Valterra 200-C20 PVC Swing/Spring Combination Check Valve, Clear, 2" Slip

Valterra 200-C20 PVC Swing/Spring Combination Check Valve, Clear,

This Valterra 200-C20 check valve is made of clear schedule 40 PVC (polyvinyl chloride) for strength and resistance to corrosion and mild chemicals. Its EPDM (ethylene propylene diene monomer) seal resists degradation caused by water and oils, and its swing/spring combination design allows the valve to be installed in any position. It has a 2" slip connection at each end, which must be fastened with glue, a maximum pressure rating of 150 pounds per square inch (psi), and a spring tension of 1/2 lb. This check valve is suitable for use with landscape and irrigation, pool and spa, aquaculture, and general purpose applications.Check valves have two ports and restrict the flow of fluids and other loose materials through a pipe or passageway to one direction. Flow enters through one port and exits through the other, closing when flow reverses or stops. Two common types of check valves are ball cone valves and swing check valves. A ball cone valve utilizes a spring-loaded ball seated against a cone-shaped interior surface to stop the flow of fluid in a forward direction, and a swing check valve has a movable disc on a hinge to block reverse flow. Check valves are rated by their cracking pressure (the minimum upstream pressure required for the valve to operate), and they are used in var...

  • Color: Clear
  • Brand: Valterra
  • ASIN: B0064TQ45G
  • UPC: 637509103699

Valterra 200-20W PVC Swing (No Spring) Check Valve, White, 2" Slip

Valterra 200-20W PVC Swing (No Spring) Check Valve,

This Valterra 200-20W check valve is made of white schedule 40 PVC (polyvinyl chloride) for strength and resistance to corrosion and mild chemicals. Its EPDM (ethylene propylene diene monomer) seal resists degradation caused by water and oils, and its full flow construction allows for insignificant flow loss at the swing check, so no spring is needed. It has 2" slip connections at both ends, which must be fastened with glue, and a maximum pressure rating of 150 pounds per square inch (psi). This check valve is suitable for use with landscape and irrigation, pool and spa, aquaculture, and general purpose applications.Check valves have two ports and restrict the flow of fluids and other loose materials through a pipe or passageway to one direction. Flow enters through one port and exits through the other, closing when flow reverses or stops. Two common types of check valves are ball cone valves and swing check valves. A ball cone valve utilizes a spring-loaded ball seated against a cone-shaped interior surface to stop the flow of fluid in a forward direction, and a swing check valve has a movable disc on a hinge to block reverse flow. Check valves are rated by their cracking pressure (the minimum upstream pressure required for the valve to operate), and they are used in various wat...

  • Color: white
  • Brand: Valterra
  • ASIN: B005OTLJIE
  • UPC: 019079902054

Waterway 600-7030 Straight 1.5" Slip x 2" Spigot Pool & Spa Swing Check Valve

Waterway 600-7030 Straight 1.5" Slip x 2" Spigot

Waterway Plastics TruSeal Swing Check Valves & 3" Check Valve, 1 1/2" Socket x 2" Spigot - Straight Body - CPVC. Waterway Check Valves have a clear lid with union lock ring and a bright seal flapper for easy inspection and quick access. The Waterway Check Valves have the swing design to be used for both return and intake water. CPVC Hi-Temp plastic body which features deeper sockets than others for better glue joints, and is available in a straight body or 90 degree style. Features: Union Lock Ring allows for easy access - no screw holes to strip out (excludes 600-0111); Seal flapper is made of hi-tech thermoplastic polymer; Corrosion proof pin and stainless steel spring; Reversible flow; CPVC body for most demanding applications; Low Back Pressure and High Flow characteristics make it perfect for hydraulically demanding applications.

  • Brand: Waterway
  • ASIN: B00HELZ85A
  • UPC: 702811385962

Valterra 200-C20W PVC Swing (No Spring) Check Valve, Clear Blue, 2" Slip

Valterra 200-C20W PVC Swing (No Spring) Check Valve,

This Valterra 200-C20W check valve is made of schedule 40 (standard wall) PVC for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC (polyvinyl chloride) pipes and fittings or can be connected to other materials such as steel, copper, or cast iron using transition fittings. Its full flow design allows for insignificant flow loss at the swing check, so no spring is needed. It has 2" slip connectors at both ends to connect to pipes with a smooth bore for enhanced flow and has a maximum pressure rating of 150 psi. This check valve meets ASTM International and American National Standards Institute (ANSI) standards and is suitable for use with landscape and irrigation, pool and spa, aquaculture, and general purpose applications.Check valves have two ports and restrict the flow of fluids and other loose materials through a pipe or passageway to one direction. Flow enters through one port and exits through the other, closing when flow reverses or stops. Two common types of check valves are ball cone valves and swing check valves. A ball cone valve utilizes a spring-loaded ball seated against a cone-shaped interior surface to stop the flow of fluid in a forward direction, and a swing check valve has a movable disc on...

