Legines Brass Inverted Flare Fitting,Legines Brass Straight Inverted Flare Female Brake Line Adapter Fitting, Female Connector, 3/8" Tube OD x 1/4" NPT Female, Pack of 2

Legines Brass Inverted Flare Fitting,Legines Brass Straight Inverted

Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.

  • Brand: Legines
  • ASIN: B077GPF3HY

Legines Brass Inverted Flare Fitting, Barstock Brake Line 90 Degree Male Elbow, 1/2" Tube OD x 1/2" NPT Male, Pack of 2

Legines Brass Inverted Flare Fitting, Barstock Brake Line

Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.

  • Brand: Legines
  • ASIN: B077GQXF8H

Parker Hannifin 166FSV-6-6-pk5 Swivel Elbow, Brass, 90 Degree, Flare Fitting, 45 Degree, 3/8" Flare Tube x 3/8" Female NPT Flare Swivel (Pack of 5)

Parker Hannifin 166FSV-6-6-pk5 Swivel Elbow, Brass, 90 Degree,

Parker's 45 degree flare fittings are economical for a metal-to-metal seal that are designed for high pressure service and have exceptional resistance to mechanical pull out. The positive nature of the connection with the flare on the tube clamped between the nut and the body makes for extreme dependability and safety. Flare fittings are appropriate alternatives for solder Type joints where an open flame is either not desired or impractical. Fittings are available in forgings for refrigeration applications. Fittings meet functional requirements of SAE J512 and J513.

  • Brand: Parker Hannifin
  • ASIN: B074PVRCGK

John Guest MI4508F4SLF Female Flare Connector, 1/4" OD x 1/4 (Pack of 10)

John Guest MI4508F4SLF Female Flare Connector, 1/4" OD

Lead free brass pushfit female flare fitting threads onto male flare to provide permanent or removable leak free connection.

  • Brand: John Guest
  • ASIN: B00N4NIMXC
  • UPC: 665626120701

Anderson Metals Brass Tube Fitting, 90 Degree Elbow, 3/8" Flare x 3/8" Female Pipe

Anderson Metals Brass Tube Fitting, 90 Degree Elbow,

The Anderson Metals elbow is made of brass and has flare and National Pipe Taper (NPT) connectors. This 90-degree elbow fitting, also called "ell," connects two pipes at a 90-degree angle to change the direction of flow between pipes. It has a 45-degree flare connection on one end and an NPT female connection on the other. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting has 45-degree flared construction for a stronger connection than soldered, long-term reliability, and for use in installations where flames or heat are not allowed. The operating temperatures range from -65 to 250 degrees F. This fitting is for use in fuel equipment, plumbing, gas, refrigeration, and vacuum applications. It is suitable for copper, brass, aluminum, and steel tubing. Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Flared fittings are alternatives to solder-type joints and are used when the use of an open flame from a soldering iron is impractical or prohibited. The most common flare fitting standards are the 45-degree and 37-degree flare. When purchasing fittings, consider the application, as this will affec...

  • Brand: Anderson Metals
  • ASIN: B000BO8OMG
  • UPC: 719852935261

Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 1/4" Male Pipe

Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare

This Anderson Metals half union compression tube fitting is made of brass, has a flared tube connection and a male NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting can be used with copper, brass, aluminum, or steel tubing to connect and disconnect two tubes more easily than with a coupling. It has a flared tube connection on one end and a male National Pipe Taper (NPT) connection on the other for connecting to a female NPT threaded tube, creating a tighter seal than straight threads. This fitting is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This half union compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types ...

  • Brand: Anderson Metals
  • ASIN: B003RW4IWE
  • UPC: 719852935070

Midland 10-462 Brass SAE 45 Degree Flare Reducer, 1/4" Male Flare x 3/8" Female Flare Thread, 0.81" Hex Size

Midland 10-462 Brass SAE 45 Degree Flare Reducer,

Lp and natural gas, Flammable liquids, instrumentation, refrigeration, power steering, hydraulic and Pneumatic systems.

