Edelbrock 27034 INTAKE MANIFOLD

Edelbrock 27034 INTAKE

Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that's "tuned" for peak torque at 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 HP and 9 ft.-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft.-lbs. of torque for more performance where you need it most. Performer EPS manifold #2703 combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. #2703 has the same performance features as the Performer EPS #2701. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Also available with choice of four finishes. Will not fit under stock Corvette hood. ** Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500-650 cfm. Installation...

  • Brand: Edelbrock
  • ASIN: B001UQS68Q
  • UPC: 085347270347

Edelbrock 7501 INTAKE MANIFOLD

Edelbrock 7501 INTAKE

The Edelbrock Performer RPM Air-Gap Intake Manifold is manufactured from aluminum and given a natural finish. The exclusive Air-Gap design features an open space between the intake runners and the hot engine oil resulting in a cooler, denser charge and more power. The runners are tuned up to move the power band 1, 000 RPM higher than Performer Air-Gap manifolds, from idle-5, 500 RPM up to 1, 500-6, 500 RPM. It also features nitrous bosses, rear water outlets and two distributor clamp locations.

  • Brand: Edelbrock
  • ASIN: B000CN9164
  • UPC: 085347075010

Edelbrock 2701 Performer Intake Manifold

Edelbrock 2701 Performer Intake

The Edelbrock Performer Intake Manifold delivers superior performance with square-bore carburetors. Horsepower gains from idle to 5, 500 RPM, when used with Performer Series square-bore or Thunder Series AVS carburetors. Dyno tests show that the power gains an extra 5 horsepower, 9 foot / pounds and torque across the entire RPM range over their own performer manifolds.

  • Brand: Edelbrock
  • ASIN: B00063046Q
  • UPC: 085347027019

Professional Products 52001 Cyclone Satin Intake Manifold

Professional Products 52001 Cyclone Satin Intake

Direct Repl. For The Manifold On Non-EGR Eng. Great All Around Street Manifold. Includes Special Adapter Bushings And Plate.

  • Brand: Professional Products
  • ASIN: B001Q6GRGI
  • UPC: 665053520013

Edelbrock 27033 INTAKE MANIFOLD

Edelbrock 27033 INTAKE

Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors.

  • Brand: Edelbrock
  • ASIN: B004OSO4NI
  • UPC: 085347270330

Edelbrock 27014 INTAKE MANIFOLD

Edelbrock 27014 INTAKE

The Edelbrock Performer EPS Intake Manifold features a low-rise, dual plane design with patented runner tuning and a 180 degree firing order. This combination boosts torque over a wide RPM range from idle to 5, 500 RPM. They deliver improved throttle response over stock intake and come in non-EGR (Exhaust Gas Recirculation) style.

  • Brand: Edelbrock
  • ASIN: B000CN516I
  • UPC: 085347270149

Edelbrock 2101 INTAKE MANIFOLD

Edelbrock 2101 INTAKE

The Edelbrock Performer EGR (Electronic Gas Recirculation) Intake Manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. This patented design greatly improves torque over a wide RPM range for excellent throttle response, especially off-idle through the mid-range. The intake manifold directs the air or air-fuel mixture from the throttle body to the intake ports in the cylinder head. The flow typically proceeds from the throttle body into a chamber called the plenum, which in turn feeds individual tubes, called runners, leading to each intake port. It accepts late model water neck, air-conditioning, alternator and H. E. I. (Heat Energy Ignition).

  • Brand: Edelbrock
  • ASIN: B000182BA8
  • UPC: 085347021017

Assault Racing Products PC2021 Small Block Chevy Dual Plane High Rise Satin Aluminum Intake 1500-6500 RPM SBC