  • Color: White
  • Brand: Valterra
  • ASIN: B00B95U3TS
  • UPC: 019079202062

Custom Molded Products Check Valve 2" inch Female Slip X Slip SCH 40

Custom Molded Products Check Valve 2" inch Female

CUSTOM MOLDED PRODUCTS CMP 25062-209-000 Check Valve 2" inch Female Slip X Slip SCH 40 Use also where minimum head loss or flow resistance is required, or in swimming pools, Ponds, hot tubs, industrial applications, Solar or spa applications. Also can be used in irrigation systems, and for preventing backflow of corrosive materials in waste water lines, sump pump disposal lines, sewage lift stations or ejector systems.

  • Color: CLEAR
  • Brand: Custom Molded Products
  • ASIN: B0189VP4GG
  • UPC: 849640025291

Aquascape Dual Union Check Valve 2.0 for Pond, Waterfall and Water Feature Pumps | 48026

Aquascape Dual Union Check Valve 2.0 for Pond,

Dual Union Check Valve 2.0 for Pond, Waterfall and Water Feature Pumps Skimmer and Pump Installation - # 48026 The innovative AquascapePRO Dual Union Check Valve 2.0 provides a professional pump and plumbing connection inside skimmer filter systems, as well as Pondless Water Vaults. The heavy-duty, swing-style check valve flapper maximizes water flow through the valve when open, while preventing the backflow of water when the pump is shut off or during a power outage. Union connections on both both sides of the valve make pump and filter maintenance quick and easy without the use of tools. A set of innovative reversible fittings take the guesswork out of finding the right pump or filter fitting and allows the extension of valve height for taller filter applications, making this a truly universal check valve designed for water features. - Connects the pump to water feature plumbing - Innovative reversible fittings allow for universal application - Prevents water backflow when the pump is not operating - Dual-union, tool-free design makes maintenance quick and easy - Heavy-duty swing-style check valve flapper - Height extendable for larger filters and pumps Aquascape is passionate about water gardening and koi fish ponds, providing unique products, designs and ...

  • Color: Black
  • Brand: Aquascape
  • ASIN: B01MUHJMHG
  • UPC: 827807480268

Valterra 200-CU20 PVC Swing/Spring Combination Check Valve, Clear, 2" Union

Valterra 200-CU20 PVC Swing/Spring Combination Check Valve, Clear,

This Valterra 200-CU20 union check valve is made of clear schedule 40 PVC (polyvinyl chloride) for strength and resistance to corrosion and mild chemicals. Its EPDM (ethylene propylene diene monomer) seal resists degradation caused by water and oils, and the swing/spring construction of this valve makes it possible to install it in any position. It has a 2" slip connection at each end, which must be fastened with glue, a maximum pressure rating of 150 pounds per square inch (psi), and a spring tension of 1/2 lb. This check valve is suitable for use with landscape and irrigation, pool and spa, aquaculture, and general purpose applications.Check valves have two ports and restrict the flow of fluids and other loose materials through a pipe or passageway to one direction. Flow enters through one port and exits through the other, closing when flow reverses or stops. Two common types of check valves are ball cone valves and swing check valves. A ball cone valve utilizes a spring-loaded ball seated against a cone-shaped interior surface to stop the flow of fluid in a forward direction, and a swing check valve has a movable disc on a hinge to block reverse flow. Check valves are rated by their cracking pressure (the minimum upstream pressure required for the valve to operate), and they a...

  • Color: Clear
  • Brand: Valterra
  • ASIN: B00B95UUJQ
  • UPC: 019079704207

Spears S1520C20 PVC Utility Swing Check Valve, 2-Inch, Clear

Spears S1520C20 PVC Utility Swing Check Valve, 2-Inch,

The PVC clear utility swing check valve is engineered for maximum flow, quick response and positive shutoff. It offers a compact, high performance check valve for landscape and irrigation, pool and spa, aquaculture, OEM 1 and many general purpose applications. Features compact, space-saving design. Constructed of all plastic material, no metal part is used. Angled seat and weighted flapper for low-pressure seal. Allows full flow fluid transfer. Quick-response, low closing pressure disc. Top entry allows easy access to components without removing valve from system. Convenient O-ring drain plug allows quick-flush of accumulated debris. High grade EPDM seat. Suitable for horizontal or vertical up-flow installations. Socket, threaded or SR threaded end connections. Measures 2-inch in size.

