Edelbrock 2701 Performer Intake Manifold

Edelbrock 2701 Performer Intake

The Edelbrock Performer Intake Manifold delivers superior performance with square-bore carburetors. Horsepower gains from idle to 5, 500 RPM, when used with Performer Series square-bore or Thunder Series AVS carburetors. Dyno tests show that the power gains an extra 5 horsepower, 9 foot / pounds and torque across the entire RPM range over their own performer manifolds.

  • Brand: Edelbrock
  • ASIN: B00063046Q
  • UPC: 085347027019

Holley 300-137 LS1/LS2/LS6 Single Plane Intake Manifold

Holley 300-137 LS1/LS2/LS6 Single Plane Intake

Holley is an industry leader when it comes to GM Gen III and IV LS engine performance parts. Their LS Single Plane Mid-Rise Intake Manifolds are now available for both carbureted and EFI applications. They are ideal for higher horsepower engines as well as those that are incorporating power adders such as forced induction or nitrous oxide. Thanks to Holley's advanced casting technology, these intakes weigh in at only 11.5 lbs. The runner design of the intake manifold features a constant cross sectional area and is ideal for a broad power band from 2,500-7,000 RPM. They feature consistent wall thickness throughout for balanced performance and sealing strength. This excellent design also features the lowest carb mounting flange height possible without sacrificing any power. Features: Designed for performance minded LS engines with a 2,500-7,000 rpm power band Cast aluminum construction with consistent wall thickness throughout and strong mounting flanges Constant cross sectional area produces a broad torque curve Accepts a carburetor/throttle body with a Holley 4150 square bore flange Available with machined ports for EFI installation, no fabrication required The lowest carb flange height possible for improved hood clearance Matching black anodized billet fuel rails ava...

  • Brand: Holley
  • ASIN: B000746JSQ
  • UPC: 090127687758

Empi Single Cast Manifold 40-52Idf, Dune Buggy Baja Bug

Empi Single Cast Manifold 40-52Idf, Dune Buggy Baja

Intake manifold for Weber IDF or EMPI HPMX Carburetors These manifolds are used with standard 2 bbl carb that utilizes simutaneous throttle activation. Increased low end power and acceleration provide added pep for all purposes. Supplied with gaskets. Zinc platedIntake Manifold For Weber Idf & HPMX Carbs Single Carb

  • Brand: Empi
  • ASIN: B003KKFA98
  • UPC: 707924221732

Assault Racing Products PC2031 Small Block Chevy Single Plane High Rise Satin Aluminum Intake 3000-7500+ RPM SBC

Assault Racing Products PC2031 Small Block Chevy Single

This is a new satin aluminum high rise single plane intake for small block Chevy. Big power for mid to upper RPM ranges! Ideal for high performance and race applications. These intakes are produced from steel molds to reduce core shift, have all the major features found on the expensive ones such as 4 corner water outlets and nitrous bosses, and the best part - the price! Intake works with 283-400 small blocks up to 1995. Does not fit the newer Vortec heads. For use with square bore style carbs. Provides standard bosses and tapped holes for street accessories such as A/C and alternator brackets. No provision for manual choke or exhaust crossover. Not EGR equipped. Manifold Specifications: Part Number: PC2031 RPM Range: 3000 - 7500+ Intake Port Dimensions: 1.80" x 1.11"*1 Manifold Height: 6.06" NOTE (1) - port is intentionally left small to allow for porting/gasket matching Features: Satin Finish 360° single plane high rise design for outstanding power from 3000 to 7500+ RPM Cast-in bosses on intake runners, can be drilled and tapped for use with nitrous injectors Square bore carb bolt pattern for the Holley 4150/4160 style carburetor Ideal port position - allows custom porting for maximum power Dual distributor hold-down provisions for extra protection against distributor rot...

  • Color: Satin
  • Brand: Assault Racing Products
  • ASIN: B00S75GIP6

Edelbrock 7116 INTAKE MANIFOLD

Edelbrock 7116 INTAKE

The Edelbrock Performer RPM Vortec Intake Manifold is a single four-barrel intake which is designed for the street rod, marine and engine swap market engines and later Vortec cast iron or the Edelbrock E-Tec aluminum heads. An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines. This broad power band makes Performer RPM ideal for street or strip. The manifold accepts square-bore carburetor only. They are intended for high-performance street and marine engines operating from idle-5, 500 RPM. The Performer RPM manifolds match Performer RPM camshaft and cylinder heads for outstanding performance.

