CRL Satin Anodized Series 3606 Lower Track for Sliding Screen Doors - 12 ft long

CRL Satin Anodized Series 3606 Lower Track for

C.R. LAURENCE 3606A CRL Satin Anodized Series 3606 Lower Track - 144". Repair worn or corroded screen surrounds with CRL Aluminum Extrusions for Sliding Screen Door Openings. All four profiles come in three popular finishes to complement most sliding screen doors..

  • Color: Satin Anodized
  • Brand: C.R. Laurence
  • ASIN: B00269X7YE

CRL Aluminum Sliding Screen Door Rail - 72 in long

CRL Aluminum Sliding Screen Door Rail - 72

There is no need to replace a complete threshold when only the screen door rail is damaged.CRL Screen Door Rails install quickly with rivets, screws or sealants. The rail is 15/16 inch (23.8 millimeter) wide and 5/16 inch (7.9 millimeter) tall at the top of the rail. We recommend using M66GRY or 777GRY for this application. Sliding Glass Rails, Sill Track Cover, Threshold Replacement Kits and OEM Replacement Thresholds are also available.

  • Color: Aluminum
  • Brand: C.R. Laurence
  • ASIN: B001G19A3A
  • UPC: 060829971257

CRL 8' Stainless Steel Large Patio Door Sill Cover 6702A8

CRL 8' Stainless Steel Large Patio Door Sill

8' (2.4 m). Repairs Damaged or Corroded Patio Door Rails. Makes Doors Work as Good as New. Easy-to-Install Available in Lengths From 8' to 10' (2.4 to 3.0 m). Repair damaged or corroded patio door rails with easy-to-install CRL Sill Cover. Simply remove the door, place sill cover over rail, and then re-install the door. Stainless Steel Sill Cover allows patio doors to roll smoothly and quietly again. Available in two sizes that fit just about any patio door rail.NOTE: If existing track is extra small or worn you may want to apply a couple of inches of silicone into track cover at each end to prevent cover from lifting up at ends. Or by crimping the ends only with vise grip after installation will help cover stay on.

  • Brand: C.R. Laurence
  • ASIN: B00QL56SM2
  • UPC: 060829618619

CRL Sliding Screen Door Bottom Roller 1" Steel Wheel for Metal Industries - Package

CRL Sliding Screen Door Bottom Roller 1" Steel

C.R. LAURENCE B665 CRL 1" Stainless Steel Ball Bearing Center Groove Sliding Screen Door Roller with Top Adjustment Screw for Metal Industry. This CRL Bottom Roller has a stainless steel housing with a 1" (25.4 mm) steel ball bearing center groove roller. The roller assembly is spring loaded and has an adjusting screw. Fits on doors made by Metal Industries. Two complete roller assemblies per package.. Part Numbers Variations: B665

  • Brand: C.R. Laurence
  • ASIN: B000KZRGLG
  • UPC: 060829122048

CRL KDEX2036W White 36" x 81" Heavy-Duty Extruded K.D. Sliding Screen Door Kit - 2" Frame

CRL KDEX2036W White 36" x 81" Heavy-Duty Extruded

This CRL K.D. Sliding Screen Door Kit has 2" (51 mm) wide extruded door frame members with a .043" (1.1 mm) wall thickness. This kit comes with pre-mitered top and bottom rails with the roller and corner pre-installed. The width of this door cannot be changed. Kit comes complete with 1-3/8" (35.2 mm) diameter steel ball bearing rollers which attach quickly to the glass filled nylon corners. The roller adjustment screw is hidden on the edge of the door. Door supplied with a universal style plastic pull handle with a steel latch hook which locks into the included diecast keeper. A vinyl bug strip is provided. The recommended retainer spline size is .135", and you can use either vinyl or foam core type spline to secure the screen mesh (not included). Important Notes: This new kit has top and bottom rails 1/2" (12.7 mm) longer than the standard door width (a 36" door will measure 36-1/2" wide). Also, the door roller slot has been widened to be adjusted from 36-1/2" to 35-1/2". It is important to remember that both ends of the door rails should be cut no more than 1/2".

  • Color: White
  • Brand: CR Laurence
  • ASIN: B0158U0C9U

C.R. LAURENCE B645 CRL 1" Nylon Sliding Screen Door Bottom Roller for Peachtree Doors

C.R. LAURENCE B645 CRL 1" Nylon Sliding Screen

Used by PeachTree Doors The CRL Bottom Roller assembly has a 7/16 inch (11.1 millimeter) wide nylon housing with a one inch (25.4 millimeter) O.D., center grooved nylon wheel. The roller is used on Peachtree doors. Minimum Order: 1 Package Two roller assemblies with installation screws per package.

