RUHITOOLS B2110 2 Flute Ball Nose Up Cut Solid Carbide Sprial Bit with 1/8" x 1/2" x 1/4" x 2"

RUHITOOLS B2110 2 Flute Ball Nose Up Cut

Best used for: Smooth contour milling & carving. Cutting Diameter: 1/8" Cutting Length: 1/2" Shank Diameter: 1/4" Overall Length: 2" Flutes: 2 The ball nose end mills' rounded tip is designed to reduce tool markings on work pieces of intricate tool paths and varying depths. Big bits will produce the smoothest results while smaller bits will produce the finest detail.

  • Brand: Ruhitools
  • ASIN: B07N1GYL2R
  • UPC: 743815178389

Kodiak Cutting Tools KCT133681 USA Made Solid Carbide Ball Nose End Mill, Coated, 4 Flute, 1/4" Shank, 1/2" Length of Cut, 2" Overall Length, 1/4" Diameter

Kodiak Cutting Tools KCT133681 USA Made Solid Carbide

1/4 Inch Diameter Solid Carbide End Mill - Coated 1/4" Shank 1/2" Length of Cut 2" Overall Length 4 Flute Carbide - Coated.

  • Brand: Kodiak Cutting Tools
  • ASIN: B007BTRBI2
  • UPC: 789957220913

HOZLY for Wood Working Set Diameter 1mm 1.5mm 2.0mm 2.5mm 3.175mm Carbide Ball Nose End Mill CNC Engraving Router Bits Milling Cutter

HOZLY for Wood Working Set Diameter 1mm 1.5mm

Specification Model Number: 1.0-3.175 Flute : 2 Flutes Cutting Diameter: d=1 1.5 2 2.5 3.175 MM Shank Diameter : D=3.175MM Blade length: L1=4 6 12 17 22mm Overall length: L=38-42MM Material : Solide Carbide from china Coating : uncoated application: For wood, MDF, HDF, solid wood, epoxy board, PVC, plastic Package including: 10PCS 3.175*1*4*38 2PCS 3.175*1.5*6*38 2PCS 3.175*2*12*38 2PCS 3.175*2.5*17*38 2PCS 3.175*3.175*22*42 2PCS

  • Brand: HOZLY
  • ASIN: B07G4BSBH7
  • UPC: 733430892883

Cobra Carbide 23246 Micro Grain Solid Carbide Regular Length General End Mill, Uncoated (Bright) Finish, 4 Flute, 30 Degrees Helix, Ball Nose End, 9/16" Cutting Length, 5/32" Cutting Diameter, 2" Length (Pack of 1)

Cobra Carbide 23246 Micro Grain Solid Carbide Regular

Cobra Carbide general end mill has center cutting geometry. Designed for milling, slotting, profiling and trace milling. Used for finishing operation. Manufactured from premium sub micron grain carbide. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Work material: nickel/inconel alloy and titanium; good for hardened steel, stainless steel; excellent for aluminum alloy, carbon steel, alloy steel and cast iron.

  • Brand: Cobra Carbide
  • ASIN: B00ECL6FJS

Kodiak Cutting Tools KCT133351 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/4" Shank, 3/4" Length of Cut, 2-1/2" Overall Length, 1/4" Diameter

Kodiak Cutting Tools KCT133351 USA Made Ball Nose

1/4 Inch Diameter Solid Carbide End Mill - Coated 1/4" Shank 3/4" Length of Cut 2-1/2" Overall Length 4 Flute Carbide - ALTiN Coated Diameter Tolerance: +.000"/-.002"Shank Diameter Tolerance: -.0001"/-.0004"ALTIN is a high performance coating for milling, tapping and drilling in stainless steels, carbon steels, alloy steels, titanium and cast iron. This coating is extremely heat resistant and can be used with or without coolant. It is exceptional in difficult to machine materials where adhesive wear is particularly high.

