This Dixon BM Series mender hose fitting is made of brass and is suitable for repairing a broken hose. This hose mender has barbed ends to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule (not included). It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. It is not recommended for compressible products such as air, nitrogen, or steam.Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.Dixon Valve & Coupling Company manufactures pipe and hose fittings and accessories. The company, founded in 1916, is headquartered in Chestertown, MD.

  • Brand: Dixon Valve & Coupling
  • ASIN: B00835IC7W

Joyway 3/8" ID Hose Barb, Y shaped Type 3 way Union Intersection/Split Brass Shut off Ball Valve Fitting

Joyway 3/8" ID Hose Barb, Y shaped Type

This Joyway Y hose fitting is made of forged brass and connects and branches three hoses. This fitting has barbed ends to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule (not included). It is made of forged brass for greater strength than cast brass. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.

  • Brand: Joyway
  • ASIN: B07D6CJ3Z7
  • UPC: 653445143063

Two Little Fishies ATL5450W Ball Valve for Regulating Water Flow, 5/8-Inch

Two Little Fishies ATL5450W Ball Valve for Regulating

Barbed Aquatic Ball Valves for regulating water flow through standard hose used for devices such as canister filters, pump return lines, protein skimmers, calcium reactors, etc.

  • Brand: Two Little Fishies
  • ASIN: B00025676E
  • UPC: 748172545522

OCSParts MTLB-6 3/8" Brass Barb x Barb Ball Valve, Lead Free, 0.1875" ID

OCSParts MTLB-6 3/8" Brass Barb x Barb Ball

This MTLB-6 3/8 inch Brass barb x barb ball Valve, heavy duty commercial grade lead free Brass 3/8 inch barb to barb ball Valve used for many applications.

  • Color: Original Version
  • Brand: OCSParts
  • ASIN: B072MZDND8

Parker PBPP8VUC8 Ball Valve, Barb to Barb, Polypropylene, Barb Union, 1/2"

Parker PBPP8VUC8 Ball Valve, Barb to Barb, Polypropylene,

Parker polypropylene ball valves corrosion resistant design make them ideal for water filtration units, coffee and beverage machines and various other fluid applications. Manufactured by Parker, made in United States.

  • Brand: Parker
  • ASIN: B00CH5MV6W

NIGO AN99 Series Forged Brass Mini Ball Valve, 5/16" Hose Barb x 5/16" Hose Barb, 180 Degree Operation Handle, Rated to 600WOG

NIGO AN99 Series Forged Brass Mini Ball Valve,

Products Features  * All Nigo's products conform to specifications ASTM (American Society for Testing and Materials) B124 and B16 * NPT threads on all Nigo's products meet ASME B1.20.1 * Designed for use in air, water, oil, nature, manufactured, mixed, liquefied petroleum or propane and LP Gas-Air * Use with brass, steel, and iron pipe; Teflon tape and thread sealant are recommended for threaded joints * Temperatures range from -4 to 194 F * Max. Pressure: 600 PSI WOG * Double o-ring design  * 180° operation handle * Blowout proof stem * Connections: Hose Barb x Hose Barb    About Us Nigo Industrial Co,. Ltd manufactures a wide variety of valves and pipe fittings. The company meets international organization for standardization ISO 9001:2015 Quality Management System standard.

  • Brand: Nigo Industrial Co.
  • ASIN: B074386FSP
  • UPC: 615068182225

Metalwork PEX Valve 5/8" Barb, Forged Brass, 90 Degree Turn, Full Port, 1 Pcs

Metalwork PEX Valve 5/8" Barb, Forged Brass, 90

This Full Port Pex Ball Valve feature 5/16 3/8 5/8 and 3/4 inch connections for pex tubing on both ends and is useful for heavy duty commercial and residential applications. Typical uses include domestic hot cold water systems and natural gas. The valve is operated with a chrome plated brass handle covered with a vinyl grip. The handle lever makes a 90 degree quarter turns by opening or closing a valve. The construction of heavy duty forged brass valve pressure is rated 150 PSI for steam and 600 PSI for water, oil and gas (WOG).