  • Brand: Edelbrock
  • ASIN: B00062Z2Y6
  • UPC: 085347071166

Edelbrock 7501 INTAKE MANIFOLD

Edelbrock 7501 INTAKE

The Edelbrock Performer RPM Air-Gap Intake Manifold is manufactured from aluminum and given a natural finish. The exclusive Air-Gap design features an open space between the intake runners and the hot engine oil resulting in a cooler, denser charge and more power. The runners are tuned up to move the power band 1, 000 RPM higher than Performer Air-Gap manifolds, from idle-5, 500 RPM up to 1, 500-6, 500 RPM. It also features nitrous bosses, rear water outlets and two distributor clamp locations.

  • Brand: Edelbrock
  • ASIN: B000CN9164
  • UPC: 085347075010

Speedmaster PCE147.1027 Shootout Plus Intake Manifolds, Carbureted

Speedmaster PCE147.1027 Shootout Plus Intake Manifolds,

Shootout +Plus High Rise Intake Manifold1957-95 Small Block Chevy 350Height: 6.060"Non-EGRRPM Range: 3000-7500Natural Finish

  • Brand: Speedmaster
  • ASIN: B00SYF7BRI
  • UPC: 012933017628

URO Parts 272 140 2401R-PRM Intake Manifold Repair Kit

URO Parts 272 140 2401R-PRM Intake Manifold Repair

URO 272 140 2401R-PRM Intake Manifold Adjuster Repair KitNo Core Charge RequiredParts Interchange 2721402401RPRM, 272 140 24 01R PRM, 14433056738, 144 33056 738

  • Brand: URO Parts
  • ASIN: B01AWXZY8W
  • UPC: 847603067944

Edelbrock 7121 INTAKE MANIFOLD

Edelbrock 7121 INTAKE

The Edelbrock Performer RPM 302 Intake Manifolds are dual-plane, high-rise intakes with 180 degree firing order to produce incredible top-end horsepower while retaining good throttle response. Their larger plenums and runners match the free-flowing exhaust, high-lift cams and other modifications of a high output engine. The intake manifold directs the air or air-fuel mixture from the throttle body to the intake ports in the cylinder head. The flow typically proceeds from the throttle body into a chamber called the plenum, which in turn feeds individual tubes, called runners, leading to each intake port. They are intended for high-performance street engines that run up to 6, 500 RPM. They are not for emissions equipped engines.

  • Brand: Edelbrock
  • ASIN: B00062YA94
  • UPC: 085347071210

Edelbrock 7156 INTAKE MANIFOLD

Edelbrock 7156 INTAKE

The Edelbrock Performer RPM Intake Manifold provides maximum high-RPM power while maintaining good throttle response for street applications. The Performer RPM's are dual-plane, high-rise intakes with a 180 degree firing order to produce incredible top-end horsepower while retaining good throttle response. Their larger plenums and runners match the free-flowing exhaust, high-lift cams and other modifications of a high output engine. They are intended for high-performance street engines that run up to 6, 500 RPM. They are not for emissions equipped engines. The factory composition-type embossed gasket also works satisfactorily. It delivers maximum power with a broad torque curve for high-performance street applications. This manifold has no provisions for exhaust heated or stock-style choke.

  • Brand: Edelbrock
  • ASIN: B00062YAA8
  • UPC: 085347071562

Dorman 615-375 Upper Intake Manifold with Molded Throttle Body

Dorman 615-375 Upper Intake Manifold with Molded Throttle

Intake Manifolds transfer fuel and air mixtures to the cylinder. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.

  • Color: Ready To Paint If Needed
  • Brand: Dorman
  • ASIN: B00QSLNG2O
  • UPC: 019495456162

Holley 300-256BK Holley Single Plane Split-Design Race Intake Manifold- GM LS1/LS2/LS6- Black

Holley 300-256BK Holley Single Plane Split-Design Race Intake

The new Holley Single-Plane Race intake manifold were designed with performance in mind. They feature a race bred, two piece split feature that was previously only found on the most expensive race intakes. The manifold will fit GM LS Gen III engines with cathedral port heads and are intended for 4150 style square bore flanged carburetors or throttle body EFI. The LS Race single-plane intake manifold was designed for hi-performance/racing engine applications, 5.3 to 6.2+ liter displacement, and maximum engine speeds of 6000-7000 rpm, depending on the engine combination. This single-plane design provides optimal performance across the RPM spectrum while providing maximum performance up to 7000 rpm. The Holley LS Race manifold incorporates a split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, making custom porting and matching a snap. With shoulder bolt locators and O-ring seal, reassembly is simple and precise. Technical Data: ? A-B Height - 7.32" (0 degrees carb flange angle) ? Port Size- 3.28" Height x 1.10" Wide ? Carburetor Flange - Standard 4150 for up to 1-3/4" diameter throttle bores ? As-Cast Runner Cross-Sectional Area - 3.5 in^2 at the runner entry tapered to 2.9 in^2 at the flange exit