Assault Racing Products PC2021 Small Block Chevy Dual

This is a new satin aluminum dual plane intake for small block Chevy. 180° high rise design, big power over a wide RPM range. Ideal for everyday to high performance street applications, will produce power in the lower RPM range and not kill your bottom end like a single plane would. Intake works with 283-400 small blocks up to 1995. Includes special adapter bushings for the middle holes on the '87 to '95 heads. Does not fit the newer Vortec heads. For use with square bore style carbs. Provides standard bosses and tapped holes for street accessories, accepts late model wateneck, A/C and alternator brackets, and HEI. It also has a provision to add early style oil fill tube. Does not have provision for manual choke and are not EGR equipped. Will not fit under stock Corvette hood. These intakes are produced from steel molds to reduce core shift and have all the major features found on the expensive ones such as 4 corner water outlets, dual distributor holddowns, nitrous bosses, and the best part - the price! Manifold Specifications: Part Number: PC2021 RPM Range: 1500 - 6500 Intake Port Dimensions: 2.09" x 1.25" Manifold Height: 4.65" Features: Satin Finish 180° dual plane high rise design for outstanding power from 1500 to 6500 RPM Cast-in bosses on intake runners, can be drill...

  • Color: Satin
  • Brand: Assault Racing Products
  • ASIN: B00S75GOK0

Assault Racing Products PC2030 Small Block Chevy Single Plane High Rise Polished Aluminum Intake 3000-7500+ RPM SBC

Assault Racing Products PC2030 Small Block Chevy Single

This is a new polished aluminum high rise single plane intake for small block Chevy. Big power for mid to upper RPM ranges! Ideal for high performance and race applications. These intakes are produced from steel molds to reduce core shift, have all the major features found on the expensive ones such as 4 corner water outlets and nitrous bosses, and the best part - the price! Intake works with 283-400 small blocks up to 1995. Does not fit the newer Vortec heads. For use with square bore style carbs. Provides standard bosses and tapped holes for street accessories such as A/C and alternator brackets. No provision for manual choke or exhaust crossover. Not EGR equipped. Manifold Specifications: Part Number: PC2030 RPM Range: 3000 - 7500+ Intake Port Dimensions: 1.80" x 1.11"*1 Manifold Height: 6.06" NOTE (1) - port is intentionally left small to allow for porting/gasket matching Features: Polished Finish 360° single plane high rise design for outstanding power from 3000 to 7500+ RPM Cast-in bosses on intake runners, can be drilled and tapped for use with nitrous injectors Square bore carb bolt pattern for the Holley 4150/4160 style carburetor Ideal port position - allows custom porting for maximum power Dual distributor hold-down provisions for extra protection against distribut...

  • Color: Polished
  • Brand: Assault Racing Products
  • ASIN: B00S75GDZG

The Right Stuff Detailing IMF67ZZ '67 - '69 3/8 Thread, 1 3/8 Hose Connector (Z-28) - Intake Manifold Fitting

The Right Stuff Detailing IMF67ZZ '67 - '69

Intake manifold fittings screw into your factory intake manifold to distribute vacuum to various systems.

  • Brand: The Right Stuff Detailing
  • ASIN: B00KQWBS2G
  • UPC: 099998406956

Assault Racing Products PC2025 Small Block Chevy Dual Plane Air Gap Polished Aluminum Intake 1500-6500 RPM SBC

Assault Racing Products PC2025 Small Block Chevy Dual

In our opinion these are not $400.00 show quality polished intakes. Flaws in the polish such as scuffs and marks will require more polishing to enhance the finish. This is a new polished aluminum dual plane intake for small block Chevy. 180° high rise design, big power over a wide RPM range. Has the open air area under the carb pad to help keep fuel mixture cool and improve power. Ideal for everyday to high performance street applications, will produce power in the lower RPM range and not kill your bottom end like a single plane would. These intakes are produced from steel molds to reduce core shift, have all the major features found on the expensive ones such as 4 corner water outlets and nitrous bosses, and the best part - the price! Intake works with 283-400 small blocks up to 1995. Includes special adapter bushings for the middle holes on the '87 to '95 heads. Does not fit the newer Vortec heads. For use with square bore style carbs. Provides standard bosses and tapped holes for street accessories such as A/C and alternator brackets. No provision for manual choke or exhaust crossover and are not EGR equipped. Manifold Specifications: Part Number: PC2025 RPM Range: 1500 - 6500 Intake Port Dimensions: 2.09" x 1.25"*1 Manifold Height: 4.65" NOTE (1) - port is intentionally le...

