CRL Duranodic Finish Stick-On Showcase Lock

CRL Duranodic Finish Stick-On Showcase

C.R. LAURENCE TDK7DU CRL Duranodic Bronze Stick-On Showcase Lock - Randomly Keyed. CRL Stick-On Track Locks help resist shoplifting. Peel and stick adhesive - easy-to-install - no holes to drill or special tools required. Locked doors cannot be separated or lifted out. Easy to operate - push in and turn key. Works with doors overlapping 3/4" to 2" (19 to 50.8 mm).. Part Numbers Variations: TDK7DU

  • Color: Duranodic Bronze
  • Brand: C.R. Laurence
  • ASIN: B000KZYNQ2

CRL Duranodic Bronze Finish Universal Push-Pull Paddle Handle - Pull to Right

CRL Duranodic Bronze Finish Universal Push-Pull Paddle Handle

The CRL Universal Push-Pull Handle comes with cartridges which allow it to be applied to push or pull, left or right handed doors. It fits dead latches with backsets from 7/8 to 1-1/2 inches (22 to 38 millimeters). Simple to follow instructions allow field reversal to meet your needs. Comes complete with cam plug, push and pull indicators, mounting screws, templates and directions. Measures approximately 5 x 4 inches (127 x 102 millimeters).

  • Color: Dark Bronze
  • Brand: CRL
  • ASIN: B00O8ZQUDE

CRL Duranodic Bronze Finish Aluminum No-Draft Speak-Thru

CRL Duranodic Bronze Finish Aluminum No-Draft

Easy to Install Eliminates Drafts Theft-Proof Locking Device CRL No-Draft Speak-Thrus are designed to allow audible transmission of voice requests at ticket windows, box offices and more. They prevent tampering from the outside, and stop drafts to the interior. The CRL 549 Series is made of brass. Each unit is individually boxed with gaskets and mounting screws for installation on glass up to 1/4 inch (6.4 millimeter) thick. For thicker glass up to 3-3/4 inch (95 millimeters), you can use the optional four inch (102 millimeter) screws Cat. No. 8324. CRL No-Draft Speak-Thrus require a minimum hole diameter of 2-1/4 inch (57 millimeters), and will cover holes up to 4-1/4 inch (108 millimeters). Recommended hole diameter is 3-1/2 inches (89 millimeters). Color: Duranodic Bronze Minimum Hole Diameter: 2-1/4 in (57 mm) Maximum Hole Diameter: 4-1/4 in (108 mm) Minimum Order: 1 Each

  • Brand: C.R. Laurence
  • ASIN: B000TDMGPA

CRL Duranodic Bronze Finish Right Hand Lever Handle

CRL Duranodic Bronze Finish Right Hand Lever

Field Reversible for Left or Right Hand Installations Fits DL2140 Series, Adams Rite, S. Parker, I.D.C., Global and Primeline Deadlatches The CRL Lever Handle is universal and is field reversible. The cam assembly will work with common industry narrow backset lock assemblies. A Heavy duty spring will return the lever automatically to full horizontal position. The escutcheon is 1-3/8 x 4 inches (35 x 102 millimeters), with a 1/4 inch (6 millimeter) square hardened spindle that interlocks in the cam plug (included). Color: Duranodic Bronze Minimum Order: 1 Each

  • Color: Bronze
  • Brand: C.R. Laurence
  • ASIN: B006JCLO26

CRL Duranodic Bronze Finish 2" x 2" Hollow Tube Extrusion - 10-1/2 ft Long

CRL Duranodic Bronze Finish 2" x 2" Hollow

Strong Enough for Structural Work Heavy Wall Tube This CRL Hollow Tube Extrusion is available in two finishes and is a multi-purpose extrusion used as mullions, stiffeners, and for custom fabrications. Each 10 foot 6 inch (3.20 meters) length comes individually wrapped in it's own heavy duty cardboard shipping tube for protection. Color: Duranodic Bronze Length: 10 ft 6 in (3.20 m) Thickness: .125 in (3.2 mm) Minimum Order: 1 Stock Lengths (10.5 ft)