  • Brand: Midland
  • ASIN: B00OKTBEQ6

Fuel or Gas Line Brass Fitting [46F0604] Connector Coupling, 3/8 Flare x 1/4 Female NPT, 46F 0604 100% BRASS

Fuel or Gas Line Brass Fitting [46F0604] Connector

  • ASIN: B00JX1AGC4
  • UPC: 730051946643

LTWFITTING Brass 5/8" OD x 1/2" Female NPT 45 Deg Flare 90 Degree Flare Elbow Tube Fitting(Pack of 5)

LTWFITTING Brass 5/8" OD x 1/2" Female NPT

Product Description Durable and high standard brass female elbow. Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way. Click "honest-f" to choose the product you want in our shop. Features - Materies: Brass. - Net Weight: 90g/pc. - Type: 90 Degree Flare Female Elbow. - Tube Size : 5/8" OD. - Thread: 1/2" Female NPT. Important Notes Pay attention to the column of size and color, you could find a variety of product types and quantities for your choice. The more your purchase the best price you get. About Shipping Great stock availability and fast dispatch are our core business. We would make effort to process each order within 24 hours. We are international seller, each item is required to be checked by two customs. China Post Air Mail and epacket are our main carriers, it normally takes about 1-2 weeks to deliver to US. If you do not receive the item during this period or have any problems, kindly contact us firstly. You can rest assured we would handle each order no matter big or small as faster as we can. About Us We are honest seller, any problems please contact us before leaving your feedback. We will try our best to work out the issue with you. These products come from our joint factory, its annual output is about...

  • Color: Pack of 5
  • Brand: LTWFITTING
  • ASIN: B00Y856P8O
  • UPC: 786471305317

Parker 146HBLFSV-4-6 Hose Barb Fitting, Barb to Female Flare, Brass, Barb and Female Flare Swivel Female Flare, 1/4" and 3/8"

Parker 146HBLFSV-4-6 Hose Barb Fitting, Barb to Female

Parker Brass hose barb fittings are an economical choice for general purpose fluid handling and pneumatics, available in both tapered and beaded barb styles. Manufactured by Parker, made in United States.

  • Brand: Parker
  • ASIN: B009OWZM08

Vis Brass SAE 45 Degree Flare Tube Fitting, Coupling, Adapter (1, 3/8" Flare x 1/8" NPT Female)

Vis Brass SAE 45 Degree Flare Tube Fitting,

This flare fitting adapter is suitable for connecting a tube to a pipe in a range of fluid transfer applications. It has female National Pipe Taper (NPT) threads on one end and 7/16-20 male Society of Automotive Engineers (SAE) threads on the other. The fitting is made of CA360 brass for strength and resistance to corrosion, has an operating temperature range of -65 to +250 degrees F (-53 to +121 degrees C), and meets SAE 010103 specifications for tube fittings. This flare fitting adapter is suitable for use in lubrication, refrigeration, and hydraulic systems, and in other industrial applications. Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.

  • Brand: Vis
  • ASIN: B07HNTCPV1

EDGE INDUSTRIAL 3/16" Hose ID to 1/4" 45° SAE/37° JIC Dual SEAT Female Flare Brass Crimped Swivel Connector Fuel / AIR / Water / Oil / Gas / WOG (Qty 01)

EDGE INDUSTRIAL 3/16" Hose ID to 1/4" 45°

3/16" Hose ID x 1/4" Dual Swivel, 45° SAE / 37° JIC Brass Swivel Barb Connector. Crimped Style. This is a Dual Seat Swivel with SAE and JIC angles. 150 PSI maximum working pressure. -40° to 160° temperature rating. Not deemed lead free. Not for use with potable water. Please Note: NPT Thread size is NOT determined by its outside thread diameter in inches. Please review our attached NPT sizing chart to cross reference NPT thread size to linear inches

  • Brand: EDGE INDUSTRIAL
  • ASIN: B07CZ5TKC4
  • UPC: 691023894495

Anderson Metals Brass Tube Fitting, Coupling, 3/8" Flare x 1/4" Female Pipe

Anderson Metals Brass Tube Fitting, Coupling, 3/8" Flare

This Anderson Metals coupling compression tube fitting is made of brass, has a flared tube connection and a female NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting can be used with copper, brass, aluminum, or steel tubing to connect two tubes of the same diameter in a straight run. It has a flared tube connection on one end and a female National Pipe Taper (NPT) connection on the other, creating a tighter seal than straight threads. This fitting is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This coupling compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, an...

