CURT 55151 Powered Converter Wiring Kit

CURT 55151 Powered Converter Wiring

When your vehicle does not readily provide an electrical connection for hooking up your trailer, CURT electrical converts offer the solution. Working tail lights on your trailer are absolutely essential any time you tow, and a converter provides an effective way to properly equip your vehicle for safe towing. A CURT electrical converter, much like our custom vehicle-to-trailer wiring harnesses, provides a trailer connector on your vehicle by slicing into the vehicle's electrical system. Electrical converters are designed to splice directly into the taillight wiring, rather than plugging into various sockets, giving them the nickname "taillight converters". Though it requires a little extra work compared to a custom wiring harness, a tail light converter offers a reliable, long-term connector solution.This converter wiring kit is intended to be used with various CURT powered taillight converters. Powered converters require a direct connection to the vehicle's battery, and the powered converter wiring kit #55151 provides all of the components needed to establish a secure connection. The kit includes 20 feet of 12 gauge wire, a 10-amp fuse, an in-line fuse holder, a 3/8" ring terminal, a butt connector, a 14 1/2" cable tie and eight 6" cable ties. This wiring kit is rated at 10 amps...

  • Brand: Curt Manufacturing
  • ASIN: B000K2NH3U
  • UPC: 612314551514

CURT 55664 Custom Wiring Connector

CURT 55664 Custom Wiring

A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring.Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT's custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle's electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided.This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM connector and offers a 4-way flat and 6-way round connector. It also comes with a mounting bracket for easy installation. CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your c...

  • Brand: Curt Manufacturing
  • ASIN: B001EP290O
  • UPC: 612314556649

CURT 56146 Powered 3-to-2-Wire Taillight Converter

CURT 56146 Powered 3-to-2-Wire Taillight

When your vehicle does not readily provide an electrical connection for hooking up your trailer, CURT electrical converts offer the solution. Working tail lights on your trailer are absolutely essential any time you tow, and a converter provides an effective way to properly equip your vehicle for safe towing. A CURT electrical converter, much like our custom vehicle-to-trailer wiring harnesses, provides a trailer connector on your vehicle by slicing into the vehicle's electrical system. Electrical converters are designed to splice directly into the taillight wiring, rather than plugging into various sockets, giving them the nickname "taillight converters". Though it requires a little extra work compared to a custom wiring harness, a tail light converter offers a reliable, long-term connector solution.This CURT electrical converter is designed to convert a 3-wire system to a 2-wire system and provides a standard 4-way flat connector socket to plug in your trailer. It is designed to fit certain models of Acura, Audi, BMW, Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, Freightliner, Honda, Infiniti, Jaguar, Kia, Land Rover, Lexus, Lincoln, Mazda, Mercedes, Mercury, MINI, Nissan, Pontiac, Porsche, Saab, Saturn, Scion, Sterling, Subaru, Toyota, Volkswagen and Volvo (to verify your...

  • Brand: Curt Manufacturing
  • ASIN: B003AT4RHK
  • UPC: 612314561469

CURT 55515 Custom Wiring Connector

CURT 55515 Custom Wiring

A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring.Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT's custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle's electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided.This custom wiring connector provides a 4-way flat connector socket and is designed to be a custom wiring option for certain models of Buick, Cadillac, Chevrolet, Dodge, Ford, GMC, Hummer, Infiniti, Jeep, Nissan, Ram and Saturn (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). CURT custom wiring connectors are designed to be long-last...

  • Brand: Curt Manufacturing
  • ASIN: B000KAZXHU
  • UPC: 612314555154

Curt Manufacturing CURT 11326 Class 1 Trailer Hitch

Curt Manufacturing CURT 11326 Class 1 Trailer

CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc).Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the Saab 9-3 sedan with single exhaust or convertible with single exhaust (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with a hitch pin and clip and all necessary installation h...

  • Brand: Curt Manufacturing
  • ASIN: B003PIQ7KG
  • UPC: 612314011766

CURT 55774 Custom Wiring Connector

CURT 55774 Custom Wiring

A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring.Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT's custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle's electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided.This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM connector and offers a 4-way flat and 7-way round connector. It comes with a mounting bracket for easy installation and is designed to be a custom wiring option for certain models of Buick, Cadillac, Chevrolet, Ford, GMC, Hummer, Infiniti, Isuzu, L...

  • Brand: Curt Manufacturing
  • ASIN: B001EOV474
  • UPC: 782645189660

Curt Manufacturing CURT 113183 Custom Class 1 Trailer Hitch with Ball Mount (1-1/4" Receiver)

Curt Manufacturing CURT 113183 Custom Class 1 Trailer

CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc).Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Saab 9-2X, Subaru Impreza coupe, sedan or wagon, Subaru Outback sport or Subaru WRX (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes w...