  • Brand: Kodiak Cutting Tools
  • ASIN: B0070YYRU8

CGC Tools CEM132B4TICN Primate Standard End Mill, TiCN Coating, Ball Nose, 4 Flute, 1/32" Diameter, 5/64" LOC, 1-1/2" OAL, 1/8" Shank

CGC Tools CEM132B4TICN Primate Standard End Mill, TiCN

"WEAPONS OF MASS PRODUCTION" Like their uglier cousins the "Gorilla Mills", Primate are standard 2, 3 and 4 flute carbide end mills recommended for machining applications in all materials. Primates have an emphasis on be very cost effective but are still GMP Edge Prepped to hone the cutting edge in a controlled environment to reduce the fracturing that occurs to the cutting edge during the milling process while greatly increasing tool life and enhancing finish. Completely resharpenable, and can be run dry or wet.Gorilla Mill end mills and cutting tools and Gorilla Drills are manufactured and sharpened at our North American plant outside of Milwaukee, Wisconsin. Our modern facility has been producing and sharpening cutting tools for the aerospace, automotive, medical and manufacturing industries for well over 30 years. The marketplace is overwhelmed with variable helix end mills. Like the Gorilla Mill, some are patented, most are not. One thing that matters most is performance in the machine tools. Gorilla Mills will reduce chatter, decrease cycle times, extend tool life and create a superior tolerance and finish. Prepare for battle. Make sure there's a Gorilla Mill on board.

  • Brand: CGC Tools
  • ASIN: B00NHDUNEU
  • UPC: 798167977975

CMT 199.008.11 Solid Carbide Upcut Ball Nose Spiral Bit with 1/4-Inch Diameter with 1/4-Inch Shank

CMT 199.008.11 Solid Carbide Upcut Ball Nose Spiral

Solid Carbide Upcut Ball Nose Spiral Bit featuring 2 cutting edges for cutting, copying, panel sizing and any routing applications in solid wood, or wood composites, plastic materials and laminates. High feed speed on well-clamped workpiece. Can used on maching centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. High-quality carbide cutting edges, best finishing on the lower side of the workpiece, upward chip ejection. 1/4-Inch Cutting Diameter and 1/4-Inch Shank.

  • Brand: CMT
  • ASIN: B00EV5A2A8
  • UPC: 664252038190

JERRAY Made Carbide Ball Nose End Mill, HRC55 With AlTiN Coated, 2 Flutes, 1/4 Shank, 1/2 Length of Cut, 2" Overall Length, 1/4 Diameter,1/8 Radius,Router bits

JERRAY Made Carbide Ball Nose End Mill, HRC55

  • Brand: JERRAY
  • ASIN: B07D64T1V8

Yonico 34212-SC CNC Router Bit with Ball Nose Solid Carbide 3/16" x 3/4" x 1/4" x 2" 1/4" Shank

Yonico 34212-SC CNC Router Bit with Ball Nose

Best used for: Smooth contour milling & carving. • Cutting Diameter: 3/16" • Cutting Length: 3/4" • Shank Diameter: 1/4" • Overall Length: 2" • Flutes: 2. The ball nose end mills' rounded tip is designed to reduce tool markings on work pieces of intricate tool paths and varying depths. Larger bits will produce the smoothest results while smaller bits will produce the finest detail.

  • Brand: Yonico
  • ASIN: B01I1YRY6E
  • UPC: 765573830217

1/2" 4 Flutes Ball End Solid Carbide Endmill, Cutting Diameter 1/2", Cutting Length 1", Over All Lenght 3"

1/2" 4 Flutes Ball End Solid Carbide Endmill,

Cutting Diameter: 1/2" Cutting Length: 1" Shank Diameter: 1/2" Over All Lenght: 3" Coating: Not Coated Tool Type: Milling

  • Brand: NG Tool
  • ASIN: B07HY13Y7X
  • UPC: 769489462647

Kodiak Cutting Tools O8-G61J-HPXK USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 3/8" Diameter, 3/8" Shank, 1" Length of Cut, 2-1/2" Overall Length

Kodiak Cutting Tools O8-G61J-HPXK USA Made Ball Nose

3/8" Shank 1" Length of Cut 2-1/2" Overall Length 4 Flute Carbide - ALTiN Coated Diameter Tolerance: +.000"/-.002"Shank Diameter Tolerance: -.0001"/-.0004"ALTIN is a high performance coating for milling, tapping and drilling in stainless steels, carbon steels, alloy steels, titanium and cast iron. This coating is extremely heat resistant and can be used with or without coolant. It is exceptional in difficult to machine materials where adhesive wear is particularly high.

