C4 Corvette Rear Window Hatch Vent Coupe Fits: 84 through 96 Coupe Corvettes

C4 Corvette Rear Window Hatch Vent Coupe Fits:

Our heavy duty Corvette Rear Hatch Vent is your ticket to better ventilation without wind turbulence. This sledgehammer-tough die cast unit is field tested to ensure durability and security. You'll find cruising is a breeze after only a few seconds; just pop the hatch and tighten the Corvette Rear Hatch Vent in place with your factory equipped roof panel wrench and you will have 1.5" inch gap at the rear hatch. This unit will not affect your alarm system or interior lights leaving them operational as before. Drive with or without your targa top installed. Will keep your cockpit at least 10 degrees cooler. Fits the coupe only C4 Corvette 1984 through 1996. Installation or removal takes less then 30 seconds and will require your stock targa panel wrench.

  • Color: Black
  • Brand: MIDWEST CORVETTE
  • ASIN: B00FE8DR62
  • UPC: 615953591163

Heng's J294X22WH Jensen Escape Hatch - 22" x 22"

Heng's J294X22WH Jensen Escape Hatch - 22" x

Heng's Jensen Escape hatches fit select Heng's models. Check part numbers or consult your authorized dealer to ensure proper fit to your RV.

  • Color: Regular
  • Brand: Heng's
  • ASIN: B0027XIKYQ
  • UPC: 811878011360

Heng's 48621-C2-ES RV Roof Escape Hatch Cut-Out 19 1/4" x 26 1/4"

Heng's 48621-C2-ES RV Roof Escape Hatch Cut-Out 19

Escape Hatch by Heng's Part # 48621-C2 ROUGH CUT-OUT OPENING DIMENSIONS (this is the hole you will need in your unit) 19 1/4" X 26 1/4" EXTERIOR MOUNTING FLANGE DIMENSIONS (sits on the top of your unit) 21" X 28" ROUGH LID MEASUREMENTS 19 1/2" x 26 3/8" LID COLOR Opaque White You can not see through the lid HINGE "C" or Curl Style Hinge SCREEN Screen Strong, Fine mesh ALUMINUM EXTRUSION FRAME doesn't rust QUICK RELEASE LATCH you can exit through the roof of your unit in a fire or other emergency requiring an alternate exit NO MOUNTING HARDWARE you must provide screws and caulk / putty tape YOU CAN NOT MIX ESCAPE HATCH BRANDS Ventline escape hatches sizes and hinge assembly are NOT the same as Heng's or Jensen/Elixir brand and DO NOT FIT.

  • Color: Opaque White
  • Brand: Heng's
  • ASIN: B07G28NSHR
  • UPC: 671065514674

Heng's 17511-C1G Escape Hatch/Exit Vent, 9" x 9" - Colonial White

Heng's 17511-C1G Escape Hatch/Exit Vent, 9" x 9"

This convenient 9″ x 9″ lightweight vent is ideal for providing fresh air in small places such as bathrooms, passageways, galleys, etc. This mini vent is weatherproof due to the quality high-impact plastic used in its construction. Includes 7/8″ plastic garnish.

  • Brand: Heng's
  • ASIN: B0027XEKMW
  • UPC: 811878010035

Heng's 66621-C2 Escape Hatch/Exit Vent with Aluminum Frame - 22" x 22"

Heng's 66621-C2 Escape Hatch/Exit Vent with Aluminum Frame

Fresh air ventilation: a turn of the crank provides a large vent area, lets air through, and keeps insects out. The sturdy frame installs easily and is made of heavy aluminum extrusion to assure secure mounting. Dependable operation featuring leak-resistant lid and weather-tight frame. Includes opaque white plastic lid and white garnish.

  • Brand: Heng's
  • ASIN: B002NKZZ4G
  • UPC: 811878010400

Camco RV Roof Vent Cover, Opens For Easy Cleaning, Aerodynamic Design, Easily Mounts to RV With Included Hardware - (White) (40431)

Camco RV Roof Vent Cover, Opens For Easy

The Camco Vent Cover is designed to allow fresh air ventilation and light into your RV, rain or shine. It offers high flow ventilation in an aerodynamic design. Can be installed easily by mounting to the existing 14" x 14" roof vent. Vent cover made of rugged UV stabilized resin with removable louvers for easier cleaning. Mounting hardware included. Replacement screen available (Camco #40439).

