SRA #312 Soldering Flux Pen Low-Solids, No-Clean 10ml - Refillable

SRA #312 Soldering Flux Pen Low-Solids, No-Clean 10ml

This is the first environmentally friendly Flux Pen that can be refilled for a cost effective flux solution. Superior fluxing ability with Instant wetting Made in the USA This flux is free of any halides, resin, or rosin. This flux was designed for soldering high quality electronic printed circuit boards (PCBs), such as, through-hole, mixed technology, and surface mount assemblies while eliminating the need for a post cleaning operation. Residues are Non-Corrosive and Non-Conductive. If removal of the residue is needed then it can be cleaned with warm water. Flux conforms to IPC-ANSI-J-STD-004, Type ORL0. This Product is RoHS Compliant

  • Brand: SRA Soldering Products
  • ASIN: B008OC0E5M

Tools & Harware 8310000186 Kester 186 Soldering Flux Pen

Tools & Harware 8310000186 Kester 186 Soldering Flux

Kester 186 Soldering Pen

  • Brand: Kester
  • ASIN: B00YL1D3US

Liquid Flux No-Clean in 10ml (0.34oz) Pen w/tip

Liquid Flux No-Clean in 10ml (0.34oz) Pen

Description Liquid Flux No-Clean in 10ml (0.34oz) Pen w/tip Flux Type: No-Clean Liquid Flux (for Leaded and Lead-Free applications) Flux Classification: INM0 Packaging: Pen 10ml Shelf Life Refrigerated >24 months, unrefrigerated >24 months Storage and Handling Store refrigerated or at room temperature 3-25C (37-77F). The liquid flux can be allowed to freeze. Freezing will not degrade this product. Allow 4 hours for liquid flux to reach an operating temperature of 20-25C (68-77F) before use. Transportation This product has no shipping restrictions. Shipping below 0C (32F) or above 25C (77F) for normal transit times by ground or air will not impact this product's stated shelf life.

  • Brand: ChipQuik
  • ASIN: B07B53LNGX
  • UPC: 700254126494

Vikocell No Clean Solder Flux Pen for Electronics Tabbing Wire Soldering (Pack of 5)

Vikocell No Clean Solder Flux Pen for Electronics

Yosker flux-pen is a unique tool for rework and touch-up soldering. It allows controlled application of flux, eliminating the mess from flux bottles. The chisel point allows for work in very confined spaces. The flux pen is ideally suited for tab assembly no-clean and surface mount rework application because it can deliver flux to a specific area. Youker is a Halogen-free, non-rosin organic flux pen that is specifically designed for rework of conventional and surface mount circuit board assemblies. The extremely low solids content (2.0 percent ) and nature of the activator system results in practically no residue left on the assembly after soldering. There are no residues to interfere with electrical testing.Yosker exhibits improved soldering performance to minimize solder bridges during rework operations.

  • Brand: Vikocell
  • ASIN: B074J6R1KQ
  • UPC: 710560569113

MG Chemicals Flux Pen Soldering, 2 x 10 mL, Amber

MG Chemicals Flux Pen Soldering, 2 x 10

DESCRIPTION: the 835-p rosin flux pen contains a Type RA rosin-activated flux composed of Pure water white (WW) grade gum rosin. It is a unique solvent system that contains very effective activators. The superior fluxing remains consistent throughout the entire aeration process. The 835 provides fast wetting action and complies with all requirements for Type Rom1 flux per j-std-004. Application: the 835-p pen is designed to dispense flux in a precise application and used for leaded and lead-free chemistries. Excellent for prototyping and rework/repair on printed circuit boards. Works well on chip carriers, heat sinks, surface mounted device pads, switches, and sockets. Application instructions: the flux pen controls the flow via a spring-loaded felt tip. This helps keep evaporation to a minimum between use. 1. Depress the tip against a hard surface until the felt tip gets wet, but not flooding. 2. Gently brush the wet tip onto the soldering area to apply. To keep the felt saturated and the flow controlled, only press in the tip as needed. Attention! do not continuously keep the tip Depressed or do not press too hard. This can jam the Valve open and cause flooding. Note that a fresh felt tip will take a several seconds to fully saturate, so expect a delay before the flux starts to...

  • Color: Amber
  • Brand: MG Chemicals
  • ASIN: B077GVRMZQ
  • UPC: 779008835678

Kester 83-1000-0186 Mildly Activated Rosin Liquid Flux Pen for Lead-Bearing and Lead Free Alloy, 0.33 fl. oz.

Kester 83-1000-0186 Mildly Activated Rosin Liquid Flux Pen

Kester 2331-ZX Flux Pen is designed for leaded and lead-free rework of conventional and surface mount circuit board assemblies. Kester 2331-ZX is an innovation in organic acid water-soluble flux chemistry for soldering circuit board assemblies. This unique, neutral pH chemistry flux provides the best ionic cleanliness of any organic water-soluble flux available to the electronics industry. This popular flux has been used for soldering critical assemblies in the telecommunications, computer and other industries. No offensive odors will be emitted during soldering. Kester 2331-ZX will not create excessive foaming in standard water cleaning systems. Kester 2331-ZX has good soldering properties for improved productivity without sacrificing reliability of the assembly. This flux does not attack properly cured solder masks or FR-4 epoxy-glass laminate. Kester 2331-ZX is not detrimental to the surface insulation resistance of the soldered assembly. Use of this flux minimizes cleaning costs while complying with environmental regulations.

  • Color: Original Version
  • Brand: Tools & Harware
  • ASIN: B005T8OR4I
  • UPC: 768249068167

SRA Soldering Products PEN_RMA SRA #99-20 Rosin Rma Soldering Flux Pen - Refillable

SRA Soldering Products PEN_RMA SRA #99-20 Rosin Rma

This is the first environmentally friendly Flux Pen that can be refilled for a cost effective flux solution. Contains 10 ml of a MILDLY ACTIVATED ROSIN FLUX, TYPE RMA Superior fluxing ability with Instant wetting. It is completely chloride-free. The flux is widely used in electronic applications requiring excellent soldering activity and yielding residues with high water-extractresistivities. Residues are Non-Corrosive and Non-Conductive. If removal of the residue is needed then alcohol should be used. Flux conforms to IPC-ANSI-J-STD-004, Type ROL1. This Product is RoHS Compliant.

  • Brand: SRA Soldering Products
  • ASIN: B008OC3VMU
  • UPC: 696735412951

MG Chemicals 8341 No Clean Flux Paste, 10 milliliters Pneumatic Dispenser (Complete with Plunger & Dispensing Tip)

MG Chemicals 8341 No Clean Flux Paste, 10

No Clean Flux Paste. Convenient syringe dispenser ideal for touch up and repair of surface mount assemblies. A unique mixture of high grade synthetic resin and thixotropic agents designed specifically for use with high temperature lead free and conventional Sn/Pb alloys. It provides the fluxing activity levels that promote fast wetting action and maximum wetting spread. Flux paste is a no clean formulation therefore the residues do not need to be removed for most applications. Excellent wettability, no clean, non-conductive, non-tacky residues, compatible with lead free and leaded solder systems, thixotropic paste and RoHS compliant. RoHS compliant.

  • Color: Original Version
  • Brand: MG Chemicals
  • ASIN: B00425FUW2
  • UPC: 779008834107

Chemtronics CircuitWorks CW8100 No Clean Flux Dispensing Pen, 9ml

Chemtronics CircuitWorks CW8100 No Clean Flux Dispensing Pen,

The circuit works no clean flux dispensing pen meets all of the technicians needs for electronics rework and prototyping - repairing, cleaning, protecting, lubricating, bonding, and restoring electrical conductivity to circuit boards and components. Chisel tip marker provides exact delivery of flux to surface. Features * applies a patented noncorrosive, halide free, organic no-clean flux * flux meets bellcore tr-n-nwt-000078 and IPC sf-818 for surface insulation resistance * flux meets ANSI/IPC j-std-004, Type Rol0 * chisel tip marker provides exact delivery of flux to surface., country of origin - United States, manufacturer name - itw chemtronics.

  • Color: Original Version
  • Brand: CircuitWorks
  • ASIN: B000LBA7PG
  • UPC: 094700367020

Kester83-1000-0951 951 Soldering Flux Pen Low-Solids, No-Clean 10Ml

Kester83-1000-0951 951 Soldering Flux Pen Low-Solids, No-Clean

Kester flux-pen is a unique tool for rework and touch-up soldering. It allows controlled application of flux, eliminating the mess from flux bottles. The chisel point allows for work in very confined spaces. The flux pen is ideally suited for tab assembly no-clean and surface mount rework application because it can deliver flux to a specific area. Kester 951 is a Halogen-free, non-rosin organic flux pen that is specifically designed for rework of conventional and surface mount circuit board assemblies. The extremely low solids content (2.0 percent ) and nature of the activator system results in practically no residue left on the assembly after soldering. There are no residues to interfere with electrical testing. Kester 951 exhibits improved soldering performance to minimize solder bridges (shorts) during rework operations., country of origin - United States, manufacturer name - Kester.

  • Brand: Kester
  • ASIN: B004X4KOWS
  • UPC: 027041839512
Similar Flux Pen Results
Flux Pen Video Results
           

Soldering, rosin, flux and a flux pen

Flux Pen

Soldering tip cleaner http://bit.ly/2CyINYX Flux pen http://bit.ly/2zRkHXC Soldering paste http://bit.ly/2EkPlwt Desoldering braid http://bit.ly/2MiA8M5 If you really really want, you can solder without flux. But it is a painful experience. Almost all modern solders have flux integrated into its...

Tags: quadmeup,flux pen,soldering tips,soldering flux...

Soldering SMD components and integrated circuits (SOIC, TQPF) - Mustool MT233

Flux Pen

In this video i will try something diferent than usual. I will show you how I solder small surface mount components by hand. I will use this PBC , we will soder some capacitors resistors and diferent integrated circuit packages. For the firs time i will use flux pen, so i will also learn someth...

Tags: SMD soldering,how to solder SMD,SOIC,TQPF,how t...

Drag soldering SMD parts with a flux pen

Flux Pen

This video shows how to drag solder SMD parts with a high density package (in this video a Xilinx XC9572XL with VQFP 64 pin package is used). The board shown has an ENIG finish which makes the surface more smooth and equal, and is more easy to solder. The soldering iron is a Weller WTCP-S set...

Tags: drag,solder,weller,iron,wick,flux,pen