  • Brand: C.R. Laurence
  • ASIN: B003IJHUMG

CRL Bronze Duranodic Finish Roton Concealed Leaf Heavy-Duty 83" Hinge With Lip 1-3/4 Inch Entry Door

CRL Bronze Duranodic Finish Roton Concealed Leaf Heavy-Duty

C.R. LAURENCE 224HD83DU CRL Dark Bronze Anodized 83" Roton 224HD Series Concealed Leaf Heavy-Duty Hinge With Lip for 1-3/4" Entry Door. CRL Concealed Leaf with Lip for 1-3/4" Entry Door Roton Hinges are made of high strength aluminum with a full length rolling gear profile to align doors perfectly from top to bottom. Special self-lubricating polyacetal load bearing blocks deliver smooth, almost floating operation on even the heaviest doors. Hinges are completely secure because all mounting hardware is hidden when installed. Hinges are easy-to-install and come with instructions and all necessary hardware for mounting. Available in clear satin anodized or dark bronze duranodic finishes. These Standard Duty Hinges are stocked in lengths of 83" (2.1 m) and 95" (2.4 m).. Part Numbers Variations: 224HD83DU

  • Color: Dark Bronze
  • Brand: C.R. Laurence
  • ASIN: B000WNJVOQ

CRL Duranodic Bronze Finish Universal Push-Pull Paddle Handle
Push to Left

CRL Duranodic Bronze Finish Universal Push-Pull Paddle Handle
Push

C.R. LAURENCE DL2162DU CRL Bronze Universal Push-Pull Paddle Handle - Push to Left. The CRL Universal Push-Pull Paddle comes with cartridges which allow it to be applied to push or pull, left or right handed doors. It fits deadlatches with backsets from 7/8" (22.2 mm) to 1-1/2" (38.1 mm). Simple to follow instructions allow field reversal to meet your needs. Comes complete with cam plug, push and pull indicators, mounting screws, templates and directions. Measures approximately 5" x 4" (127 x 102 mm). Buying the paddle to meet your specifications from the chart below eliminates disassembling and reassembling internal parts. One per package.. Part Numbers Variations: DL2162DU

  • Brand: C.R. Laurence
  • ASIN: B0012IXOMK

CRL Duranodic Bronze Stick-On Showcase Lock - Keyed Alike by CR Laurence

CRL Duranodic Bronze Stick-On Showcase Lock - Keyed

Stick-On Showcase Lock

  • Color: bronze
  • Brand: CR Laurence
  • ASIN: B006JCPG4S

CRL Duranodic Bronze Finish Extruded Aluminum Pull Handle

CRL Duranodic Bronze Finish Extruded Aluminum Pull

10" (254 mm) Center-to-Center Concealed Fasteners The CRL Extruded Aluminum Pull Handle comes with two studs that are tapped (1/4-20 thread) into the aluminum door frame on 10 inch (254 millimeter) centers. Then the handle is slipped over the studs and secured with Allen set screws to provide concealed fastener look. For wood or metal door mounting, an optional DL916 Backing Plate is available in matching Satin Anodized or Duranodic Bronze finishes. Color: Duranodic Bronze Center-to-Center: 10 in (254 mm) Minimum Order: 1 Each

  • Color: Dark Bronze
  • Brand: C.R. Laurence
  • ASIN: B0012J1408

CRL D623DU Duranodic Bronze 1/4" Single Channel with 1" High Wall

CRL D623DU Duranodic Bronze 1/4" Single Channel with

CRL Universal Framing Extrusions may be used for framing smaller hinged glass doors for showcases, cork board displays, and shadow box frames. Glaze with CRL Vinyl is available. Uses Cat. No. D662WS Corner and Screws, sold separately. SPECIFICATIONS:Material: 6063-T5 Aluminum AlloyThickness: .060" (1.52 mm) Stock Length: 12' (3.66 m)Typical Uses: Glass edge protection; fabricate hinged doors or small windows.