  • Color: Polished
  • Brand: Assault Racing Products
  • ASIN: B00S75GKF4

Edelbrock 2703 INTAKE MANIFOLD

Edelbrock 2703 INTAKE

Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that's "tuned" for peak torque at 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 HP and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs. of torque for more performance where you need it most. Performer EPS manifold #2703 combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. #2703 has the same performance features as the Performer EPS #2701. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Also available with choice of four finishes. Will not fit under stock Corvette hood. ** Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500-650 cfm. Installation N...

  • Brand: Edelbrock
  • ASIN: B001UQO3NS
  • UPC: 085347027033

Weiand 8150 Sleath Intake Manifold

Weiand 8150 Sleath Intake

Weiand Stealth Intake Manifolds are designed to improve manifold efficiency and deliver maximum horsepower and torque. These manifolds feature high rise dual plane design with a square bore carburetor flange. They feature dual-plane manifolds which have high resistance to heat, salt and corrosion and improve drivability.

  • Brand: Weiand
  • ASIN: B000LUDG32
  • UPC: 090127621066

Eckler's Premier Quality Products 50-206461 - Chevelle Intake Manifold Vacuum Fitting, Power Brake Booster, Slip-On Port, With 1 Extra Vacuum Port

Eckler's Premier Quality Products 50-206461 - Chevelle Intake

Quality Reproduction Sliver Cad Plated 1/2" NPT Fitting Nice reproduction of the rear intake fitting with a non-threaded port for the power brake booster and one port for a vacuum source. The second port is usually used to connect to the modulator valve on an automatic transmission.

  • Brand: Premier Quality Products
  • ASIN: B01M0GAZHQ

SBC Chevy Fel Pro 1205 Intake Manifold Gasket 327 350 400 Performance (Stock/Small Race Port)

SBC Chevy Fel Pro 1205 Intake Manifold Gasket

This Listing is for a new pair of # P1205 intake gaskets as shown compatible with small block Chevy Fel-Pro BULK . Not skin packed. Gaskets Only! For '55-'00 262-400 engines. Famous Fel-Pro quality, great for stock to high performance rebuilds. Printoseal design with elastomer beads around the ports for extra sealing. Gaskets are .060" Thick and Port hole size 1.28" x 2.09" with no exhaust crossover.

  • Brand: Falcon Performance
  • ASIN: B01N29P51R

Eckler's Premier Quality Products 50-206460 - Chevelle Intake Manifold Vacuum Fitting, Power Brake Booster, Slip-On Port,

Eckler's Premier Quality Products 50-206460 - Chevelle Intake

Best Quality Reproduction Intake Fitting One Slip-on Port For Power Brake Booster Hose 1/2" NPT Thread Silver Cad Plated Works With Cast Iron & Aluminum Intakes Intake vacuum fittings can be a real bear to remove from your original intake. Over time the two different metals can almost weld themselves together making it impossible to remove from the cast iron intake. If you have an aluminum intake like Edelbrock, Weiand or Offenhauser in your Chevelle, the fitting can actually pull the threads out of your intake. Luckily, Eckler's Chevelle has this correct reproduction of the original intake fitting that will work with any intake with 1/2" NPT threads. Trust Ecklers for all your 1964, 1965 and 1966 Chevelle parts needs always at the best possible price.

  • Brand: Premier Quality Products
  • ASIN: B01M0G49AR

Mr. Gasket 6080 Super Intake Manifold Bolt

Mr. Gasket 6080 Super Intake Manifold

Mr. Gasket Super Intake Manifold Bolts have a smaller-than-standard hex head with a special under-head radius for added strength and a wide washer-faced head that spreads the clamping force evenly. Designed specifically for small-block Chevys, Chryslers, and AMCs, these durable 1.062-inch-long 3/8-16 bolts come with extra-thick heat-treated flat washers that deliver a more uniform torque and prevent galling on aluminum intake manifolds. They're heat-treated to Grade 5 specs, a perfect fit for tight spaces, have a protective black-oxide finish, and come in a set of 12.

