Edelbrock 8026 Transmission Cable Adapter

Edelbrock 8026 Transmission Cable

Designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford and dual-quad applications such as our new RPM Dual-Quad Air-Gap, Edelbrock C-26, F-28 and Street Tunnel Ram. For single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum ports for ignition advance. #1801/#1802 are calibrated for single-quad applications and factory equipped with: Metering Jets - Primary .086, Secondary .095, Primary Rod .065 x .052, orange spring (5" Hg). #1803/#1804 is calibrated for dual-quad applications and factory equipped with: Metering Jets - Primary .086, Secondary .077; Metering Rods - .065 x .057; #1804 includes Primary .086, Secondary .077; Metering Rods - .065 x .052; Step-Up Spring - orange (5" Hg). Use Carb Studs #8008 or #8024 if needed.

  • Brand: Edelbrock
  • ASIN: B00K9ZXFAI
  • UPC: 085347080267

Edelbrock 1483 Throttle Lever Adapter

Edelbrock 1483 Throttle Lever

The Edelbrock Throttle lever Adapter is designed for automatic transmission equipped vehicles with cable operated throttle except AOD (Auto Overdrive Transmission). These adapters work with cruise control.

  • Brand: Edelbrock
  • ASIN: B000CN4ZQK
  • UPC: 085347014835

Edelbrock 8009 Throttle Cable Adapter

Edelbrock 8009 Throttle Cable

Performer Series; Throttle Cable Adapter-GM.

  • Brand: Edelbrock
  • ASIN: B000CN713O
  • UPC: 085347080090

Edelbrock 1493 Throttle Cable Bracket

Edelbrock 1493 Throttle Cable

The Edelbrock Throttle Cable Plate Kits are for use with the Edelbrock-1483 throttle level adapters to reposition your factory throttle cable with the Edelbrock Performer Series carburetors. They are designed for products with cable operated throttles and automatic kick down rods.

  • Brand: Edelbrock
  • ASIN: B000CNAOPQ
  • UPC: 085347014934

Edelbrock 8034 Intake Manifold Installation Accessory

Edelbrock 8034 Intake Manifold Installation

The Edelbrock Intake Manifold Installation Accessory helps in a trouble-free manifold installation job for you with this comprehensive array of accessories. The accessories include anodized air cleaner hold nuts, manifold pipe plugs and everything in between.

  • Brand: Edelbrock
  • ASIN: B000CNAU2I
  • UPC: 085347080342

Edelbrock 8021 Kick-Down Lever Kit

Edelbrock 8021 Kick-Down Lever

The Edelbrock Kick-Down Lever Kit includes all items you need for a smooth and trouble free installation. From throttle cable extensions and adapters to kick-down mounting brackets, all of it is perfectly matched and designed for ease of use.

  • Brand: Edelbrock
  • ASIN: B000CN91QO
  • UPC: 085347080212

Edelbrock 1481 Throttle Lever Adapter

Edelbrock 1481 Throttle Lever

The Edelbrock Throttle Lever Adapters are designed for easy connection of your factory cable-operated linkages to your new Edelbrock Performer carburetor. They are available in a gold iridited finish to match the Edelbrock Performer Series carburetors.

  • Brand: Edelbrock
  • ASIN: B000CNAOM4
  • UPC: 085347014811

Edelbrock 9141 Manifold Installation Accessory

Edelbrock 9141 Manifold Installation

The Edelbrock Manifold Installation Accessories include many of the small items you need for a smooth and trouble free installation. It includes throttle cable extensions and adapters to kick-down mounting brackets. It is all perfectly matched and designed for easy use.

  • Brand: Edelbrock
  • ASIN: B000CNAUYQ
  • UPC: 085347091416

Edelbrock 1409 Performer Series Marine 600 CFM Square Bore 4-Barrel Air Valve Secondary Electric Choke New Carburetor

Edelbrock 1409 Performer Series Marine 600 CFM Square

The Edelbrock Performer Series Marine Square Bore Air Valve Secondary Electric Choke New Carburetor features modified bowl venting, specially designed throttle shafts, accelerator pump seal, 3/8 inch inverted flare fuel inlet fitting, tube in air horn for fuel pump vent, 5-1/8 inch flame arrestor flange, universal throttle lever and a revised secondary system for improved transient performance in marine applications. The Edelbrock square-bore carburetors are all-aluminum, ball-burnished and lightweight. There are no power valves to blow or plastic parts to break. The two-piece construction resists warping. Metering rods can be changed within seconds without carburetor removal. Their simple tub-type bowl and rear-pivot floats offer you trouble-free operation. The Edelbrock Performer warranty covers the replacement or repair of the product only and does not cover the cost of removal and installation.

  • Brand: Edelbrock
  • ASIN: B00062YA80
  • UPC: 085347014095

Edelbrock 1495 Throttle Cable Plate Kit

Edelbrock 1495 Throttle Cable Plate

The Edelbrock Throttle Cable Plate Kits are designed for engines with cable operated throttle and automatic kick down rod. This throttle cable plate kit is specially designed for throttle level adapters to reposition the factory throttle cable with the Edelbrock Performer Series carburetors. The bracket is made of steel with a gold iridite finish. This bracket has a carburetor base mounting style. It does not accept transmission kick down cable and does not include the return spring. It does include hardware and the throttle return spring.

  • Brand: Edelbrock
  • ASIN: B000CN6VQW
  • UPC: 085347014958
Similar Edelbrock Cable Adapter Results
Edelbrock Cable Adapter Video Results
           

Edelbrock Transmission Throttle Valve TV Cable Adapter 8026 Overview Install Tutorial 700R-4 2004-R

Edelbrock Cable Adapter

Edelbrock Transmission Throttle Valve TV Cable Adapter 8026 Overview Install Tutorial 700R-4 2004-R 4L60 http://www.jegs.com/i/Edelbrock/350/8026/10002/-1 Transmission Throttle Valve (TV) Cable Adapter Performer, Thunder AVS, Carter AFB Series Carbs GM 200R4, 700R4, 4L60 Transmissions -----------...

Tags: JEGS,edelbrock,trans,transmission,throttle,valv...

The Quadrajet to Edelbrock carburetor swap - step by step

Edelbrock Cable Adapter

Replacing my old Rochester Quadrajet with an Edelbrock 1406 carburetor. This is a 1984 Chevy K20 3/4, just a yard truck for plowing my property. The old Quadrajet got gunked up from a broken fuel filter so I decided to try swapping on this old Edelbrock. I had pulled this Edelbrock off an El C...

Tags: carburetor,rochester,quadrajet,edelbrock,1406,e...

70 Camaro SS Project "Edelbrock 750 Carb & Linkage"

Edelbrock Cable Adapter

Edelbrock 750 carb install on dads 70 Camaro SS with V8 350. Getting all the linkages hooked up and ready to go. Also some info we about the engine. Things that might help with a project like this: Edelbrock 750 Carb: https://amzn.to/2Uc5VU4 Throttle Ball Assortment: https://amzn.to/2PedndH ...

Tags: mossman381,camaro,edelbrock,750,1407,project,bu...