WEN 3403 1,500 CFM 16-Amp 5-Micron Woodworking Dust Collector with 50-Gallon Collection Bag and Mobile Base

WEN 3403 1,500 CFM 16-Amp 5-Micron Woodworking Dust

Remember when you had a clean work shop? Control the mess and minimize cleanup with the WEN 1,500 CFM 5-Micron Dust Collector. This powerful motor provides up to 16 amps of dust collection power, creating 1,500 cubic feet per minute worth of high velocity circulation. Attach up to two hoses at a time to either of the 4-inch inlets, allowing for connection to multiple woodworking tools all at one time. Combine that with the four swivel casters and mobile base for a versatile and powerful dust extractor that can be easily stored and moved around. The included vertical collection bag holds up to 50 gallons of dust at a time, so you can spend your time woodworking instead of constantly emptying out wood chips. The quick-release clasp makes for simple bag installation while the high speed steel impeller rotates over 3450 times per minute for maximum suction. Compatible with the WEN 28200 10-Foot 4-Inch Dust Hose and the WEN 28221 20-Foot 4-Inch Dust Hose. And, because its a WEN product, your dust collection system comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN. NOTE: requires a NEMA 5-20R 20-amp outlet with a 25A circuit breaker (see images for reference).

  • Brand: WEN
  • ASIN: B078BSVGMZ
  • UPC: 044459034032

RIPNADO Band Saw Dust Collection

RIPNADO Band Saw Dust

Wood dust is a known carcinogen. The band saw create a tremendous amount of fine dust. It's the type of dust that ends all over the shop and in the air you breathe. RIPNADO is a new dust collection accessory for the bandsaw (Patent Pending). We've designed RIPNADO around the traditional / typical 14" bandsaw. In our experience RIPNADO collects nearly all (98%) of the wood dust at the bandsaw. We believe RIPNADO is more effective than the dust collection but into any existing bandsaw. Ripnado works with standard 14" bandsaws with round table inserts approximately 2" in diameter. Ripnado works with either a dust collector or shop vacuum but is more effective with the higher static pressure of shop vacuums. Ripnado is easily removed and re-attached with bandsaw blade changes. The magnetic sheets (3 are included) surround the band saw blade and direct the vacuum flow to right at the bandsaw blade. The magnetic fitting securely attach over the magnet sheet with rare earth magnets. The included 4 foot hose is light weight and flexible. It matches to the inside diameter of a 1 1/4" shop vac hose or adapter. Finally an effective dust collection accessory that picks up dust right at the source!! Whats included: Three round magnetic sheets Rare earth magnetic fitting Flexible / lightweight...

  • Brand: Drillnado
  • ASIN: B07QYBPPT2
  • UPC: 633653060383

GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG

GRR-RIPPER 3D Pushblock for Table Saws, Router Tables,

Grr-ripper 3D push Block a must-have for any table saw user.essential protectionit's essential for superior precision, control and safety on your table saw and other major woodworking machinery. Protect your hands like never before, virtually eliminate kickback with unmatched control, and guide and rip With surgical precision. extreme controlthe powerful green grr-rip gives you a commanding hold over the work piece for total control.grr-ripper has three legs to give you three-directions of control on the keeper and off-cut work piece. It provides downward pressure to virtually eliminate kickback, inward pressure to keep the stock against the fence, and forward pressure to prevent burning.unmatched precisionstabilize your cut with the built-in balance Support to square your cut and safely handle the smallest parts of wood When cutting on the table saw or router Table. Rip as accurate as a 1/4" Standard without readjusting the fence. fully adjustablethe adjustable center Leg accommodates for a variety of different sizes and widths of material while the grip secures a virtually unlimited variety of woods, solid surfaces, aluminum or even plastic. Grr-ripper handle can be angled and adjusted for your comfort and control.total versatilitygrr-ripper videos feature over 30 unique uses o...