  • Brand: C.R. Laurence
  • ASIN: B000KZRGGQ
  • UPC: 060829122185

CRL Brite Bronze Aluminum Single Bottom Rail

CRL Brite Bronze Aluminum Single Bottom

This CRL Single Bottom Rail is used with Lower Channels to act as a rail for sliding panels. Removes from channel for easy cleaning. CRL Aluminum Extrusions and Accessories allow you to customize track assemblies to your individual needs. Made from the highest quality, No. 6063 alloy - T-5 aluminum, our extrusions are uniformly anodized. Anodizing is the process of electronically adding a thicker coat of oxidizing to aluminum, which protects the metal from scratches, blemishes and atmosphere. The standard finish is commercial satin anodized, but it is also available in commercial 145 gold, duranodic 312 bronze, black, brite and brite gold finishes. Commonly used with our D603 series channel.SPECIFICATIONS:Material: 6063-T5 Aluminum AlloyThickness: .059 (1.50 mm)Stock Length: 12' (3.66 m)Typical Uses: Acts as a Rail for Sliding Panels.

  • Brand: CR Laurence
  • ASIN: B006JFM7OW

CRL Sliding Screen Door Bottom Roller 1" Nylon Wheel for CRL and Columbia Doors - Package

CRL Sliding Screen Door Bottom Roller 1" Nylon

Replacement Roller for KD134 Series Screen Doors Used on Columbia Screen Doors Thin 5/16" Width Housing This Sliding Screen Door Bottom Roller has a nylon housing with an adjustable nylon yoke. This roller is used on the CRL KD134 Series KD Screen Door Kits. The 5/16 inch (7.9 millimeter) housing is thinner than the housing on B646 Roller, which is also used on other Columbia screen doors. Minimum Order: 1 Package Two rollers per package.

  • Brand: C.R. Laurence
  • ASIN: B000KZV7V6
  • UPC: 060829122178

CRL 1/2" Wide Sliding Shower Door Bottom Guide

CRL 1/2" Wide Sliding Shower Door Bottom

1-3/16" (30.2 mm) Long Guide CRL 1/2" Wide Sliding Shower Door Bottom Guide is 7/8 inch (22.2 millimeters) tall for sliding shower doors. Minimum Order: 1 Package (Comes one per pack.)

  • Brand: CRL
  • ASIN: B001G188CO

CRL Sliding Screen Door Bottom Roller 1" Steel B.B. Wheel - Package

CRL Sliding Screen Door Bottom Roller 1" Steel

C.R. LAURENCE B679 CRL 1" Steel Ball Bearing Sliding Screen Door Bottom Roller . This CRL Bottom Roller has a 5/16" (7.9 mm) wide aluminum housing with a spring activated aluminum yoke. The center grooved steel ball bearing roller is a 1/4" (6.4 mm) wide. There is one roller per package. One roller per package.. Part Numbers Variations: B679

  • Brand: C.R. Laurence
  • ASIN: B006JFIXVS
  • UPC: 060829122123
Similar Crl Sliding Screen Door Bottom Results
Crl Sliding Screen Door Bottom Video Results
           

How to Install a Retractable Screen Door

Crl Sliding Screen Door Bottom

This week I teamed up with my friends at Zabitat.com to show you how you can easily add a retractable screen door to just about any doorway. This is a simple project you can knock out in about 30 minutes with minimal tools. Visit http://www.zabitat.com and Use the Promo Code MRFIXIT10 for $10 o...

Tags: DIY,How to,Do it yourself,Do-it-yourself,repair...

How to install single retractable fly screen doors tutorial for flyscreen

Crl Sliding Screen Door Bottom

Step by step installation of the single retractable fly screen doors by ezy screens

Tags: Door,retractable screens,screens,open,house,fly...

Sliding Screen Door Re-Screening

Crl Sliding Screen Door Bottom

In this video we show you how to re-screen your damaged sliding screen door using only very basic hand tools. Without the use of a large table it's a little more difficult, but as you'll see, it can be done. Window And Screen Repair Tables, Spline, Tools, Frame, Corners, Etc. http://www.primel...

Tags: screen,door,sliding,primeline,repair,DIY,howto,...