  • Color: 1 Pcs
  • Brand: Metalwork
  • ASIN: B07CMC62YR

NIGO 3-Way Tee Brass Hose Fitting (3, 1/4" x 1/4" x 1/4" Barb)

NIGO 3-Way Tee Brass Hose Fitting (3, 1/4"

Products Features  * Constructed from forged brass  * All Nigo's products conform to specifications ASTM (American Society for Testing and Materials) B124 and B16 * NPT threads on all Nigo's products meet ASME B1.20.1 * Designed for use in air, water, oil, nature, manufactured, mixed, liquefied petroleum or propane and LP Gas-Air * 1/4” Barbed fitting has three openings for connecting your 1/4” ID hoses   * Temperatures range from -40 to 160 F * Max. Pressure: 150 PSI WOG * Connections: Hose Barb x Hose Barb x Hose Barb  About Us Nigo Industrial Co,. Ltd manufactures a wide variety of valves and pipe fittings. The company meets international organization for standardization ISO 9001:2008 Quality Management System standard.

  • Brand: Nigo Valve
  • ASIN: B07HX952SJ
  • UPC: 615068182799

5 Pack (25 Total Fittings) Orbit 1/4 Inch Barbed Drip Irrigation Tubing Shut-off Valve - 5 Pack

5 Pack (25 Total Fittings) Orbit 1/4 Inch

Easily control water flow to your irrigation drip system with this 5-pack of drip irrigation shut-off barbed valves. Your micro irrigation system can be much more water efficient with this barb shut-off drip irrigation valve. This shut-off valve for dripper systems works with all brands of 1/4-inch sprinkler drip line so it is universal and easy to use. This drip irrigation barbed valve is ideal for do-it-yourself projects where drip watering systems are being installed. Features and Benefits: Comes in a pack of 5, Controls water flow to your plants or flowers, Connects to �-inch irrigation drip tubing, Works with all brands of drip tube for universal use, Has a watertight, spiral barb connection.

  • Color: Black
  • Brand: Orbit
  • ASIN: B071QWYMPB
  • UPC: 816602026344

Hydro Flow Premium Ball Valve 3/4 Inch Barb

Hydro Flow Premium Ball Valve 3/4 Inch

Our complete line of fittings is known for its superior performance and reliability. These non-corrosive plastic fittings are guaranteed to provided a secure, watertight and airtight connection. These fittings offer strength and durability. Hydro Flow Barbed Ball Valves regulate your hydroponic irrigation systems with a simple turn of the knob.

  • Color: N/A
  • Brand: HydroFLOW
  • ASIN: B00CJIAUDI
  • UPC: 847127008508

Rain Bird BVAL50-1S Drip Irrigation 1/2" Barbed Valve, Male x Male

Rain Bird BVAL50-1S Drip Irrigation 1/2" Barbed Valve,

Rain Bird BVAL50-1S Drip Irrigation 1/2" Barbed Valve. Install this robust barbed valve to quickly adjust or shut off flow in 1/2" and 5/8" Drip tubing runs. Helps prevent over or under watering of plants with different moisture needs. Top cap turns to adjust or completely shut-off water flow; ideal for use when making repairs or refining flow to specific plants or watering zones. High-quality barbs grab 5/8" and 1/2" Drip tubing creating a fast, secure and leak-proof connection that stays in place season after season. Constructed of highly durable UV and chemical-resistant materials to assure long life. Designed for working pressure of 0-50 PSI. Simple to insert by hand or for faster installation use Rain Bird's barbed insertion tool: FT/1PK50S (sold separately). Rain Bird “The Intelligent Use of Water”

  • Color: NA
  • Brand: Rain Bird
  • ASIN: B00J9Q2SOM
  • UPC: 077985038359

Dixon Valve TM21 Nylon Tuff-Lite Shank/Water Fitting, Mender, 1-1/2" Hose ID

Dixon Valve TM21 Nylon Tuff-Lite Shank/Water Fitting, Mender,

Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.Dixon Valve & Coupling Company manufactures pipe and hose fittings and accessories. The company, founded in 1916, is headquartered in Chestertown, MD.