  • Color: Yellow
  • Brand: MICRO JIG
  • ASIN: B001I9UNWC
  • UPC: 733353322429

SCROLLNADO Dust collection for the scroll saw (Dewalt DW 788, Delta 40-690, Delta 40-694, Delta 40-695)

SCROLLNADO Dust collection for the scroll saw (Dewalt

We are excited to introduce a new (patent pending) dust collection accessory for the scroll saws. SCROLLNADO works with some of the most popular scroll saws (Dewalt DW 788, Delta 40-690, 40-694, and 40-695). We hope apply our patent pending dust collection accessory to other scroll saws in the near future. Our innovative accessory collects wood dust right its source, very near the scroll saw blade. In addition, SCROLLNADO collects dust below and above your wood workpiece collecting almost all of the dust that is created. This accessory easily installs in minutes with no modification to your scroll saw. We use thin walled tubes to put the vacuum near the source, right at your blade (above and below your workpiece). Because we use a thin walled tube, there is no risk of harming your scroll saw if the scroll saw arms strikes the dust collection tube. The result is placing the dust collection right at the source collecting nearly all of the dust created. Below your workpiece (and scroll saw table), the scroll saw blade actually passes through holes in the dust collection tube. The tube actually surrounds the blade under the table (hard to get much closer). Any dust that would have fallen below the table get sucked into our dust collection tube before it can get very far. Above your w...

  • Brand: Scrollnado
  • ASIN: B01KCNI77C
  • UPC: 633653050445

DEWALT DCP580B 20V MAX Brushless Planer (Tool Only)

DEWALT DCP580B 20V MAX Brushless Planer (Tool

The DEWALT DCP580B 20V MAX* Brushless Planer features a brushless motor which provides power and runtime of 32,000 cuts per minute and can achieve a fast removal rate with 5/64" (2 mm approximately) maximum depth of cut. This tool offers a calibrated depth adjustment knob to 5/64" (2 mm approximately). The precision-machined front and back aluminum shoes ensure parallelism of cut and the kickstand allows user to rest the planer on work surface without gouging the material. A precision machined groove in the front shoe allows for edge chamfering. A Poly-V drive belt provides increased belt durability and an ergonomically designed handle provides greater comfort and less user fatigue. Includes: Planer, Users Guide, Guide Fence, Wrench.

  • Brand: DEWALT
  • ASIN: B01FHOWQQO
  • UPC: 885911450126

Hitachi 308506 Dust Collection Adapter for Hitachi C10FSH, C8FB2, C10FCH, C12FSA, C12LCH and C15FB Compound Miter Saws

Hitachi 308506 Dust Collection Adapter for Hitachi C10FSH,

The Hitachi 308506 Dust Collection Adapter is a well-built adapter which collects wood shavings, soot and particles. This product will not tear or fray and is compatible with Hitachi C10FSH, C8FB2, C10FCH, C12FSA, C12LCH and C15FB Compound Miter Saws. This product helps collect all types of debris, keeping your workstation dust and soot free. This product is made of high quality materials and withstands months of vigorous use. With a durable tear-free construction, this collection adapter will not leak or spill dust in your workstation and attaches in seconds. The Hitachi 308506 Dust Collection Adapter is warranted to the original purchaser to be free from defect in materials and workmanship for a period of 30-days from the original purchase date. Every Hitachi accessory is designed to the highest standards and is rigorously tested for both performance and durability. Since its inception, Hitachi has pioneered innovative technologies that have improved the quality of craftsmanship worldwide. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.

  • Brand: Hitachi
  • ASIN: B002FITX1C
  • UPC: 719592214718

POWERTEC 70136 4-Inch to 2-1/2-Inch Cone Reducer

POWERTEC 70136 4-Inch to 2-1/2-Inch Cone

The POWERTEC 4-Inch to 2-1/2-Inch Cone Reducer allows you to connect 4-Inch port to a 2-1/2-Inch hose or a 2-1/2-Inch port to a 4-Inch hose. The 2-1/2-Inch opening also allows you to fit Shop-Vac, Sears and a variety of other wet/dry vacuum cleaners. Simple to install, use and uninstall for the utmost in ease, performance and reliability.

  • Color: Original version
  • Brand: POWERTEC
  • ASIN: B002DSDSY2
  • UPC: 736815005656

POWERTEC 70006 Dust Filter Bag, 14-Inch by 24-Inch, 1-Micron

POWERTEC 70006 Dust Filter Bag, 14-Inch by 24-Inch,

Optimize the performance of your dust collection system with the POWERTEC Dust Filter Bag, 1-Micron. Featuring a superior construction of singed-felt, designed to catch and retain fine dust and debris while maximizing airflow and system suction. Peak dust-collection efficiency means you can enjoy working in an environment with both clearer, breathable air and cleaner room surfaces.

  • Brand: POWERTEC
  • ASIN: B00O1PMOUE
  • UPC: 736815005861

SHOP FOX W1685 1.5-Horsepower 1,280 CFM Dust Collector

SHOP FOX W1685 1.5-Horsepower 1,280 CFM Dust

A powerful dust collector from Shop Fox. This unit features an extra heavy-duty 12" steel impeller and a 1-1/2 HP motor that runs on 110V. For wood dust only. Features 2.5 micron filtration.

  • Color: White
  • Brand: Shop Fox
  • ASIN: B001R23SS6
  • UPC: 754001016859

Makita 9403 4" x 24" Belt Sander

Makita 9403 4" x 24" Belt

Makita’s 4" x 24" Belt Sander, model 9403, combines power and speed with ease-of-use features and less noise for fast and efficient stock removal. The 9403 is ideal for woodworkers, carpenters, furniture makers, floor installers, deck builders and general contractors who require a best-in-class belt sander. The 9403 features a powerful 11 AMP motor with electronic speed control to maintain constant speed under load, with a 4" wide belt and a speed of 1,640 ft./min. for fast stock removal. The 9403 also features less noise: at only 84dB, it is one of the quietest sanders in its class.

  • Color: Teal
  • Brand: Makita
  • ASIN: B0000223IY
  • UPC: 088381025621

POWERTEC 70149 Dust Control Flex Cuff with Hose Clamps, 4-Inch

POWERTEC 70149 Dust Control Flex Cuff

The POWERTEC Dust Control Flex Cuff with Hose Clamps, 4-Inch, delivers an airtight connection from one dust-collection fitting to another of comparable size, while eliminating the need for flimsy duct tape connections or other permanent fasteners. Firm yet pliable rubber construction allows enough flexibility to bridge slight diameter differences in hose or tubing. Pre-molded indents on the cuff allows for easy, airtight clamp installation. Handy set includes one rubber cuff and two steel hose clamps.

  • Brand: POWERTEC
  • ASIN: B00M3JDU2Q
  • UPC: 736815006004

POWERTEC 71009 Safety Push Block and Stick Set | 5 Pack | Ergonomic Handles with Max Grip | Push blocks and Sticks for Table Saw, Jointers and Woodworking | for Woodworker Safety & Control

POWERTEC 71009 Safety Push Block and Stick Set

Introducing the Max Grip Push Block and Push Stick Set by POWERTEC.This well crafted and premium version safety orange push block & stick set includes 3 push blocks ( one long and two short ) and 2 push sticks ( one straight push stick and one v stick ).  The push blocks ( often called push pads ) are essential for use on routers, jointers and table saws. The straight push stick is great for narrow stock or when space is limited.  The V-shaped push stick ( sometimes called a V-type push stick or v-shaped putter ) is great when extruding, or needing to exert a more detailed control on your work piece, or if needing to get really close to the blade.  Our exclusive woodworking push block and stick set is the perfect addition to any safety or woodworking tool set.Safety Through and ThroughNot only do they help keep your hands out of harms way, but they reduce the risk of kickback, often resulting in smoother cuts or general improvements in other applications, producing a more efficient and professional looking finish no matter how small or large the work. But essentially, they are used to help maintain a firm and consistent downward pressure on your stock or a more controlled ride through the cutting blade. Simple and Effective UseWhen the blocks are used at the leading end of yo...