  • Brand: Kodiak Cutting Tools
  • ASIN: B00JFHARG6

Cobra Carbide 23790 Micro Grain Solid Carbide Regular Length General End Mill, TiN Coated, 4 Flute, 30 Degrees Helix, Ball Nose End, 1-1/2" Cutting Length, 3/4" Cutting Diameter, 4" Length (Pack of 1)

Cobra Carbide 23790 Micro Grain Solid Carbide Regular

Cobra Carbide general end mill has center cutting geometry. Designed for milling, slotting, profiling and trace milling. Used for finishing operation. Manufactured from premium sub micron grain carbide. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Round shanks allow use with a wide variety of toolholding systems. Work material: nickel/inconel alloy and titanium; good for hardened steel, stainless steel; excellent for aluminum alloy, carbon steel, alloy steel and cast iron.

  • Brand: Cobra Carbide
  • ASIN: B00ECL7P8I

KEHAOU CNC Tools R0.25 & R0.5 & R0.75 & R1.0 with 4mm and 15mm Cutting Length Shank Milling Cutter HRC55, 2 Flutes,4mm Diameter,2'' Overall Length Tapered Ball Nose End Mills 4pcs/Package

KEHAOU CNC Tools R0.25 & R0.5 & R0.75

KEHAOU/ Two flutes spiral tapered ball nose Flutes: 2 Flutes / Tip Radius:0.25mm ,0.5mm,0.75mm,1.0mm Shank Diameter: 4mm ((d1) / Cutting Length: 15mm(L1) Overall Length: 40mm(L) / Material hardness:HRC55 4pcs/Package Assorted CNC 2D and 3D Carving R0.25 & R0.5 & R0.75 & R1.0 with 4mm Shank Tungsten Solid Carbide Tapered Ball Nose End Mills and Cone Cutter HRC55 with Coated Type: Tapered Ball Nose End Mill / Cone Cutters -Flutes: 2 Flutes -Coating: TiAIN - HRC55 Package Include 4 Pc End Mill

  • Brand: KEHAOU
  • ASIN: B07L9KXVP6
  • UPC: 889971340298

Kodiak Cutting Tools KCT133032 USA Made Solid Carbide Ball Nose End Mill, 4 Flute, 3/8" Shank, 1" Length of Cut, 2-1/2" Overall Length, 3/8" Diameter

Kodiak Cutting Tools KCT133032 USA Made Solid Carbide

3/8 Inch Diameter Ball Nose Solid Carbide End Mill - Single End 3/8" Shank 1" Length of Cut 2-1/2" Overall Length 4 Flute Carbide - Single End Diameter Tolerance: +.000"/-.002"Shank Diameter Tolerance: -.0001"/-.0004".

  • Brand: Kodiak Cutting Tools
  • ASIN: B0070YYQ36
  • UPC: 789957250699

Ruhitools B2130 Ball Nose Upcut Solid Carbide Spiral Router Bit with 1/4" x 1" x 1/4" x 2-1/2" Shank 1/4"

Ruhitools B2130 Ball Nose Upcut Solid Carbide Spiral

we are manufacture for solid carbide tools, special for wood tools, plastic tools, no-metal tools, including router bit,spiral bit, up/down bit, compression bits, profile bit, carbide rods from Gesac, 5 axis CNC machine from Germany, provide stable quality, delivery in time.

  • Brand: Ruhitools
  • ASIN: B07L2WCW3Z
  • UPC: 743815178280

Kodiak Cutting Tools KCT138356 USA Made Solid Carbide End Mill, Extra Long, 4 Flute, 1/4" Shank, 1-1/2" Length of Cut, 4" Overall Length, 1/4" Diameter

Kodiak Cutting Tools KCT138356 USA Made Solid Carbide

1/4 Inch Diameter Solid Carbide End Mill - Extra Long 1/4" Shank 1-1/2" Length of Cut 4" Overall Length 4 Flute Carbide - Extra Long.