  • Color: Duranodic Bronze
  • Brand: CR Laurence
  • ASIN: B006JCODVU

CRL Duranodic Finish End Cap for LK610 H-Bar

CRL Duranodic Finish End Cap for LK610

Provides Finished Appearance to Track Available in Several Finishes This CRL End Cap for LK610 H-Bar is used to cover cut ends of LK 610 H-Bar in Sliding Aluminum Track Assemblies. It really finishes off your installation with a neat appearance. Fasten to cross member of H-Bar with a rivet or flat head screw. Color: Duranodic Finish Minimum Order: 1 Each

  • Color: Duranodic Bronze
  • Brand: C.R. Laurence
  • ASIN: B000WO4564

CRL Duranodic Bronze "T" Bar Aluminum Channel - 12 ft Long

CRL Duranodic Bronze "T" Bar Aluminum Channel -

C.R. LAURENCE D608DU CRL Dark Bronze T- Bar Aluminum Channel. This CRL T-Bar Channel is a universal channel used as a divider or an upper or lower channel for sliding track assemblies..

  • Color: Dark Bronze
  • Brand: C.R. Laurence
  • ASIN: B003IJOUYW

CRL Duranodic Bronze Finish Roton Concealed Leaf 83" Hinge With Lip For 1-3/4" Entry Door

CRL Duranodic Bronze Finish Roton Concealed Leaf 83"

C.R. LAURENCE 22483DU CRL Dark Bronze Anodized 83" Roton 224 Series Concealed Leaf Hinge with Lip for 1-3/4" Entry Door. CRL Concealed Leaf with Lip for 1-3/4" Entry Door Roton Hinges are made of high strength aluminum with a full length rolling gear profile to align doors perfectly from top to bottom. Special self-lubricating polyacetal load bearing blocks deliver smooth, almost floating operation on even the heaviest doors. Hinges are completely secure because all mounting hardware is hidden when installed. Hinges are easy-to-install and come with instructions and all necessary hardware for mounting. Available in clear satin anodized or dark bronze duranodic finishes. These Standard Duty Hinges are stocked in lengths of 83" (2.1 m) and 95" (2.4 m)..

  • Color: Dark Bronze
  • Brand: C.R. Laurence
  • ASIN: B000WNPHC6

CRL Duranodic Bronze Finish Universal Storefront Door Hinges - Set

CRL Duranodic Bronze Finish Universal Storefront Door Hinges

This CRL Universal Hinge Replacement Kit is machined to the close tolerances required for heavy, continuously used commercial doors. The universal fit allows replacement of all storefront hinges without modification on both flush and 1/8" (3 mm) recessed doors. These cure, non-exposed hinge pins cannot be reached, removed or tampered with. The door weight is supported by a case hardened, self-lubricating pin and machine quality anti-friction roller with thrust bearings sealed in oil.

  • ASIN: B001G0T8PG

CRL Duranodic Bronze Finish Universal Storefront Door Hinges - Set by C.R. Laurence

CRL Duranodic Bronze Finish Universal Storefront Door Hinges

Universal Fit for Both Flush and 1/8 (3 mm) Recessed Doors;Use for Doors Weighing Up to 300 Lbs. (136 kg);Instant Adjustments to Fine Tolerances;Smooth Bearing Action;Self-Lubricating Pin

  • Brand: C.R. Laurence
  • ASIN: B01M1F6Y66
  • UPC: 767654533093

CRL Duranodic Bronze Finish Left Hand Lever Handle

CRL Duranodic Bronze Finish Left Hand Lever

Field Reversible for Left or Right Hand Installations Fits DL2140 Series, Adams Rite, S. Parker, I.D.C., Global and Primeline Deadlatches The CRL Lever Handle is universal and is field reversible. The cam assembly will work with common industry narrow backset lock assemblies. A Heavy duty spring will return the lever automatically to full horizontal position. The escutcheon is 1-3/8 x 4 inches (35 x 102 millimeters), with a 1/4 inch (6 millimeter) square hardened spindle that interlocks in the cam plug (included). Color: Duranodic Bronze Minimum Order: 1 Each