  • Brand: Anderson Metals
  • ASIN: B001HOSYOC
  • UPC: 719852934967

Legines Brass Inverted Flare Fitting, Brake Line Adapter, Male Connector, 5/16" Tube OD x 1/4" NPT Male, Pack of 2

Legines Brass Inverted Flare Fitting, Brake Line Adapter,

Typical application: Hydraulic brake, power steering, fuel lines and trans-mission cooler lines, LP and natural gas. Pressure: Working pressure up to 2000psi depending on Tube (O.D),Will withstand burst pres-sure 5000psi with bundy-weld. Temperature Range: -65°F to +250°F,-53°C to +120°C Used With: copper, brass aluminum and steel hydraulic tubing. Material: CA360 Brass

  • Brand: Legines
  • ASIN: B077GNJLWH

EDGE INDUSTRIAL 1/4" Hose ID to 5/16" 45° SAE/37° JIC Dual SEAT Female Flare Brass Swivel Connector Fuel / AIR / Water / Oil / Gas / WOG (Qty 01)

EDGE INDUSTRIAL 1/4" Hose ID to 5/16" 45°

1/4" Hose ID x 5/16" Dual Swivel, 45° SAE / 37° JIC Brass Swivel Barb Connector. This is a Dual Seat Swivel with SAE and JIC angles. 150 PSI maximum working pressure. -40° to 160° temperature rating. Not deemed lead free. Not for use with potable water. Please Note: NPT Thread size is NOT determined by its outside thread diameter in inches. Please review our attached NPT sizing chart to cross reference NPT thread size to linear inches

  • Brand: EDGE INDUSTRIAL
  • ASIN: B07CZ68HZW
  • UPC: 691023894525

Legines Brass SAE 45 Degree Flare Tube Fitting, Female Adapter, 1/4" Male Flare x 1/8" NPT Female, Pack of 2

Legines Brass SAE 45 Degree Flare Tube Fitting,

This Anderson Metals coupling compression tube fitting is made of brass, has a flared tube connection and a female NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting can be used with copper, brass, aluminum, or steel tubing to connect two tubes of the same diameter in a straight run. It has a flared tube connection on one end and a female National Pipe Taper (NPT) connection on the other, creating a tighter seal than straight threads. This fitting is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This coupling compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications. Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, a...

  • Brand: Legines
  • ASIN: B0771B5Q3C

NIGO Brass Tube Fitting, Half-Union, Flare x NPT Male Pipe (1, 1/4" Flare x 1/4" NPT Male)

NIGO Brass Tube Fitting, Half-Union, Flare x NPT

  • Brand: Nigo Valve
  • ASIN: B079M6H3S4
  • UPC: 615068182614

NIGO Brass Tube Fitting, SAE 45 Degree Flare Fitting, Cap Nut (3/8")

NIGO Brass Tube Fitting, SAE 45 Degree Flare

Products Features  * Constructed from forged brass * All Nigo's products conform to specifications ASTM (American Society for Testing and Materials) B124 and B16 * NPT threads on all Nigo's products meet ASME B1.20.1 * Designed for use in air, water, oil, nature, manufactured, mixed, liquefied petroleum or propane and LP Gas-Air * Used with brass, copper, iron tubing (3/8" tube O.D.) for closing a male pipe or fitting end * Tube Size (Nominal Pipe Size): 3/8 Inch ; Flare Thread Size: 5/8-18 ; Actual Inside Diameter (Female Flare Thread I.D.): 0.57 Inch (9/16 Inch) {{Please note that flare size is a nominal pipe size and it does not represent the actual diameter}} * Temperatures range from -65 to 250 F * Max. Pressure: 1000 PSI WOG  About Us Nigo Industrial Co,. Ltd manufactures a wide variety of valves and pipe fittings. The company meets international organization for standardization ISO 9001:2015 Quality Management System standard.