  • Brand: Kodiak Cutting Tools
  • ASIN: B007BTQOOY

RUHI T41A0 1/16" Diameter 4 Flutes Up Cut Taper ZRN Coated Sprial Router Bit with 1/4" Shank, 1/16" x 1" x 1/4" x 2 1/2"

RUHI T41A0 1/16" Diameter 4 Flutes Up Cut

This tapered end mill has a 1/16" radius cutting tip and a 1" cutting length. The 4 flutes and the ZRN coating provide great performance and extended tool life. Tapered CNC end mills with ZRN coating provide the extra length needed to carve 3D shapes out of solid wood, plastic, foam and other materials. The tapered design provides added strength to the bit while still maintaining a small radius at the bit's tip. This unique design provides clearance when routing 3D profiles and allows you to create complex carvings in all kinds of stock. With the added ZRN coating, the bit's lifespan and durability are increased substantially avoiding unnecessary down time.

  • Brand: Ruhitools
  • ASIN: B07N1J2HPW
  • UPC: 743815178396

CGC Tools CEM14BXL2 Primate Standard End Mill, Ball Nose, 2 Flute, 1/4" Diameter, 1-1/2" LOC, 4" OAL

CGC Tools CEM14BXL2 Primate Standard End Mill, Ball

"WEAPONS OF MASS PRODUCTION" Like their uglier cousins the "Gorilla Mills", Primate are standard 2, 3 and 4 flute carbide end mills recommended for machining applications in all materials. Primates have an emphasis on be very cost effective but are still GMP Edge Prepped to hone the cutting edge in a controlled environment to reduce the fracturing that occurs to the cutting edge during the milling process while greatly increasing tool life and enhancing finish. Completely resharpenable, and can be run dry or wet.Gorilla Mill end mills and cutting tools and Gorilla Drills are manufactured and sharpened at our North American plant outside of Milwaukee, Wisconsin. Our modern facility has been producing and sharpening cutting tools for the aerospace, automotive, medical and manufacturing industries for well over 30 years. The marketplace is overwhelmed with variable helix end mills. Like the Gorilla Mill, some are patented, most are not. One thing that matters most is performance in the machine tools. Gorilla Mills will reduce chatter, decrease cycle times, extend tool life and create a superior tolerance and finish. Prepare for battle. Make sure there's a Gorilla Mill on board.

  • Brand: CGC Tools
  • ASIN: B00NHDTKTO

Melin Tool EMG-B Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 3 Flutes, 2" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter

Melin Tool EMG-B Carbide Ball Nose End Mill,

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness. Round shanks allow use with a wide variety of toolholding systems. 3 flute design will usually allow feed rates 50 percent faster than 2 flute tools. Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and nonferrous materials. Standard length.

  • Brand: Melin Tool
  • ASIN: B0083LSO8S
  • UPC: 733438578291

Cobra Carbide 25618 Micro Grain Solid Carbide Regular Length General End Mill, Uncoated (Bright) Finish, 4 Flute, 30 Degrees Helix, Ball Nose End, 25mm Cutting Length, 12.0mm Cutting Diameter, 75mm Length (Pack of 1)

Cobra Carbide 25618 Micro Grain Solid Carbide Regular

Cobra Carbide general end mill has center cutting geometry. Designed for milling, slotting, profiling and trace milling. Used for finishing operation. Manufactured from premium sub micron grain carbide. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Work material: nickel/inconel alloy and titanium; good for hardened steel, stainless steel; excellent for aluminum alloy, carbon steel, alloy steel and cast iron.

  • Brand: Cobra Carbide
  • ASIN: B00ECM50IE
Similar Diameter Ball Nose Results
Diameter Ball Nose Video Results
           

Corner Radius and Ball Nose Grinding Illustration

Diameter Ball Nose

This is a simplified illustration of radius grinding. The CUTTERMASTER Professional and Toycen Air Spindle has been designed for corner radius (bull nose) and ball nose grinding. Your attention to detail during set up is essential to your success. As with any surface on the cutter, grinding a...

Tags: radius grinding,corner radius,ball nose,bull no...

Best For wood working set diameter Carbide Ball Nose milling cutter Review

Diameter Ball Nose

For wood working set diameter 1mm 1.5mm 2.0mm 2.5mm 3.175mm Carbide Ball Nose End Mill CNC Engraving Router bits milling cutter http://ali.pub/2i99i8

Tags: Best For wood working set diameter Carbide Ball...

SBN - Spherical Ball Nose Demo

Diameter Ball Nose

.030" Semi-finishing Demo 3/4" diameter SBN 8,000 RPM 210 IPM .010” Finishing Pass Demo 1/2” diameter SBN 12,000 RPM 300 IPM

Tags: