OEMTOOLS 25090 Harmonic Balancer Puller for GM, Chrysler, Cadillac, Chevy Trucks, Ford, and Mitsubishi - No Need to Remove The Radiator

OEMTOOLS 25090 Harmonic Balancer Puller for GM, Chrysler,

The OEMTOOLS Harmonic Balancer Puller is designed for use with Model GM 2000 Generation II, Cadillac (1988 and later), Chevrolet Trucks (2003 and later), Chrysler (1990 and later), Ford (1995 and later), and Mitsubishi Eclipse (1995)—designed for removing damper pulleys in tight engine compartments without removing the radiator. Includes 3 Jaw Puller, Forcing Rods (4 lengths included), and a Forcing Screw with a 3/8” square drive for ratchet use, and a ¾” hex for wrench or socket use. The OEMTOOLS Harmonic Balancer Puller includes unique tensioned jaws which makes for easy tool placement in tight quarters—a feature only found on the OEMTOOLS puller.

  • Brand: OEMTOOLS
  • ASIN: B01AIRR4EY
  • UPC: 076812134868

ARES 71002 | Harmonic Balancer Puller Set | Remove Damper Pulleys in Tight Engine Compartments Without Removing The Radiator Storage Case Included

ARES 71002 | Harmonic Balancer Puller Set |

Easier Removal Of Damper Pulleys In Tight Engine Compartments This ARES Harmonic Balancer Puller Set provides you with everything you need to remove damper pulleys in tight engine compartments without removing the radiator. With spring-loaded legs for optimal position retention and steel construction, you'll have the extra strength and enhanced design you need to get the job done. Whether you're working on a Chrysler, GM, Mitsubishi, Cadillac, or Oldsmobile, this set is the right fit.  Features:  Includes: 1 pc. 3-jaw puller, 4 pc. Forcing rods, 2 pc. forcing screws, 1 pc. Storage case One forcing screw is 3/8-inch square drive for use with ratchets One forcing screw is 3/4-inch hex drive for use with wrenches or sockets Steel construction Black oxide finish for corrosion resistance Designed for removing damper pulleys in tight engine compartments without removing radiator Spring-loaded legs for optimal position retention For use with a variety of Chrysler, GM, Mitsubishi, Cadillac, and Oldsmobile vehicles

  • Brand: ARES
  • ASIN: B079J6T6JB
  • UPC: 818765027800

ProForm 66515 Harmonic Balancer Installation Tool

ProForm 66515 Harmonic Balancer Installation

Proform Harmonic Balancer Installation Tools are used for installing the harmonic balancer. They use a pilot stud, which keeps the harmonic balancer perpendicular to the crankshaft's centerline, for a bind-free installation. These tools have a thrust bearing and a protective washer which allows the drive nut to rotate freely so the balancer is pressed on smoothly and evenly.

  • Brand: ProForm
  • ASIN: B000A8OGMU
  • UPC: 037995665150

Spectre Performance 4699 Harmonic Balancer Bolt

Spectre Performance 4699 Harmonic Balancer

Spectre’s Harmonic Balancer Bolt Kit is designed to fit Chevrolet Small Block 265-400 V8 engines. This grade 8 bolt is 2-1/2 inches long, and features a plated finish for corrosion resistance. This kit also includes a security lock washer.

  • Brand: Spectre Performance
  • ASIN: B000BPWSKE
  • UPC: 089601469904

ACDelco 12635650 GM Original Equipment Crankshaft Balancer

ACDelco 12635650 GM Original Equipment Crankshaft

ACDelco GM Original Equipment Engine Harmonic Balancers help help reduce torsional vibrations by connecting to the crankshaft of your vehicle’s engine. They serve as pulleys for the engine accessory drive belts, and are GM-recommended replacements for your vehicle’s original components. These original equipment harmonic balancers have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

  • Brand: ACDelco
  • ASIN: B00S0A33RY
  • UPC: 808709039136

Assault Racing Products 8035060 6.75" Small Block Chevy Harmonic Damper Internal Balance SBC 350

Assault Racing Products 8035060 6.75" Small Block Chevy

This damper is 6-3/4" in diameter and approximately 1-1/8" thick. This is one of the most popular damper for internally balanced small block Chevy's. This damper is dimensionally identical to the stock G.M. 6-3/4" damper. They have 60° of easy to read timing marks and engraved marks every 90 degrees. This high performance street model weighs approximately 8-1/2 pounds.

