Holley 134-101 Standard Replacement Primary Fuel Bowl Kit

Holley 134-101 Standard Replacement Primary Fuel Bowl

This replacement fuel bowl is a primary bowl with a side hung float style. It also has a provision for accelerator pumps and transfer tubes.

  • Brand: Holley
  • ASIN: B00029JC8A
  • UPC: 090127025192

Holley 4150 Aluminum Float Bowl Kit

Holley 4150 Aluminum Float Bowl

These lightweight aluminum center-hung fuel bowls have glass sight windows for easy float adjustments. They fit Proform, Quick Fuel and Holley double pumper carburetors.Kit includes two fuel bowls, gaskets and anodized fuel inlets.

  • Brand: Speedway Motors
  • ASIN: B01N7WG2S5

Holley 134-281 Replacement Fuel Bowl Kit

Holley 134-281 Replacement Fuel Bowl

The Holley replacement fuel bowl kit is designed for the primary fuel bowl with non-adjustable needle and seat.

  • Brand: Holley
  • ASIN: B000M2AOAW
  • UPC: 090127605233

Holley 134-101S Replacement Fuel Bowl

Holley 134-101S Replacement Fuel

This replacement fuel bowl is a primary bowl with a side-hung float style and provisions for accelerator pumps and transfer tubes.

  • Brand: Holley
  • ASIN: B00062ZF6Q
  • UPC: 090127422830

Holley 134-112 Replacement Fuel Bowl

Holley 134-112 Replacement Fuel

This fuel bowl is designed as an exact replacement and requires no modifications for installation. It comes in a dichromate finish and does not include gaskets or floats.

  • Brand: Holley
  • ASIN: B000CMJMPA
  • UPC: 090127025314

Holley 134-102S Replacement Fuel Bowl Kit

Holley 134-102S Replacement Fuel Bowl

The Holley replacement fuel bowl kit is for secondary fuel bowl with center hung float with fuel inlet provision.

  • Brand: Holley
  • ASIN: B00062ZET4
  • UPC: 090127422847

Holley 34R10918AQ Marine Fuel Bowl

Holley 34R10918AQ Marine Fuel

This marine fuel bowl has a side-hung float design and accepts only non-adjustable needle and seat assemblies. It is a primary fuel bowl with a transfer tube provision and the fuel inlet located off the side wall.

  • Brand: Holley
  • ASIN: B000CMJN18
  • UPC: 090127604892

Holley 108832 Blue Fuel Bowl Gasket - Pack of 2

Holley 108832 Blue Fuel Bowl Gasket - Pack

These fuel bowl gaskets are designed to replace worn-out gaskets that may cause a leak and allows fuel line plumbing from either side of the bowl. They are made of Buna rubber and come in blue.

  • Brand: Holley
  • ASIN: B00029J4T2
  • UPC: 090127425237

Holley 26-13 Sight Plug

Holley 26-13 Sight

This sight plug allows you to check and adjust the float bowl level without removing the plug and spilling fuel. It is made of brass and includes sight plug O-rings and a gasket.

  • Brand: Holley
  • ASIN: B00029JFGO
  • UPC: 090127043875

Holley 26-124 Fuel Bowl Screw & Gasket Kit

Holley 26-124 Fuel Bowl Screw & Gasket

The Holley fuel bowl screw and gasket kit is made to be reusable and durable to meet your needs.

  • Brand: Holley
  • ASIN: B00062ZF02
  • UPC: 090127431726

Holley 108-98-10 Fuel Bowl Screw Gasket - Pack of 10

Holley 108-98-10 Fuel Bowl Screw Gasket - Pack

These fuel bowl screw gaskets are designed to replace worn-out gaskets that may cause a leak. They are made of nylon and come in a pack of 10

  • Brand: Holley
  • ASIN: B00029J4V0
  • UPC: 090127437100

Holley 34-7 Needle and Seat Hardware Kit

Holley 34-7 Needle and Seat Hardware

This needle and seat hardware kit will fit center-hung fuel bowls. It includes an adjusting nut, a locking screw with a gasket, and an O-ring.

  • Brand: Holley
  • ASIN: B00029JHGW
  • UPC: 090127055892

Holley 26-113 Sight Plug

Holley 26-113 Sight

This sight plug allows you to check and adjust the float bowl level without removing the plug and spilling fuel. It is made of clear plastic and includes sight plug O-rings.

  • Brand: Holley
  • ASIN: B00029JFGE
  • UPC: 090127427637

Holley 134-71S Tumble Polished Aluminum Carburetor Fuel Bowl Kit

Holley 134-71S Tumble Polished Aluminum Carburetor Fuel Bowl

Holley Aluminum V-bowls are offered in three different configurations; primary, secondary with accelerator pump provisions, and secondary without accelerator pump provisions. These different options allow you to convert anything from your old 3310 to a Dominator to aluminum fuel bowls. Holley's new Aluminum V-bowls feature a clear, glass sight window for easy, safe fuel level adjustments. They also include all necessary gaskets and fuel bowl screws for a quick installation. The best part is replacing your old Zinc fuel bowls with the Aluminum versions will save you over 1.2 pound of weight on top of your engine.

  • Brand: Holley
  • ASIN: B003LBF5YQ
  • UPC: 090127663783

Holley 116-15 Secondary Wedged Float with Main Jet Extensions

Holley 116-15 Secondary Wedged Float with Main Jet

A wedged float is a necessity for the circle racer. The wedge is designed so that when you are in a turn, and the fuel has sloshed up the side of the bowl, the fuel will ride up the wedge and allow the float to stay open and not close off prematurely. Holleys new wedged floats also feature a new reinforced float bracket assembly that allows more fuel to flow thru the bracket especially when using a bottom feed needle and seat. Made from Nitrophyl, the new Holley wedged floats weigh in at approximately 12.8 to 13.2 grams and are available as a primary float, secondary float with notches for jet extensions and a secondary float with notches that includes the jet extensions. Nitrophyl is a registered trademark of the Rogers Corporation.

  • Brand: Holley
  • ASIN: B002G1USVM
  • UPC: 090127662069

Holley 134-281S Carburetor Float Bowl Cover Gasket

Holley 134-281S Carburetor Float Bowl Cover

Replacement Fuel Bowl Kit.

  • Brand: Holley
  • ASIN: B000IX3E20
  • UPC: 090127605240

Holley 116-4 Side Hung Float

Holley 116-4 Side Hung

This side hung float is specifically designed for 2-barrel and 4-barrel carburetors that run on alcohol. The float arm is attached to the side and is hung or pivoted from the side of the float bowl. It is made from brass and is interchangeable.

  • Brand: Holley
  • ASIN: B00029WXNG
  • UPC: 090127019870

Holley 0-1850S Model 4160 Street Performance 600 CFM Square Bore 4-Barrel Vacuum Secondary Manual Choke New Carburetor

Holley 0-1850S Model 4160 Street Performance 600 CFM

This carburetor is ideal for street performance and features a Next Gen needle and seat design which eliminates the need for external float level adjustment. It has side-hung floats which are factory-set for optimum fuel levels at 3 to 6 PSI with no adjustment necessary. The float bowls, main bodies, and vacuum secondary caps have a refined appearance and upgraded choke caps are included for smoother engine warm-up and better cold drivability.

  • Brand: Holley
  • ASIN: B00029J3Y8
  • UPC: 090127420072

Holley HOL 37-119 Carburetor Renew Kit

Holley HOL 37-119 Carburetor Renew

This carburetor renew kit brings marine carburetors back to original specs and like-new condition. It includes all of the necessary gaskets, O-rings, pump diaphragms, needles and seats, power valves, detailed instructions, and hardware for a complete rebuild.

  • Brand: Holley
  • ASIN: B00029JHH6
  • UPC: 090127059173

Holley 134-282 Carburetor Float Bowl Cover Gasket

Holley 134-282 Carburetor Float Bowl Cover

Replacement Fuel Bowl Kit.

  • Brand: Holley
  • ASIN: B000IX59E6
  • UPC: 090127605257
Similar Holley Float Bowl Results
Holley Float Bowl Video Results
           

How To Adjust Fuel And Float Level On Holley Carbs

Holley Float Bowl

Holley demonstrates how to properly adjust the fuel level and the float on Holley four-barrel carburetors.

Tags: float adjustment,holley carburetors,holley carb...

Holley 750 cfm 4150 Rebuild A to Z with a Percy's Adjust-A-Jet Addition Vacuum Secondary

Holley Float Bowl

Pretty typical vacuum secondary Holley rebuild. Newer Holley carbs come with power valve blow out protection. This is a old carb.

Tags: Holley,carb,rebuild,carburetor,double,pumper,va...

holley float bowl and jet removal tips

Holley Float Bowl

I'm pretty illiterate when it comes to speaking on camera. REMOVING FLOAT BOWL When removing the bowl be sure to pry off of the pump arm diaphragm housing. If you stick a screwdriver between the bowl and metering block, you will destroy your gasket and year sealing line on the bowl. REMOVING ...

Tags: Holley carb tuning basics,holley float bowl,hol...