  • Color: Black
  • Brand: Curt Manufacturing
  • ASIN: B000A137U4
  • UPC: 612314113187

Curt Manufacturing CURT 11318 Class 1 Trailer Hitch

Curt Manufacturing CURT 11318 Class 1 Trailer

CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc).Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the Saab 9-2X, Subaru Impreza coupe, sedan or wagon, Subaru Outback sport or Subaru WRX (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with a hitch pin and clip and all necessary ...

  • Brand: Curt Manufacturing
  • ASIN: B003PIQ3BO
  • UPC: 612314011704

CURT 59146 Powered 3-to-2-Wire Taillight Converter

CURT 59146 Powered 3-to-2-Wire Taillight

When your vehicle does not readily provide an electrical connection for hooking up your trailer, CURT electrical converts offer the solution. Working tail lights on your trailer are absolutely essential any time you tow, and a converter provides an effective way to properly equip your vehicle for safe towing. A CURT electrical converter, much like our custom vehicle-to-trailer wiring harnesses, provides a trailer connector on your vehicle by slicing into the vehicle's electrical system. Electrical converters are designed to splice directly into the taillight wiring, rather than plugging into various sockets, giving them the nickname "taillight converters". Though it requires a little extra work compared to a custom wiring harness, a tail light converter offers a reliable, long-term connector solution.This CURT electrical converter is designed to convert a 3-wire system to a 2-wire system and provides a standard 4-way flat connector socket to plug in your trailer. This converter is made with cutting-edge surface-mount technology (SMT) circuitry, featuring electrical components that are mounted directly to the surface of the board rather than being inserted into a series of holes. SMT circuits have longer life cycles, lower resistance, reduced heat generation and are more reliable ...

  • Brand: Curt Manufacturing
  • ASIN: B00537GKBI
  • UPC: 612314591466

Topline Autopart 50" Universal Blk Mesh Steel Foldable Fold Up Folding Rear Bumper Mount Trailer Hitch Luggage Cargo Carrier Rack Hauler Tray Kit For 2"/Class 3 III Receiver Tube A1

Topline Autopart 50" Universal Blk Mesh Steel Foldable

100% Brand New In Stock, Item Exactly As The Picture ShownComes Opening That Accepts Receivers, Or Other Mounted AccessoriesGive You Additional Storage & FlexibilityConvenient & Useful For Anywhere You GoCan Be Use To Carry / Transport Luggage, Cargo & Camping Gear etc/li>Solid All-Welded Design & Construction For Maximum Strength & Safety/li>Able To Withstand Road Abuse & Heavy Duty Towing Purposes To It's Specified Capacities/li>Professional Installation Is Always Highly Recommended/li>Please Go Check Out Our Ebay Store For More Additional Hot Items/li>

  • Color: Black
  • Brand: Topline_autopart
  • ASIN: B071H23124

Curt Manufacturing CURT 11140 Class 1 Trailer Hitch

Curt Manufacturing CURT 11140 Class 1 Trailer

CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc).Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the Saab 9-3 Sport Combi wagon with dual exhaust (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It comes with a hitch pin and clip and all necessary installation hardware.Each CURT class 1 hitch is co-cured with a liquid ...

  • Brand: Curt Manufacturing
  • ASIN: B00537FPWI
  • UPC: 612314030200

Curt Manufacturing CURT 113262 Class 1 Trailer Hitch with Ball Mount

Curt Manufacturing CURT 113262 Class 1 Trailer Hitch

CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc).Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Saab 9-3 sedan with single exhaust or convertible with single exhaust (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with a hitch pi...

  • Brand: Curt Manufacturing
  • ASIN: B003PIUHH0
  • UPC: 612314020737

Curt Manufacturing 55416 Blade Socket (Heavy-Duty Replacement OEM 7-Way RV), 1 Pack

Curt Manufacturing 55416 Blade Socket (Heavy-Duty Replacement OEM

Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer's electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way RV blade connector is designed to plug into a USCAR socket and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It is intended to be a replacement trailer connector for specific Ford, GM and Nissan vehicles. It features rust-free black plastic construction and comes with a spring-loaded cover to keep out dust and water. This 7-way RV blade connector is a female-end socket, specifically designed for the vehicle side of the connection.

  • Color: Black
  • Brand: Curt Manufacturing
  • ASIN: B075ZZJSW6
  • UPC: 612314554164

CURT 118313 Custom Class 1 Trailer Hitch with Ball Mount (1-1/4" Receiver)

CURT 118313 Custom Class 1 Trailer Hitch with

CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,500 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc).Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Saab 9-5 sedan or wagon (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with a hitch pin and clip and all necessary installation hard...