  • Brand: Assault Racing Products
  • ASIN: B071KGT5HP

Dorman 594-012 Harmonic Balancer

Dorman 594-012 Harmonic

Durable and sleek, Dorman Harmonic Balancers feature a stress-resistant rubber bond that withstands the damaging effects of heat, salt, ozone and general wear and tear. The ductile steel construction allows for improved tensile and impact strength, safeguarding the engine and maintaining fuel efficiency year after year. Dorman Harmonic Balancers undergo detailed dimensional checks of the full assembly and critical components to ensure the strength and integrity of the part.

  • Color: Black
  • Brand: Dorman
  • ASIN: B000C15CQY
  • UPC: 019495018599

PIONEER Harmonic Balancer Damper+BOLT compatible with Chevy SB 283 305 327 350 383 8" INT Balanced

PIONEER Harmonic Balancer Damper+BOLT compatible with Chevy SB

This listing is for a Pioneer OE-Replacement balancer (damper) and bolt for Chevrolet GEN I small block V-8 engines requiring an internally (neutral) balanced 8" OD balancer. P/N DA-3502 + 859012. Balancer specifications are as follows (all measurements are in inches): ENGINE BALANCE: Internal SAFETY RATING: Not SFI approved DEGREE MARKINGS: Yes OUTSIDE DIAMETER: 7.99" MATERIAL: Nodular iron CONSTRUCTION: Elastomer FINISH: Black painted CRANK BORE: 1.24" NOSE DIAMETER: 1.88" WEIGHT: 11.02 lbs. OVERALL WIDTH: 2.34"

  • Brand: IE PARTS GROUP
  • ASIN: B07CK4V2VH

OTC 6667 Harmonic Damper Puller

OTC 6667 Harmonic Damper

This puller fits the following applications: virtually all Chrysler and Mitsubishi vehicles (same as P/N 6267 but with updated applications), 4.2L I6 Trailblazer, Envoy and Bravada 2003 - current, 4.2L I6 Rainier 2004 - current, 3.5L I5 Colorado and Canyon 2004 - current, 3.5L I5 Hummer H3 2006 - current, 2.8L I4 Colorado and Canyon 2005 - current.

  • Brand: OTC
  • ASIN: B000P6UT2I
  • UPC: 731413545085

JSD Engine Crankshaft Harmonic Balancer for Chevy Sonic Cruze 1.8L 55565300

JSD Engine Crankshaft Harmonic Balancer for Chevy Sonic

Compatible Vehicles: Chevrolet Sonic 2013-2015 LS Sedan 4-Door 1.8L 1796CC 110Cu. In. l4 GAS DOHC Naturally Aspirated Chevrolet Sonic 2013-2015 LS Hatchback 4-Door 1.8L 1796CC 110Cu. In. l4 GAS DOHC Naturally Aspirated Chevrolet Sonic 2013-2015 LS Sedan 4-Door 1.8L 1796CC 110Cu. In. l4 FLEX DOHC Naturally Aspirated Chevrolet Sonic 2012-2013 LS Hatchback 4-Door 1.8L 1796CC 110Cu. In. l4 FLEX DOHC Naturally Aspirated Chevrolet Sonic 2015 LT Sedan 4-Door 1.8L 1796CC 110Cu. In. l4 GAS DOHC Naturally Aspirated Chevrolet Sonic 2013 LT Hatchback 4-Door 1.8L 1796CC 110Cu. In. l4 GAS DOHC Naturally Aspirated Chevrolet Sonic 2012 LTZ Sedan 4-Door 1.8L 1796CC 110Cu. In. l4 FLEX DOHC Naturally Aspirated Chevrolet Sonic 2012 LTZ Hatchback 4-Door 1.8L 1796CC 110Cu. In. l4 FLEX DOHC Naturally Aspirated Chevrolet Sonic 2012 LT Sedan 4-Door 1.8L 1796CC 110Cu. In. l4 FLEX DOHC Naturally Aspirated Chevrolet Sonic 2012 LT Hatchback 4-Door 1.8L 1796CC 110Cu. In. l4 FLEX DOHC Naturally Aspirated Chevrolet Cruze 2012-2014 LT Sedan 4-Door 1.8L 1796CC 110Cu. In. l4 GAS DOHC Naturally Aspirated Chevrolet Cruze 2011-2014 LS Sedan 4-Door 1.8L 1796CC 110Cu. In. l4 FLEX DOHC Naturally Aspirated Chevrolet Cruze 2011-2014 LS Sedan 4-Door 1.8L 1796CC 110Cu. In. l4 GAS DOHC Naturally Aspirated Chevrolet Cruze 201...

  • Brand: JSD AUTO PARTS
  • ASIN: B07QDX5LV8

Professional Products 80000 6-3/4" Harmonic Damper

Professional Products 80000 6-3/4" Harmonic

This damper for internally balanced small block Chevys is 6-3/4" in diameter and approximately 1-1/8" thick. This damper is dimensionally identical to the stock G.M. 6-3/4" damper. It has 60 degrees of timing marks.

  • Brand: Professional Products
  • ASIN: B001Q6GSYY
  • UPC: 665053800009

PIONEER Harmonic Balancer Damper+BOLT compatible with Chevy SB 383 400 8" EXTERNAL

PIONEER Harmonic Balancer Damper+BOLT compatible with Chevy SB

This listing is for a Pioneer OE-Replacement balancer (damper) and bolt for early model Chevrolet small block 400ci V-8 engines. P/N DA-400 + 859012. Balancer specifications are as follows (all measurements are in inches): ENGINE BALANCE: External SAFETY RATING: Not SFI approved DEGREE MARKINGS: Yes OUTSIDE DIAMETER: 7.99" MATERIAL: Nodular iron CONSTRUCTION: Elastomer FINISH: Black painted CRANK BORE: 1.24" NOSE DIAMETER: 1.88" WEIGHT: 10.77 lbs. OVERALL WIDTH: 2.34"

  • Brand: IE PARTS GROUP
  • ASIN: B07MZDSLCN

Powerbond Balancers PB2221-N 7" Steel Harmonic Balancer for Small Block Chevy

Powerbond Balancers PB2221-N 7" Steel Harmonic Balancer for

Power Bond Balancers PB2221-N SBC 7in Steel Harmonic Balancer - Non-SFI. Product Dimension (LxWxH): 8.2x8.75x2.95.

  • Brand: Powerbond Balancers
  • ASIN: B003NECOL8
  • UPC: 191215036837

Professional Products (90000) 6-3/4" Harmonic Damper for 350 Small Block Chevy

Professional Products (90000) 6-3/4" Harmonic Damper for 350

These Professional Products SFI Spec Power Force Plus dampers provide more applications for a wider range of engines. All Professional Products Power Force Plus dampers feature a bonding process, which adheres the elastomer to the inner diameter of the inertia ring and the outer diameter of the hub. Through subsequent research and development, Professional Products has perfected a new process that utilizes a stronger adhesive, along with an improved elastomer, to create a much stronger bond. Professional Products dampers all feature clear, white, easy-to-read timing marks against a painted black background. In addition, they engrave a mark every 90 degrees, which is also painted white (90 degree marks are not on small block Ford dampers). You won't find any dampers that are more accurately balanced or more closely machined for the correct fit than the Powerforce or Powerforce Plus line of high performance street or SFI Spec racing harmonic dampers.

  • Brand: Professional Products
  • ASIN: B001Q6EHCO
  • UPC: 665053900006

Dorman 594-002 Harmonic Balancer

Dorman 594-002 Harmonic

Durable and sleek, Dorman Harmonic Balancers feature a stress-resistant rubber bond that withstands the damaging effects of heat, salt, ozone and general wear and tear. The ductile steel construction allows for improved tensile and impact strength, safeguarding the engine and maintaining fuel efficiency year after year. Dorman Harmonic Balancers undergo detailed dimensional checks of the full assembly and critical components to ensure the strength and integrity of the part.

  • Color: Black
  • Brand: Dorman
  • ASIN: B000C14FCQ
  • UPC: 019495018476

Powerbond Balancers PB1018-N 8" Steel Harmonic Balancer for Big Block Chevy

Powerbond Balancers PB1018-N 8" Steel Harmonic Balancer for

Power Bond Balancers PB1018-N BBC 8IN STEEL HARMONIC. 454 EXTERNAL BALANCE.