  • Brand: Spears
  • ASIN: B004VTD10C
  • UPC: 054211988060

Valterra 700-20 PVC Ball Valve, White, 2" Slip

Valterra 700-20 PVC Ball Valve, White, 2"

This Valterra 700-20 ball valve is made of white schedule 40 PVC (polyvinyl chloride) for strength and resistance to corrosion and mild chemicals, and is suitable for use as an inline valve for connecting two pipes going in the same direction. It has a maximum operating pressure of 150 pounds per square inch (psi), and two 2" female slip connections. This ball valve is suitable for use with landscape and irrigation, pool and spa, aquaculture, and general purpose applications. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter or the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and termed reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have...

  • Color: White
  • Brand: Valterra
  • ASIN: B000PR3FF0
  • UPC: 019079707000

American Valve P32S 2" PVC In-Line Check Socket Schedule 40, 2-Inch

American Valve P32S 2" PVC In-Line Check Socket

The American Valve P32S is an in-line check valve with socket connections. It may be installed vertically or horizontally, is used to stop backflow and siphoning, and ensures worry-free operation. This valve is not recommended for service or test with compressed air or gasses.

  • Brand: American Valve
  • ASIN: B000LF61DY
  • UPC: 611918012070

Jandy Check Valve, Zodiac, 1-1/2 Slip/2" Spigot, 180 degree

Jandy Check Valve, Zodiac, 1-1/2 Slip/2" Spigot, 180

Check Valve, Jandy/Zodiac, 1-1/2" Slip/2" Spigot, 180 degree

  • Brand: Jandy
  • ASIN: B006H48DDY
  • UPC: 753610336624

HICO 2 PVC True Union Swing Check Valve IPS White 2 inch (1-Pack)

HICO 2 PVC True Union Swing Check Valve

2" PVC True Union Swing Check Valve IPS

  • Color: White
  • Brand: HICO
  • ASIN: B072JBMXCY
  • UPC: 052892011510

Jandy 7235 180-Dgree, 1-1/2-Inch to 2-Inch Check Valve

Jandy 7235 180-Dgree, 1-1/2-Inch to 2-Inch Check

180-Degree, 1-1/2-Inch to 2-Inch Check Valve

  • Brand: Jandy
  • ASIN: B001I7MUUM
  • UPC: 052337002967

Pentair 263037 3-Way PVC 1-1/2 inch (2 inch slip outside) Pool And Spa Diverter Valve

Pentair 263037 3-Way PVC 1-1/2 inch (2 inch

3-Way PVC 1-1/2 inch (2 inch slip outside) Pool And Spa Diverter Valve

  • Color: Grey/Black
  • Brand: Pentair
  • ASIN: B002FQJ2ZG
  • UPC: 720698810469

Valterra 200-15AC PVC Air Check Valve, White, 1-1/2" Slip 2" Spigot Compact Air CV

Valterra 200-15AC PVC Air Check Valve, White, 1-1/2"

This Valterra 200-15AC air check valve is made of white schedule 40 PVC (polyvinyl chloride) for strength and resistance to corrosion and mild chemicals. Its EPDM (ethylene propylene diene monomer) seal resists degradation caused by water and oils. It has a maximum pressure rating of 150 pounds per square inch (psi) and a spring tension of 1/4 lb. This air check valve has a 1-1/2" slip connection and a 2" spigot connection that must be fastened with glue. It is suitable for one-directional air flow applications such as pools, spas, and aquaculture.Check valves have two ports and restrict the flow of fluids and other loose materials through a pipe or passageway to one direction. Flow enters through one port and exits through the other, closing when flow reverses or stops. Two common types of check valves are ball cone valves and swing check valves. A ball cone valve utilizes a spring-loaded ball seated against a cone-shaped interior surface to stop the flow of fluid in a forward direction, and a swing check valve has a movable disc on a hinge to block reverse flow. Check valves are rated by their cracking pressure (the minimum upstream pressure required for the valve to operate), and they are used in various water, gas, air, and steam lines.Valterra Products manufactures and distr...

  • Color: White
  • Brand: Valterra
  • ASIN: B00B95QLX0
  • UPC: 019079902153

Pentair 263060 2-Way CPVC 2-1/2 Inch (3 Inch Slip Outside) Pool and Spa Check Valve

Pentair 263060 2-Way CPVC 2-1/2 Inch (3 Inch

FullFloXF 2-way, 3-way and check valves provide higher flow rates and produce much lower water pressure drop. These valves are ideal for diverting, shutoff, or mixing applications. The polytetraflouroethylene (PTFE) composite diverter seal requires no lubrication. Field-adjustable stops ensure precise positioning while simplifying use, and the extra wide diverter offers superior sealing when used with actuators. The check valves have a gray flapper which makes it easy to see when the valve is open or closed.Features:2.5" X 3" Plumbing. (This valve can be plumbed using either 2.5" or 3" PVC or CPVC Pipe)High temperature CPVC. (Recommended where air temperatures can reach 105 Degrees)Rated at 50 psi and an industry leading 180 GPM of flow.Check valve return spring designed to minimize head loss.Check valve design seals down to 15" water column (0.54 psi)Largest possible flow area for lower head loss.Manufacturers lifetime seal warranty.Tested and certified to NSF/ANSI 50.Tested and certified to IAPMO PS 87-95

