V-Twin 16-0115 - Clutch Hub Puller Tool with Swivel

V-Twin 16-0115 - Clutch Hub Puller Tool with

16-0115Clutch hub puller tool with swivel which fits over the clutch push rod so there is no need to remove the kick coverFits Models:FL 1941-1984FX 1971-1984Tech Note:Swivel style fits over clutch pushrod on 1970-1985 Big Twin so there is no need to remove the kick cover.

  • Brand: V-TWIN MANUFACTURING
  • ASIN: B00UMEC944

OTC 4800 Clutch Hub and Alternator Puller

OTC 4800 Clutch Hub and Alternator

Removes clutch on Big Twins with 3, 5, and 10 fingers. Also works on Sportster transmission sprocket and clutch. Pulls motor sprockets, alternator covers, and many general pulling applications.

  • Brand: OTC
  • ASIN: B009S4SZFG
  • UPC: 031113268551

Jims Clutch Hub Pullers 95960-52C

Jims Clutch Hub Pullers

Late style puller is bored to accept end of clutch pushrod eliminating removal of transmission end cover on vehicles equipped with late style throw out bearing

  • Brand: Jims USA
  • ASIN: B000GZQE2W

Jims Universal Clutch Hub Puller 1004A

Jims Universal Clutch Hub Puller

• Works with either 3, 5 or 10-finger clutch hubs• Also pulls the motor sprocket on Sportster and Big Twin• Works on Sportster transmission sprockets and Big Twin rotor assemblies

  • Brand: Jims USA
  • ASIN: B00D9H0P24

Jims Clutch Hub Puller Tool 1004A

Jims Clutch Hub Puller Tool

CLUTCH HUB PULLER

  • Brand: Jims Machining
  • ASIN: B000GTW7QU

PMD Products 23pc A/C Deluxe Automotive Compressor Clutch Hub Remover Installer Puller Tool w/Spanner Air Conditioner AC

PMD Products 23pc A/C Deluxe Automotive Compressor Clutch

Features: Compressor clutch removal tool for GM, Ford, Chrysler, Sanden, Nippondenso, DKS, and Zexel compressors. The kit will remove the clutch hub from all the compressor listed. The kit also contains all the necessary tools to reinstall a clutch hub back onto the compressor. The kit contains: Three eye round clutch plate arbor for Sanden, DKS, & Zexel 3 X 1/4" - 20 Hex screws 2 X 3/8" - 16 Hex Screws 3 X 5 mm - .8 Hex screws GM standard thread hub remover / installer GM metric thread hub remover / installer Chrysler, Nippondenso, & Ford course thread hub remover DKS hub puller Zexel hub puller Arbor installer bearings Molded carrying case. Suitable for following air conditioning compressor clutches: - Saden SD5, SD7, SD 505, 507, 510, 575, 708, 709 - Zexel (Mitsubishi) - Nippon Denso 6P, 10P - Chrysler C171 - Ford FS6 - Hitachi MJ - Tecumseh HR 980 - Delphi / Harrison (GM) R4, A6, HR-6, V5, DA6 Scope of delivery: - adjustable pin wrench - clutch friction plate puller - Puller plate (2/3 holes), with spindle and mounting screws - disassembly / assembly tool, SAE thread, ball bearings - disassembly / assembly tool, ISO thread, ball bearings

  • Brand: PMD Products
  • ASIN: B06XT4M8D2

PMD Products 18pc A/C Deluxe Automotive Compressor Clutch Hub Remover Installer Puller Tool Air Conditioner AC

PMD Products 18pc A/C Deluxe Automotive Compressor Clutch

Contents: Compressor clutch removal tool for GM, Ford, Chrysler, Sanden, Nippondenso, DKS, and Zexel compressors. The kit will remove the clutch hub from all the compressor listed. The kit also contains all the necessary tools to reinstall a clutch hub back onto the compressor. The kit contains: Three eye round clutch plate arbor for Sanden, DKS, & Zexel 3 X 1/4" - 20 Hex screws 2 X 3/8" - 16 Hex Screws 3 X 5 mm - .8 Hex screws GM standard thread hub remover / installer GM metric thread hub remover / installer Chrysler, Nippondenso, & Ford course thread hub remover DKS hub puller Zexel hub puller Arbor installer bearings Molded carrying case NO MANUAL OR INSTRUCTION.

  • Brand: PMD Products
  • ASIN: B01NCB0AEW

VIGORWORK A/C R134a R12 Compressor Clutch Hub Puller Kit Remover & Installer Repair Tool Set

VIGORWORK A/C R134a R12 Compressor Clutch Hub Puller

Year:2017 Item Width:15.5cm Special Features:Clutch Sucker Puller Kit External Testing Certification:CCC Country/Region of Manufacture:China Item Diameter:0inch Item Length:24cm Material Type:Metal Type:clutch puller Other application :Armature Plate Puller Fit for compressor :V5 compressor, Sanden SD-510, SD-508, SD-507, SD-709, 32c, 25c, 17c Description : Use for : V5 Compressor , Sanden SD-510, SD-508, SD-507, SD-709, 32c, 25c, 17c...etc

  • Brand: VIGORWORK
  • ASIN: B07JDQWXR3
  • UPC: 619988653728

V-Twin 16-0113 - Clutch Hub Puller Tool with Point End

V-Twin 16-0113 - Clutch Hub Puller Tool with

16-0113Clutch hub puller tool with point end which pulls clutch hubs

  • Brand: V-TWIN MANUFACTURING
  • ASIN: B008KKQGXW

FJC 2925 Compressor Clutch Hub Puller/Installer Tool Kit

FJC 2925 Compressor Clutch Hub Puller/Installer Tool

FJC Compressor Clutch Hub Puller/Installer Tool Kit. Use with GM, Ford, Chrysler and Imports. Compressor Guide Included. Molded Storage Case included.