  • Brand: Powerbond Balancers
  • ASIN: B003NEG1WG
  • UPC: 191215100835

Assault Racing Products 8042780 8" Big Block Chevy Harmonic Damper Internal Balance BBC 396 427

Assault Racing Products 8042780 8" Big Block Chevy

This damper is unique in our line in one respect, it is the only damper not made to the original factory diameter. The original 396/427 dampers were 7" in diameter from G.M. When the 454 came out, G.M. switched to an 8-inch damper. We elected to use the 8-inch diameter on our 396/427 model to maintain consistency and also because we use these dampers in conjunction with a bolt-in counterweight to create the 454/502 model. Although we list this as a 396/427 damper, it will also work on any displacement big block engine that has a neutral balance rotating assembly. These dampers feature 60° of easy to read timing marks plus engraved marks each 90 degrees of the circumference.

  • Brand: Assault Racing Products
  • ASIN: B071KGTD2W

Mr. Gasket 945G Harmonic Balancer Bolt Kit

Mr. Gasket 945G Harmonic Balancer Bolt

Mr. Gasket Small Block Chevy Harmonic Balancer Bolt Kits feature a high hex head that prevents socket slippage when adjusting valves or rotating the engine to degree in a cam. Designed specifically for small-block Chevys and heat-treated to Grade 8 specs, these bolt sets come with extra-thick parallel-ground washers that deliver a smoother, more accurate, more uniform torque. They're ideal for high-performance, drag race, and circle-track applications and come complete with split lock washers to prevent any loosening caused by vibration.

  • Color: Black
  • Brand: Mr. Gasket
  • ASIN: B000C6UTYE
  • UPC: 084041009451

Assault Racing Products 8040080 8" Small Block Chevy Harmonic Damper External Balance SBC 400

Assault Racing Products 8040080 8" Small Block Chevy

This damper is intended for use on externally balanced 383 or 400 small block Chevy engines. They feature a bolt-in counterweight which can be removed for neutral balance applications. These dampers are identical to the ARC 8035080 also include the bolt-in counterweight. This damper has 60° of easy to read timing marks and engraved marks every 90 degrees. These are ideal dampers for high performance street or racing applications, and their somewhat heavier weight provides maximum damping characteristics. These dampers are a perfect damper for high performance street applications, are extremely reasonably priced and yet are very high quality.

  • Brand: Assault Racing Products
  • ASIN: B071GVTX7L

GM Specialty 141728 Harmonic Balancer Cover 8.0" Black w/Bowtie Logo for 1955-2004 Chevrolet Small Block V-8

GM Specialty 141728 Harmonic Balancer Cover 8.0" Black

8 Black Harmonic Balancer Cover for Chevy small-block enginesThese patented harmonic balancer covers offer improved readability, more stable Top Dead Center indication and timing accuracy, enhanced appearance for a previously ignored underhood area, and the elimination of timing tapes which are inevitably flung off. They are available in chrome and black, resulting in parts with the appearance of $200 balancers.Each cover is distinctively marked with the famous Bowtie Emblem, Top Dead Center and the proper timing degrees. Using this cover improves timing accuracy because over time the etched outer inertia ring of a typical harmonic balancer may slip in relation to the center hub of the balancer, causing the etched markings to provide an inaccurate indication of Top Dead Center for the #1 piston. Mounted directly through the center hub, this cover eliminates the affect of any outer inertia ring slippage. Aluminum. U.S. Patent 5,675,078.

  • Color: Black
  • Brand: ProForm
  • ASIN: B000BRFFV6
  • UPC: 037995817283
Similar Harmonic Balancer Chevy Results
Harmonic Balancer Chevy Video Results
           

Harmonic Balancers, What They Do and How They Fail

Harmonic Balancer Chevy

MotorWeek's Pat Goss & RockAuto.com's Tom Taylor discuss what harmonic balancers do and how they sometimes fail.

Tags: harmonic balancer,damper,engine damper,replace ...

Harmonic Balancer Removal & Installation

Harmonic Balancer Chevy

Watch as Budget Build Garage replaces a harmonic balancer on a big block chevy. This isn't just installing a harmonic balancer, but a true lesson using the proper Harmonic Balancer Installation Tool to install a harmonic balancer on a big block. Watching this video will help you understand the b...

Tags: how to install a harmonic balancer,How To Insta...

How To Remove Any Harmonic Balancer "IN 5 MINUTES OR LESS" Chevy Truck 350/5.7L

Harmonic Balancer Chevy

How To Remove Any GM Harmonic Balancer in 5 minutes or less. Watch this video for the universal trick that will save your crank threads and help you remove Chevy 350 Harmonic Balancer in less then 5 minutes "The Quick and Dirty Way!" This time we did not edit the removal of this balancer! Follow...

Tags: how to remove a gm harmonic balancer,how to rem...