  • Brand: POWERTEC
  • ASIN: B00LPR5I1I
  • UPC: 736815005595

Jet 709563 CB-5 Clear Plastic Collection Bag, 5-Pack

Jet 709563 CB-5 Clear Plastic Collection Bag,

  • Color: Clear
  • Brand: Jet
  • ASIN: B00006XMTP
  • UPC: 662755466342

DEWALT DCH273B 20v Max Brushless SDS Rotary Hammer (Tool Only)

DEWALT DCH273B 20v Max Brushless SDS Rotary

The DEWALT DCH273B 20v Max Brushless SDS Rotary Hammer Bare tool features a DEWALT brushless motor for extended runtime and durability. It also offers Active Vibration Control which significantly reduces vibration and increases user comfort and productivity; a Perform and Protect feature from DEWALT. This rotary hammer gives 2.1 Joules impact energy which provides corded power without the cord. It also has a retractable utility hook for convenient hanging and storage. This is a bare tool item - battery sold separately. Includes: 360 Degree Side Handle, Depth Rod, Retractable Utility Hook.

  • Brand: DEWALT
  • ASIN: B00YDZI9BA
  • UPC: 885911405102

WEN 6307 Variable Speed Detailing File Sander with 1/2-by-18" Belt

WEN 6307 Variable Speed Detailing File Sander with

Remember when you could sand the finest details of your workpiece? smooth out tight corners and strange contours in wood, metal, plastics and more with the WEN variable speed detailing file sander. The narrow 1/2-by-18-inch belt pivots 55 degrees to meet the particular needs of the project at hand. The auto-tracking design allows for automatic alignment of the sanding belts without the need for any adjustments. Easily switch between grits with the tool-free belt changing system or adjust the variable speed dial for speeds anywhere from 1080 to 1800 feet per minute. This handheld 2-amp belt sander weighs in at a mere 2-1/2 pounds with a compact body for squeezing into tight spaces and awkward angles. Minimize cleanup by hooking the sander up to a dust Collection system of your choice using the included dust port attachment. And, because it’s a WEN product, your WEN variable speed detailing file sander includes three abrasive sanding belts (80, 120, and 320 grit), a two-year warranty and a friendly customer help line all to make sure you remember WEN.

  • Color: Original Version
  • Brand: WEN
  • ASIN: B072Q2FTLY
  • UPC: 044459063070

Woodstock W1044 4-to-2-1/2-Inch Reducer

Woodstock W1044 4-to-2-1/2-Inch

We engineered the inside diameter of the 2-1/2-inch side of this fitting to duplicate the 2-1/2-inch opening on your Shop-Vac. Insert the Shop-Vac brand hose to the vacuum and the other end to one of these fittings to power the dust collection system. The outside diameter matches our standard dust collection hose to function as regular reducers.

  • Color: Black
  • Brand: Woodstock
  • ASIN: B0000223YJ
  • UPC: 885732133901

POWERTEC 70151 Dust Hood Rectangular Funneled Shape, 4-Inch By 10-Inch

POWERTEC 70151 Dust Hood Rectangular Funneled

The POWERTEC rectangular tapered hood's compact, rectangular design is ideal for bench-top operations and is the perfect solution when a smaller rectangular dust hood is needed for your dust collection system. Create a cleaner, healthier shop environment with this essential component. Can be placed in multiple positions.