  • Brand: Dixon
  • ASIN: B00DE7ZIH6

Yamlion Drip Irrigation Fittings Kit, Irrigation Barbed Connectors for 1/2" Tubing 34 Piece - 2 Switch Valves, 8 Couplings, 8 Tees, 8 Elbows and 8 End Cap Plugs, Irrigation Water Hose Connector

Yamlion Drip Irrigation Fittings Kit, Irrigation Barbed Connectors

The drip irrigation fitting kits are the best choice for building your drip irrigation systems for your garden, flower bed, patio, lawn Feature: 1.Our Drip Irrigation Kit is made of environmentally friendly UV resistant high-impact plastic and inexpensive with large quantity. The various kits meet your entire Drip Irrigation Systems 2.Compatible with all 1/2 inch 16 mm irrigation tubing (.520-.540" ID) 3.The barb design facilitates the close fitting of the drip connector to the hose to prevent leakage 4.The hose connector can be easily installed without any additional tools. A great solution for indoor appliances and outdoor gardens Specifications: Material: UV resistant high-impact plastic Color: black Size:as the picture 3 Fits:1/2 inch irrigation tubing (16mm .520-.540" ID) Package Includes: Total 34 Pieces 2xSwitch Valves 8xCouplings 8xTees 8xElbows 8xEnd Cap Plugs Notes: 1.Soften the tubing before installing the fittings, you can let the tubing rest in the hot sun, or briefly bake with a heat gun or blower before inserting the fitting 2.You'd better measure the tubing and hose inner diameter. Make sure the size and accessories are suitable

  • Color: Black
  • Brand: Yamlion
  • ASIN: B07TCMNJM1

NIGO 3-Way Tee Brass Hose Fitting 5/16" x 5/16" x 5/16" Barb

NIGO 3-Way Tee Brass Hose Fitting 5/16" x

Products Features  * Constructed from forged brass  * All Nigo's products conform to specifications ASTM (American Society for Testing and Materials) B124 and B16 * NPT threads on all Nigo's products meet ASME B1.20.1 * Designed for use in air, water, oil, nature, manufactured, mixed, liquefied petroleum or propane and LP Gas-Air * 5/16” Barbed fitting has three openings for connecting your 5/16” ID hoses   * Temperatures range from -40 to 160 F * Max. Pressure: 150 PSI WOG * Connections: Hose Barb x Hose Barb x Hose Barb  About Us Nigo Industrial Co,. Ltd manufactures a wide variety of valves and pipe fittings. The company meets international organization for standardization ISO 9001:2008 Quality Management System standard.

  • Brand: Nigo Industrial Co.
  • ASIN: B077BH1T7T
  • UPC: 615068182560

Dixon 179-1212 Brass Hose Splicer Fitting, Tee, 3/4" Hose ID Barbed

Dixon 179-1212 Brass Hose Splicer Fitting, Tee, 3/4"

This Dixon 179 Series tee hose fitting is made of forged brass and connects and branches three hoses. This tee fitting has barbed ends to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule (not included). It is made of forged brass for greater strength than cast brass.Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.Dixon Valve & Coupling Company manufactures pipe and hose fittings and accessories. The company, founded in 1916, is headquartered in Chestertown, MD.

  • Brand: Dixon
  • ASIN: B00835HWRS
  • UPC: 697464427049

Joywayus 3/8" 10mm Plastic Pagoda Barbed Equal 3 Way T Shaped Hose Connector Pipe Fitting Tube Joint(Pack of 10)

Joywayus 3/8" 10mm Plastic Pagoda Barbed Equal 3

Material: Plastic.Model number:10mm.Type: T shaped.

  • Brand: Joywayus
  • ASIN: B07MW4LFPK
  • UPC: 753936285897

uxcell Brass Air Ball Valve Shut Off Switch 3/8" Hose Barb to 3/8" Hose Barb Pipe Tubing Fitting Coupler 180 Degree Operation Handle 4Pcs

uxcell Brass Air Ball Valve Shut Off Switch

Features:Connections: 3/8" Hose Barb x 3/8" Hose Barb.180 Degree operation handle. Red Plastic-covered lever handle for on/off manual control.Easy Installation in tight working spaces.Used widely in piping system and gas supplying system. Specifications:Material: BrassColor: Brass, RedTube Size: 47mm x 16mm x 29mm / 1.85" x 0.63" x 1.14"(L*W*H)Hose Barb Length: 14mm / 0.55"Hose Barb Dia: 10mm / 3/8" Package Contents: 4Pcs x Ball Valve