  • Brand: FJC
  • ASIN: B0002JMEXU
  • UPC: 609989006067

ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler

ABN Air Compressor Clutch Rebuild Removal Tool Kit

If your vehicle's compressor or compressor clutch does not cool or cools poorly, is loud and noisy, or even seizes up, it is time to for a replacement. Sometimes the clutch assembly can be very difficult to remove from the compressor, but the ABN Air Compressor Clutch Rebuild Removal Tool Kit - AC Clutch Puller for Car Auto Air Conditioning GM, Ford, Chrysler cuts down on removal time on any R&R job. You can remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors, GM R4 and A6, HR-6, DA-6 and V A/C compressors, sander compressors SD 505, 507, 575, 708, and 709. Each piece is constructed from stainless steel with a black coated finish for strength and to resist rust and corrosion with proper care and lubrication. Pulley/clutch holder and 3-jaw puller not included. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Brand: ABN
  • ASIN: B078H29XDJ
  • UPC: 688295879916

MASTERCOOL MSC91000-A Deluxe Clutch Hub Puller/Installer Kit

MASTERCOOL MSC91000-A Deluxe Clutch Hub Puller/Installer

Kit contains a complete offering of A/C compressor clutch hub pullers and installers for GM, Ford, Chrysler and Imports Includes a compressor identification chart and comes in a custom molded case

  • Brand: MASTERCOOL
  • ASIN: B000YOMXF2
  • UPC: 700376103007

Jims Machining Clutch Hub Pullers

Jims Machining Clutch Hub

CLUTCH HUB PULLER JIMS

  • Brand: Jims Machining
  • ASIN: B000WK6IVI

V-Twin Manufacturing Clutch Hub Puller 16-0961

V-Twin Manufacturing Clutch Hub Puller

• For wet clutch type• Removes clutch hubs on late-model Big Twin models with diaphragm clutches

  • Brand: V-TWIN MANUFACTURING
  • ASIN: B00UMEC6W4

Dry Clutch Hub Puller for 1936-84 Special Tool

Dry Clutch Hub Puller for 1936-84 Special

Dry Clutch Hub Puller for 1936-84 Puller kit whose clutch hub of 4 speed transmission is removable Although this is protool, this reasonable tool can be used when replacing clutch hub by yourself

  • Brand: Vest-parts
  • ASIN: B014S9ZYT0

AC AIR CONDITION COMPRESSOR REPLACE CLUTCH HUB PULLER REMOVER / INSTALLER KIT

AC AIR CONDITION COMPRESSOR REPLACE CLUTCH HUB PULLER

AC AIR CONDITION COMPRESSOR REPLACE CLUTCH HUB PULLER REMOVER / INSTALLER KIT

  • ASIN: B00MP324Y0
  • UPC: 062130003092

Performance Tool W89325 Universal Hub and Drum Puller Universal Hub and Drum Puller

Performance Tool W89325 Universal Hub and Drum Puller

Performance Tool W89325 Universal Heavy Duty Wheel Hub Puller Rear Brake Drum Remover Removal Tool Puller frees frozen hubs, axle shafts, and other tough pulling applications. Adjustable sliding legs can be positioned anywhere on the center hub ring. Maximum bolt pattern 7-1/2" (190.2mm), also removes press-fit rear brake drums. Designed to be used on most model cars. Includes striking wrench and puller screw and three jaws. Makes wheel-hub removal quick, easy, damage free, and won't distort wheel lugs.

  • Brand: Performance Tool
  • ASIN: B01K8IKOU4
  • UPC: 039564011863

ATD Tools 3630 A/C Clutch Hub Puller Installer Kit

ATD Tools 3630 A/C Clutch Hub Puller Installer

Kit contains a complete offering of A/C compressor clutch hub pullers and installers for GM, Ford, Chrysler and Imports. Includes a compressor I.D. chart. Comes in a custom molded case.

  • Brand: ATD Tools
  • ASIN: B000OUZBP0
  • UPC: 663126036300

BRAND NEW OEM CLUTCH BRACKET FAN PULLEY HUB BEARING DODGE RAM NSK BD35-12DU8A

BRAND NEW OEM CLUTCH BRACKET FAN PULLEY HUB

BRAND NEW DODGE RAM OEM CLUTCH BRACKET FAN PULLEY HUB BEARING. COVERED BY 90 DAY MANUFACTURER'S WARRANTY. FITS THE FOLLOWING VEHICLES: 1989-2012 DODGE RAM 5.9L DIESEL. 1989-2012 DODGE RAM 6.7L DIESEL.

  • Brand: Generic
  • ASIN: B077NCGSQF
  • UPC: 713495132032

Laser - 5463 Clutch Hub Puller Triumph

Laser - 5463 Clutch Hub Puller

An essential tool for pulling the clutch hub front from its taper on the main shaft

  • Brand: Laser
  • ASIN: B00FZJO7ZK
Similar Clutch Hub Puller Results
Clutch Hub Puller Video Results
           

Harley Davidson Shovelhead Clutch removal with the Clutch Hub Tool

Clutch Hub Puller

In this quick video Grim Parts Co shows you how to use the Clutch Hub Tool to remove the clutch on your Shovelhead

Tags:

clutch hub and puller unboxing

Clutch Hub Puller

unboxing

Tags: unboxing,clutch hub,clutch hub puller

Custom Clutch Hub Puller for Rivera Primo Clutch

Clutch Hub Puller

With this custom made Clutch Hub Puller it was possible to remove the Rivera Primo Clutch for a Shovelhead 4-speed transmission axle. Visit our webshop at https://www.kolliesparts.nl/

Tags: Rivera Primo Clutch,shovelhead,clutch hub pulle...