  • Color: Black
  • Brand: Curt Manufacturing
  • ASIN: B0033WNI4C
  • UPC: 612314118311

Curt Manufacturing CURT 11831 Class 1 Trailer Hitch

Curt Manufacturing CURT 11831 Class 1 Trailer

CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 2,500 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc).Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the Saab 9-5 sedan or wagon (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with a hitch pin and clip and all necessary installation hardware.Each CURT class 1 hitch is co-cured wi...

  • Brand: Curt Manufacturing
  • ASIN: B003PJIRZS
  • UPC: 612314013302

Curt Manufacturing CURT 117033 45910 Replacement Adjustable Channel Mount Shank

Curt Manufacturing CURT 117033 45910 Replacement Adjustable Channel

If you own multiple trailers or frequently tow a variety of loads, you know how much time and money are spent tailoring your towing system to each and every individual trailer. There is nothing more inconvenient than switching back and forth between a few different ball mounts and trying to remember which mount fits with which trailer. A CURT adjustable ball mount is your multipurpose towing solution. Its key feature is its adjustable design that takes the form of an adjustable channel-style assembly. It uses a series of holes to allow the ball mount platform to be vertically adjusted and allow for significant flexibility in drop and rise. With a variable ball height, it can easily accommodate different coupler heights and multiple trailers. This adjustable channel-style replacement shank is rated for 14,000 lbs. GTW and features a solid shank, multiple mounting holes and can accept a variety of channel-mount attachments. It features nine holes with a total height of 9 3/4", and it fits part #45900, #45919 and #45920 (Note: Always abide by the lowest rated towing component). It can accept pins and clips #45915 or a lock set #23556, and it also has two holes in the shank for an 11" or 12" length. All CURT adjustable ball mounts come with a 2" x 2" shank and are made with sturdy st...

  • Color: Black
  • Brand: Curt Manufacturing
  • ASIN: B000JS33E8
  • UPC: 612314117031

Curt Manufacturing CURT 113263 Custom Class 1 Trailer Hitch with Ball Mount (1-1/4" Receiver)

Curt Manufacturing CURT 113263 Custom Class 1 Trailer

CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc).Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Saab 9-3 sedan with single exhaust or convertible with single exhaust (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with a hitch pi...

  • Brand: Curt Manufacturing
  • ASIN: B000BRKYH6
  • UPC: 612314113262

CURT 113181 Class 1 Trailer Hitch with Ball Mount

CURT 113181 Class 1 Trailer Hitch with Ball

CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc).Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Saab 9-2X, Subaru Impreza coupe, sedan or wagon, Subaru Outback sport or Subaru WRX (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes w...

  • Brand: Curt Manufacturing
  • ASIN: B003PIQ3J6
  • UPC: 612314016242

Curt Manufacturing CURT 111402 Class 1 Trailer Hitch with Ball Mount

Curt Manufacturing CURT 111402 Class 1 Trailer Hitch

CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc).Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Saab 9-3 Sport Combi wagon with dual exhaust (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It comes with a hitch pin and clip and all necessary installation hardware. This c...

  • Brand: Curt Manufacturing
  • ASIN: B00537FQUO
  • UPC: 612314030224

Curt Manufacturing CURT 111401 Class 1 Trailer Hitch with Ball Mount

Curt Manufacturing CURT 111401 Class 1 Trailer Hitch

CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc).Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Saab 9-3 Sport Combi wagon with dual exhaust (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It comes with a hitch pin and clip and all necessary installation hardware. This c...

  • Brand: Curt Manufacturing
  • ASIN: B00537FQ9U
  • UPC: 612314030217
Similar Curt Saab Hitch Results
Curt Saab Hitch Video Results
           

Saab 9-2x - Installation of Curt Hitch and Hopkins Wiring Kit - Subaru Impreza

Curt Saab Hitch

Hopkins 43855 Plug-In Simple Vehicle Wiring Kit and Curt 11318 Class 1 Trailer Hitch. The hitch requires a bit of modification with a hammer and the plug for the wiring kit is a bit difficult to find.

Tags:

Trailer Hitch Installation - 2005 Saab 9-3 - etrailer.com

Curt Saab Hitch

Learn more at https://www.etrailer.com Learn more at https://www.etrailer.com Subsribe to the etrailer.com channel https://www.youtube.com/user/etrailertv Visit us at https://www.etrailer.com Today we are going to install part number 11326 from Curt, and we are going to install this 1-1...

Tags: Trailer Hitch,etrailer.com

Trailer Wiring Install: CURT 56146 Taillight Converter

Curt Saab Hitch

http://www.curtmfg.com This video depicts the installation of the CURT 56146 Taillight Converter. You must read and understand the supplied instruction sheet(s) prior to installing. https://www.curtmfg.com/masterlibrary/56146/installsheet/CME_56146_INS.PDF Application Coverage Information: ht...

Tags: Electrical Wiring,Trailer,54616,curt,curtmfg,cu...