  • Brand: Nigo Industrial Co.
  • ASIN: B079DL68PS
  • UPC: 615068182591

LTWFITTING Brass Flare 1/2" OD x 3/8" Female NPT 45 Deg Flare 90 Degree Elbow Tube Fitting(Pack of 5)

LTWFITTING Brass Flare 1/2" OD x 3/8" Female

Product Description Durable and high standard brass female elbow. Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way. Click "honest-f" to choose the product you want in our shop. Features - Materies: Brass. - Net Weight: 51g/pc. - Type: 90 Degree Flare Female Elbow. - Tube Size : 1/2" OD. - Thread: 3/8" Female NPT. Important Notes Pay attention to the column of size and color, you could find a variety of product types and quantities for your choice. The more your purchase the best price you get. About Shipping Great stock availability and fast dispatch are our core business. We would make effort to process each order within 24 hours. We are international seller, each item is required to be checked by two customs. China Post Air Mail and epacket are our main carriers, it normally takes about 1-2 weeks to deliver to US. If you do not receive the item during this period or have any problems, kindly contact us firstly. You can rest assured we would handle each order no matter big or small as faster as we can. About Us We are honest seller, any problems please contact us before leaving your feedback. We will try our best to work out the issue with you. These products come from our joint factory, its annual output is about...

  • Color: Pack of 5
  • Brand: LTWFITTING
  • ASIN: B00Y8565F2
  • UPC: 786471305249

LTWFITTING Brass Flare 1/4" OD x 1/2" Female NPT Connector/Adapter Tube Fitting(Pack of 20)

LTWFITTING Brass Flare 1/4" OD x 1/2" Female

Product Description Durable and high standard brass flare female connector. Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way. Click "honest-f" to choose the product you want in our shop. Features - Materies: Brass. - Net Weight: 38g/pc. - Type: Flare Female Connector. - Tube Size : 1/4" OD. - Thread: 1/2" Female NPT. Important Notes Pay attention to the column of size and color, you could find a variety of product types and quantities for your choice. The more your purchase the best price you get. About Shipping Great stock availability and fast dispatch are our core business. We would make effort to process each order within 24 hours. We are international seller, each item is required to be checked by two customs. China Post Air Mail and epacket are our main carriers, it normally takes about 1-2 weeks to deliver to US. If you do not receive the item during this period or have any problems, kindly contact us firstly. You can rest assured we would handle each order no matter big or small as faster as we can. About Us We are honest seller, any problems please contact us before leaving your feedback. We will try our best to work out the issue with you. These products come from our joint factory, its annual output is a...

  • Color: Pack of 20
  • Brand: LTWFITTING
  • ASIN: B00LBPOLRG
  • UPC: 786471303214
Similar Brass Female Flare Results
Brass Female Flare Video Results
           

How to Install a Flare Fitting

Brass Female Flare

Learn how to install a flare fitting onto copper, brass, aluminum or welded steel tubing. For more information about BrassCraft products, please visit our website at http://www.brasscraft.com or contact BrassCraft customer service at (877) 272-7755.

Tags: BrassCraft,brass craft,brass fitting,fittings,h...

Flare copper tubing with flaring clamp for gas fitting, plumbing connection

Brass Female Flare

Tool can be ordered from our site - https://mrhardware.com/store/#!/Plumb-Pak-Flaring-Tool-Set/p/138280712 Shows use of proper tools for flaring copper tube, explains compression fitting limitations, and advantages of flare, like dryer gas lines must be flared.

Tags: How-To,Flare Fitting,Copper Tubing,Piping And P...

How to Build a Venturi Forge Burner for Only $21

Brass Female Flare

Here is a how-to video for building a simple venturi burner for your forge! This is a simple to build, cheap burner that is more than adequate for the budding bladesmith or blacksmith. At a price tag of only $21 dollars it's hard to beat! Frosty's Plans: http://www.blacksmither.com/wp-content/...

Tags: How to Build a Venturi Forge Burner,how to buil...