  • Color: Bronze
  • Brand: C.R. Laurence
  • ASIN: B01GWETVL6

CRL Duranodic Bronze Finish Aluminum Extrusion for Showcase Finger Pull with 7/16" Lip - 12 ft Long

CRL Duranodic Bronze Finish Aluminum Extrusion for Showcase

Easy To Install Available Cut To Size Or Order Full 12' (3.66 m) Length Extrusion CRL Extruded Aluminum Finger Pulls are designed for 1/4 inch (6 millimeter) doors. Color: Duranodic Bronze Extrusion Length: 12 ft (3.66 m) Minimum Order: 1 Stock Lengths (12 ft)

  • Color: Dark Bronze
  • Brand: C.R. Laurence
  • ASIN: B003IJLB2G

CRL Duranodic Bronze Finish Video/DVD Drop Chute, Bracket and Mail Slot

CRL Duranodic Bronze Finish Video/DVD Drop Chute, Bracket

  • ASIN: B003GX0TGS

CRL Duranodic Bronze Finish Parallel Arm Bracket

CRL Duranodic Bronze Finish Parallel Arm

C.R. LAURENCE PR4050PABDU CRL Dark Bronze Parallel Arm Bracket. This CRL Parallel Arm Bracket is used with Parallel Arm applications for our PR40, PR50 Surface Mount Door Closers when used with a the non hold-open regular arm.. Part Numbers Variations: PR4050PABDU

  • Brand: C.R. Laurence
  • ASIN: B001G1GGV4

CRL Duranodic Bronze Finish Parallel Hold Open Arm Bracket

CRL Duranodic Bronze Finish Parallel Hold Open Arm

Parallel Arm Bracket for use with Hold Open Arms For Use with PR40, PR50 and PR90 Surface Mount Door Closers This CRL Parallel Arm Bracket is used with Parallel Arm Hold Open applications for our PR40, PR50 and PR90 Surface Mount Door Closers when used with either PR4050HOA or PR90HOA Hold Open Arms. Color: Duranodic Bronze

  • Color: bronze
  • Brand: C.R. Laurence
  • ASIN: B001G19PIU
Similar Crl Duranodic Bronze Finish Results
Crl Duranodic Bronze Finish Video Results
           

Pemko SA Surface Mounted Automatic Door Bottom

Crl Duranodic Bronze Finish

To place an order on one of these four products or for more information on each of them visit our website at: http://absupply.net/pemko-sa1-28-mill-finish-aluminum-automatic-door-bottom-16725.aspx http://absupply.net/pemko-sa2-32-mill-finish-aluminum-automatic-door-bottom-16727.aspx http://absupp...

Tags: webcam video absupplynet,Pemko,Automatic Door B...

Trans-Atlantico GH-6015-AL 8" Heavy Duty Step On Door Holder - Aluminum Finish

Crl Duranodic Bronze Finish

Please find this product at http://absupply.net/searchfast.aspx?videoid=ea4sdGwi2Fo This video is to bring you a closer look at the Trans-Atlantico GH-6015-AL 8" Heavy Duty Step On Door Holder - Aluminum Finish. Very nice substantial piece of hardware. This is your lever to release it push down....

Tags: Trans-Atlantico,Absupply,Architectural,Builders...

Dorbin 241DP Dark Brown Anodized Aluminum Door Sweep with Nylon Brush

Crl Duranodic Bronze Finish

Please find this product at http://absupply.net. This video is to bring you a closer look at the Dorbin 241DP Dark Brown Anodized Aluminum Door Sweep with Nylon Brush. 241 represents the profile of this door sweep. The 'D' stands for the dark bronze anodized. The 'P' stands for the nylon bristle....

Tags: absupply,net,architectural,builders,supply,dorb...