  • Brand: Pentair
  • ASIN: B00DP5TTJU
  • UPC: 788379852269

True Union Swing Check Valve - 1 inch Slip x 1 inch Slip

True Union Swing Check Valve - 1 inch

1" check valve w/ slip unions

  • Brand: FLO NDS
  • ASIN: B001EUL6G2

Waterway Plastics 806105102744 Straight 1.5" Slip x 2" Spigot Swing Check Valve

Waterway Plastics 806105102744 Straight 1.5" Slip x 2"

Waterway Plastics is proud to design, engineer & produce our quality line of products right here in the USA, using only premium nsf approved materials & meeting all certifications & standards, at our 460,000 sq.'. Facility in Oxnard, ca. Waterway. Committed to innovation & excellence since 1973 part# 600-7030; straight 1.5" slip x 2" spigot swing Check valve 1 unit

  • Brand: Waterway Plastics
  • ASIN: B006H48KAK
  • UPC: 806105102744

Valterra 200-CU15 PVC Swing/Spring Combination Check Valve, Clear, 1-1/2" Union

Valterra 200-CU15 PVC Swing/Spring Combination Check Valve, Clear,

This Valterra 200-CU15 union check valve is made of clear schedule 40 PVC (polyvinyl chloride) for strength and resistance to corrosion and mild chemicals. Its EPDM (ethylene propylene diene monomer) seal resists degradation caused by water and oils, and the swing/spring construction of this valve makes it possible to install it in any position. It has a 1-1/2" slip connection at each end, which must be fastened with glue, a maximum pressure rating of 150 pounds per square inch (psi), and a spring tension of 1/2 lb. This check valve is suitable for use with landscape and irrigation, pool and spa, aquaculture, and general purpose applications.Check valves have two ports and restrict the flow of fluids and other loose materials through a pipe or passageway to one direction. Flow enters through one port and exits through the other, closing when flow reverses or stops. Two common types of check valves are ball cone valves and swing check valves. A ball cone valve utilizes a spring-loaded ball seated against a cone-shaped interior surface to stop the flow of fluid in a forward direction, and a swing check valve has a movable disc on a hinge to block reverse flow. Check valves are rated by their cracking pressure (the minimum upstream pressure required for the valve to operate), and th...

  • Color: Clear
  • Brand: Valterra
  • ASIN: B00B95UT9M
  • UPC: 019079703156

Jandy 7512 90-Degree, 2-Inch to 2-1/2-Inch Check Valve

Jandy 7512 90-Degree, 2-Inch to 2-1/2-Inch Check

90-Degree, 2-Inch to 2-1/2-Inch Check Valve

  • Brand: Jandy
  • ASIN: B001I7PJ3C
  • UPC: 052337003155
Similar Check Valve 2 Slip Results
Check Valve 2 Slip Video Results
           

Smart Swing Check Valve

Check Valve 2 Slip

Buy at: http://www.flexiblepvc.net/Swing_Check_Valve_Smart_Flow_Slip_x_Slip_p/check-valve-swing-sm-sxs.htm This PVC Schedule 40 Spring Check Valve will prevent back flow and keep prime in water systems. Slip connections on both ends. Do not install upside-down. Engineered for maximum flow, quic...

Tags: pvc pipe,pvc pipe fitings,schedule 40 fittings,...

Check Valves: Various Types & How To Install | How To Tuesday

Check Valve 2 Slip

http://brs.li/checkvalves In this video we'll cover the various types of check valves, how to use them, and provide some install tips. Check valves are designed to only allow water flow in one direction. They're commonly used on returns to prevent water from siphoning from the tank to the sump....

Tags: Check Valve (Product Category),Valve (Invention...

PVC Swing Check Check Valve

Check Valve 2 Slip

Buy at: http://www.flexiblepvc.net/Swing_Check_Valve_Full_Flow_Corrosion_Resistan_p/check-valve-swing-full-sxs-2.htm PVC Swing Check Check Valve - Full Flow - Corrosion Resistant (Slip x Slip) This PVC Schedule 40 Spring Check Valve will prevent back flow and keep prime in water systems. Use in ...

Tags: pvc pipe,pvc pipe fitings,schedule 40 fittings,...