  • Brand: POWERTEC
  • ASIN: B002E4WSRS
  • UPC: 736815006028

POWERTEC 70106 4-Inch Y-Fitting Dust Hose Connector

POWERTEC 70106 4-Inch Y-Fitting Dust Hose

The durable POWERTEC 4-Inch Y-Fitting Dust Hose Connector is the ideal solution for expanding your dust hose collection system, thereby optimizing system efficiency, flexibility and effectiveness. Use this sturdy, tight-fitting connector to facilitate a dual hose branch (connection) from a single main hose line. This handy component allows you the ability to connect two separate machines - or two hoses from the same machine - directly to the dust collector's main hose. Our premium airtight fittings help ensure that potent dust and debris is extracted and sucked straight into your dust collector, and clear, clean air is returned into your workshop environment. Allows your dust collection system the capacity to service multiple machines. Make it perfect with POWERTEC fittings - streamlined, simple to use, versatile! Three 4-Inch nominal ends measure 3-61/64-Inch O.D. and 3-3/4-Inch I.D.

  • Brand: POWERTEC
  • ASIN: B005VRJIW8
  • UPC: 785533784091

SHOP FOX W1727 1 HP Dust Collector

SHOP FOX W1727 1 HP Dust

Designed for portability, the model W1727 1 HP Dust Collector can be moved from one machine to another when needed, instead of having to build an entire fixed dust collection system and running ducts to each machine. CSA certified meeting CSA C22.2 #243-M91 and UL 1017-4th standards!

  • Brand: Shop Fox
  • ASIN: B001R23T44
  • UPC: 754001007277

WEN 3966 Two-Speed Band Saw with Stand and Worklight, 14"

WEN 3966 Two-Speed Band Saw with Stand and

Remember when power tools were actually powerful? The WEN 14-Inch Two-Speed Band Saw is the perfect companion for any workshop. With a 9.5-amp motor and a 13-3/8 inch throat, this beast will attack boards up to 8.85 inches deep and 13-3/8 inches wide. Two-speed operation allows for speeds of either 1420 or 3280 FPM. The design of this saw uses 100-3/4 inch blades anywhere from 1/8 to 1 inches in size for a variety of both intricate and powerful cuts. The spacious work table measures in at 21-1/2 x 15-3/4 inches in size and can be swiveled up to 45 degrees. This package includes a flexible work light to illuminate the worktable, a 3-in-1 dust port to fit a variety of dust extractor hoses (1-3/4, 2-3/4, 4 inches), a sawdust collection drawer, a fence for creating perfectly straight cuts, and a miter gauge for angled cuts. The onboard circle cutting guide helps create perfect circles and curves up to 32 inches in diameter. The upper housing includes a small window to reveal a blade tension gauge. This gauge helps properly identify whether a blade has the correct tension given its particular width. The easy-to-assemble stand elevates the band saw without sacrificing space on the shop’s work bench. Ball bearings give the blade smooth operation and a long lasting life for years of de...

  • Brand: WEN
  • ASIN: B01CHP7G34
  • UPC: 044459039662
Similar Dust Collection Band Saw Results
Dust Collection Band Saw Video Results
           

Improve your Bandsaw Dust Collection

Dust Collection Band Saw

My design gives improved dust collection for the Jet 14" bandsaw while being easily removable for blade changes.

Tags: Bandsaw,tablesaw,wood,woodworking,shop,diy,how ...

Bandsaw Dust Collection, Simple, Effective and Inexpensive.

Dust Collection Band Saw

I have a 2000 sq ft shop, 1000 on each of two levels. I have a 24" bandsaw upstairs and two 15" downstairs. Dust collection is critical both from a health perspective and a productivity perspective. I came up with a simple and inexpensive way to better control the fine dust produced from the b...

Tags: band saws,woodworking,dust collection,woodshop,...

Build: Bandsaw Dust Collection

Dust Collection Band Saw

It ain't pretty but it works! Today I build a dust collection port that attaches directly below the table of my 14" bandsaw with rare-earth magnets. I've actually been frustrated for a while now because I felt like there had to be a better way to connect my dust collector to my bandsaw but I co...

Tags: woodworking,bandsaw,band,saw,dust collection,du...