  • Brand: uxcell
  • ASIN: B07RHYGBRD

Banjo HB075 Polypropylene Hose Fitting, Adapter, 3/4" NPT Male x 3/4" Barbed

Banjo HB075 Polypropylene Hose Fitting, Adapter, 3/4" NPT

This Banjo HB075 barbed hose adapter is made of glass-reinforced polypropylene and has a 3/4" barbed connection on one end and a 3/4" male NPT threaded connection on the other to connect a tube or a hose to a female NPT threaded connection. This schedule 80 adapter is made of glass-reinforced polypropylene for rigidity, lightweight, dimensional stability, and resistance to high impact, heat, corrosion, and most chemicals. The barbed connection creates a tight seal on a tube or hose, and the male National Pipe Taper (NPT) threaded end connects with a female NPT threaded connection. The integral 1-1/8" hex nut provides a gripping surface for a wrench when tightening the fitting. The maximum working pressure for this fitting is 150 pounds per square inch (psi) at 70 degrees F. This barbed hose adapter is suitable for use in agricultural and industrial systems for liquid flow applications.Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted s...

  • Color: Black
  • Brand: Banjo Corp
  • ASIN: B0019J1UOQ
  • UPC: 791206004106

NIGO AN99 Series Forged Brass Mini Ball Valve, 5/16" Hose Barb x 5/16" Hose Barb, 180 Degree Operation Handle, Rated to 600WOG - 3 Pack

NIGO AN99 Series Forged Brass Mini Ball Valve,

Products Features  * All Nigo's products conform to specifications ASTM (American Society for Testing and Materials) B124 and B16 * NPT threads on all Nigo's products meet ASME B1.20.1 * Designed for use in air, water, oil, nature, manufactured, mixed, liquefied petroleum or propane and LP Gas-Air * Use with brass, steel, and iron pipe; Teflon tape and thread sealant are recommended for threaded joints * Temperatures range from -4 to 194 F * Max. Pressure: 600 PSI WOG * Double o-ring design  * 180° operation handle * Blowout proof stem * Connections: Hose Barb x Hose Barb    About Us Nigo Industrial Co,. Ltd manufactures a wide variety of valves and pipe fittings. The company meets international organization for standardization ISO 9001:2015 Quality Management System standard.

  • Brand: Nigo Industrial Co.
  • ASIN: B07439Y51F
  • UPC: 615068182232

Valve 3/8 Hb X 3/8 Hb 2pack (5901061)

Valve 3/8 Hb X 3/8 Hb 2pack

Highlights: 3/8" poly hose valve 150 PSI maximum operating pressure Splice in line to give you the ability to shut off flow Pack Of 2

  • Brand: Valley Industries
  • ASIN: B006P1SR08
  • UPC: 814485010771
Similar Barbed Hose Valve Results
Barbed Hose Valve Video Results
           

How to fit a Gardiner Pole Valve using Stem to Barb Adapters

Barbed Hose Valve

Quick guide to fitting a push-fit flow valve using stem to barb adapter, O clips and PVC hose

Tags: Gardiner Pole Systems,Waterfed,Pole,Water,Fed,W...

About Barbed Insert Fittings

Barbed Hose Valve

Barbed fittings are used for lower pressure applications with flexible tubing, like rubber, vinyl, polyethylene, polypropylene, and others - think tap lines and soda fountains. Because they’re insert fittings, they’re sized by the inside diameter (ID) of tubing. Fortunately, most tubing has the I...

Tags: barbed fitting,plumbing,Piping And Plumbing Fit...

How to Connect Poly Pipe to ANYTHING using Barbed Fittings

Barbed Hose Valve

Chris shows you how easy it is to connect Polyethylene (black plastic pipe or poly pipe) to just about anything using barbed fittings. In the video, he uses a stainless steel insert fitting with male NPT threads (Male Adapter). Barbed insert fittings are also available with female NPT threads (Fe...

Tags: RC worst,rcworst,rc,worst,rcworst youtube,Water...