  • Brand: Mr. Gasket
  • ASIN: B000BWCG3Q
  • UPC: 084041060803

Professional Products 52021 Satin Typhoon Intake Manifold for Small Block Chevy

Professional Products 52021 Satin Typhoon Intake Manifold for

These Professional Product Typhoon intake manifolds are powerful dual plane manifolds. For non-pollution controlled street machines, bracket racing, nitrous, or supercharged applications. They feature a square bore carburetor flange, nitrous bosses, 4-corner water ports, and dual distributor hold-downs.

  • Brand: Professional Products
  • ASIN: B001Q6LTH0
  • UPC: 665053520211

Scram Speed LSX106 GM LS1 LS6 Engine Intake Manifold Gasket Set

Scram Speed LSX106 GM LS1 LS6 Engine Intake

This is a set of new intake manifold gaskets for LSX engines. These are the perfect choice when swapping a 4.8/5.3/6.0/6.2 truck engine into your hot-rod and changing over to the car-style, FAST, or carbureted intake manifolds, or just refreshing the gaskets in your F-body or Corvette.Ê

  • Brand: Scram Speed
  • ASIN: B00GW9NLAO
  • UPC: 852670999418

Assault Racing Products PC2007 Small Block Chevy Dual Plane Vortec Satin Aluminum Intake Idle-5500 RPM SBC

Assault Racing Products PC2007 Small Block Chevy Dual

This is a new satin aluminum dual plane intake for small block Chevys with Vortec heads. 180° design for power over a wide RPM range. Ideal for everyday to moderate street performance applications, produces best power from idle to 5500 RPM. Designed to fit '96 and later engines and early motors with the Vortec head swap. These intakes are produced from steel molds to reduce core shift and are 100% pressure tested to insure leak free operation. They also have all the major features found on the expensive ones such as 4 corner water outlets, dual distributor hold downs, external water bypass provision, and the best part - the price! Intake works with small blocks with '96+ Vortec heads. Can use both spread bore carbs such as Rochester and also square bores such as Holley and Edelbrock. Includes adapter plate and gasket for the square bore style carbs. Provides standard bosses and tapped holes for street accessories such as A/C and alternator brackets. Works with HEI distributors. No provision for manual choke and are not EGR equipped. Manifold Specifications: Part Number: PC2007 RPM Range: Idle - 5500 Intake Port Dimensions: 2.06" x 1.18" Manifold Height: 4.25" Features: Satin Finish 180° dual plane design for outstanding power from idle to 5500 RPM For use with Vortec style h...

  • Color: Satin
  • Brand: Assault Racing Products
  • ASIN: B00S75GLRG
Similar Chevelle Intake Manifold Results
Chevelle Intake Manifold Video Results
           

Fab 1970 Chevelle SS. Alien Intake Manifold. Nelson Racing Engines. Tom Nelson. NRE TV.

Chevelle Intake Manifold

Take a ride in this fab Chevy Chevelle with Tom Nelson. The engine is unusually simple for NRE. The car is very quick. For more information go to http://NelsonRacingEngines.com. For help getting your dreams out for the World to see, go to http://VeritasMovieStudio.com.

Tags: Tom Nelson,nelson racing engines,nelson superca...

How to Install an Intake Manifold - Roadkill Extra

Chevelle Intake Manifold

It’s official: the “How to Build Your First Engine Series” is over! This is the final episode, as David Freiburger and Steve Dulcich wrap up their engine project for Roadkill Garage’s Vanishing Paint 1970 Dodge Challenger by installing the intake manifold and giving you plenty of advice as they g...

Tags: How to Build Your First Engine Series,engine pr...

1970 Chevelle Alien Intake 502 BBC Street Test with Tom Nelson. Nelson Racing Engines. NRE.

Chevelle Intake Manifold

This is a beautiful classic Chevelle. At only 610 HP this Chevelle knows how to move! NRE's Tom Nelson take on a great ride in this 42 year old middle age beauty. What is most unusual about this NRE video is the engine is largely stock. This engine does not break the bank. For more informati...

Tags: Tom Nelson,nelson racing engines,nre,nretv,nre ...