  • Color: White
  • Brand: Camco
  • ASIN: B000BUQODG
  • UPC: 014717404310

Heng's 66621-C2-ES RV Roof Escape Hatch CUT-OUT 21 1/4" x 21 1/4"

Heng's 66621-C2-ES RV Roof Escape Hatch CUT-OUT 21

Escape Hatch by Heng's Part # 66621-C2 ROUGH CUT-OUT OPENING DIMENSIONS (this is the hole you will need in your unit) 21 1/4" x 21 1/4" EXTERIOR MOUNTING FLANGE DIMENSIONS (sits on the top of your unit) 23" x 23" ROUGH LID MEASUREMENTS 21 1/2" x 21 1/2" LID COLOR Opaque White You can not see through the lid HINGE "C" or Curl Style Hinge SCREEN Screen Strong, Fine mesh ALUMINUM EXTRUSION FRAME doesn't rust QUICK RELEASE LATCH you can exit through the roof of your unit in a fire or other emergency requiring an alternate exit NO MOUNTING HARDWARE you must provide screws and caulk / putty tape YOU CAN NOT MIX ESCAPE HATCH BRANDS Ventline escape hatches sizes and hinge assembly are NOT the same as Heng's or Jensen/Elixir brand and DO NOT FIT.

  • Brand: Heng's
  • ASIN: B07G1HZS9W
  • UPC: 671065514698

FHelectronic 6-Inch Marine Deck Plate Round Non-Slip Boat Cabin Vents Hatch Screw-in Deck Plate with Removable Cover ABS Plastic Deck Fittings (Black)

FHelectronic 6-Inch Marine Deck Plate Round Non-Slip Boat

Description: Material: Durable ABS Plastic Portable rotation installation UV resistant, anti-aging Vertical installation and horizontal installation Twist/screws out easily Specification: Round Utility Hatch 6" Inner Diameter: 151mm /6" Outside Diameter: 198mm / 7.8" Net Opening: 6" Cut Hoe Size: 6.3" Package Includes: 1 Piece Deck Plate Note: Please allow a little size error due to manual measurement. Please be reminded that due to lighting effects and monitor's brightness/contrast settings etc, the item's color may be slightly different from the pictures. Please understand.

  • Color: black
  • Brand: FHelectronic
  • ASIN: B07P6L4FNJ

Heng's 31121-C2-ES RV Roof Escape Hatch CUT-OUT 14 1/4" x 21"

Heng's 31121-C2-ES RV Roof Escape Hatch CUT-OUT 14

Escape Hatch by Heng's Part # 31121-C2 ROUGH CUT-OUT OPENING DIMENSIONS (this is the hole you will need in your unit) 14 1/4" X 21" EXTERIOR MOUNTING FLANGE DIMENSIONS (sits on the top of your unit) 16 3/4" X 23 3/4" ROUGH LID MEASUREMENTS 15 1/2" x 22 1/2" LID COLOR Opaque White You can not see through the lid HINGE "C" or Curl Style Hinge SCREEN Screen Strong, Fine mesh PLASTIC FRAME this model only QUICK RELEASE LATCH you can exit through the roof of your unit in a fire or other emergency requiring an alternate exit NO MOUNTING HARDWARE you must provide screws and caulk / putty tape YOU CAN NOT MIX ESCAPE HATCH BRANDS Ventline escape hatches sizes and hinge assembly are NOT the same as Heng's or Jensen/Elixir brand and DO NOT FIT.

  • Brand: Heng's
  • ASIN: B07G1H2BFN
  • UPC: 671065514681

Heng's (68631C2 26" x 26" Exit Vent

Heng's (68631C2 26" x 26" Exit

HENG'S 68631-C2 ESCAPE HATCH 26 X X26

  • Brand: Heng's
  • ASIN: B007HRIECU
  • UPC: 050391727666
Similar Hatch Vent Results
Hatch Vent Video Results
           

C4 Corvette Rear Hatch Vents

Hatch Vent

Quick video to talk about the C4 Corvette Rear Hatch Vents. The different styles and the Pro's & Con's as well as what I use and why. My vent of choice is the EZ Vent from "The Corvette Gadget Man"...who is now retired!!!! Booooooooooooooo

Tags: corvette,1992,1993,1994,1995,1996,lt1,lt4,zr1,l...

1994 C4 Corvette Hatch Vent: PSA 2019

Hatch Vent

In this video I discuss my issues with the only remaining Vent Hatch left on the market. Allow me to apologize up front, this video is longer than I'd prefer so Thank You for taking the time to view this. The Hatch Vent portion of this video ends at 16:00...the remaining time is an off-topic ra...

Tags: corvette,1992,1993,1994,1995,1996,lt1,lt4,zr1,l...

Installing Vents To My Silvia Hood Part 1

Hatch Vent

Huge shoutout to Kove for sponsoring todays video, get a great deal on the Kove Commuter portable speaker using my link: https://www.koveaudio.com/vule65. Discount will be automatically applied during checkout. New hood vent came in thanks to fineline tuning, can't wait to install this to the 24...

Tags: s13,illiminate,adam lz,tj hunt,dustin williams,...