  • Brand: Holley
  • ASIN: B07SZ9VJR2
  • UPC: 090127052358

VW Beetle Bug Baja Air Cooled Single Port End Kit, Type 1, Type 2 & Type 3, 00-3237

VW Beetle Bug Baja Air Cooled Single Port

Cast aluminum ends for use with center section style manifolds with single port heads. Complete with hardware EMPI's Single Port Intake Manifold End Casting Kit allows the installation of Progressive EGAS or IDF/HPMX carburetor kits on;1966 through 1970 Beetles and Karmann Ghias as well as 1963 through 1970 Type 2 Bus models. The intake manifold kit includes the left and right single port end castings intake manifold gaskets and the intake manifold boots and clamps. Single PortSingle Port Intake End CastingS With Boots & Seals

  • Brand: Empi
  • ASIN: B00DJH0P56
  • UPC: 707924320725

(MA1) UMPARTS One Single vaccum Outlet port 30 mm Intake Manifold Pipe for 24mm PD24 Carburetor Carb for GY6 125 CC 152QMJ 150CC ATV Go Kart Moped and Scooter

(MA1) UMPARTS One Single vaccum Outlet port 30

Please compare your original stock part(s) with our listing images before purchase. If you have any problem with the package(s) you received, please contact us via email first. Thank you so much for shopping with UMPARTS.

  • Brand: 1PZ
  • ASIN: B071HYWB17

Glixal ATMT1-080 GY6 125cc 150cc Carburetor Intake Manifold Pipe for 152QMI 157QMJ Engine Chinese Scooter Moped ATV Go-Kart (Single Vaccuum Port)

Glixal ATMT1-080 GY6 125cc 150cc Carburetor Intake Manifold

1.New Products with High Quality 2.Replacement for GY6 125cc 150cc Intake Manifold Pipe 3.Glixal-Racing Team will supply parts for BAOTIAN, BASHAN, BENZHOU, CFMOTOR, CHARMING, DAYANG, DINLI, FUXIN, GEELY, GILERA, HANGLONG, HAOJIN, HAOJUE, HISUN, HONGZHOU, HUATIAN, JIAJUE, JIANSHE, JINLUN, JMSTAR, JONWAY, KAITONG, KEEWAY, KINROAD, KYMCO, LIFAN, LINGBEN, LINGTIAN, LINHAI, LINTEX, LONCIN, LONGJIA, MAWI, MEIDUO, MOTORRO, PIAGGIO, QINGQI, RHON, RIEJU, SACHS, SHINERAY, SKYGO, SUKIDA, TAOTAO, VESPA, VONROAD, WANGYE, WONJAN, XINGYUE, XINLING, XINTIAN, YIBEN, YINGANG, ZHONGYU, ZNEN, ZONGSHEN,ect

  • Brand: Glixal
  • ASIN: B01F7G9CUA
  • UPC: 717080834455

Glixal ATMT1-079 GY6 49cc 50cc Scooter Carburetor Intake Manifold Inlet Pipe for 139QMB 139QMA Engine Moped ATV Go Kart (Single Vaccuum Port)

Glixal ATMT1-079 GY6 49cc 50cc Scooter Carburetor Intake

1.New Products with High Quality 2.Replacement for GY6 50cc Intake Manifold Pipe 3.Glixal-Racing Team will supply parts for BAOTIAN, BASHAN, BENZHOU, CFMOTOR, CHARMING, DAYANG, DINLI, FUXIN, GEELY, GILERA, HANGLONG, HAOJIN, HAOJUE, HISUN, HONGZHOU, HUATIAN, JIAJUE, JIANSHE, JINLUN, JMSTAR, JONWAY, KAITONG, KEEWAY, KINROAD, KYMCO, LIFAN, LINGBEN, LINGTIAN, LINHAI, LINTEX, LONCIN, LONGJIA, MAWI, MEIDUO, MOTORRO, PIAGGIO, QINGQI, RHON, RIEJU, SACHS, SHINERAY, SKYGO, SUKIDA, TAOTAO, VESPA, VONROAD, WANGYE, WONJAN, XINGYUE, XINLING, XINTIAN, YIBEN, YINGANG, ZHONGYU, ZNEN, ZONGSHEN,ect

  • Brand: Glixal
  • ASIN: B01F7G9AUC
  • UPC: 717080834431

Big Block Chevy Single Plane Air Gap Aluminum Intake Manifold Rectangle Port BBC

Big Block Chevy Single Plane Air Gap Aluminum

This intake is designed to work with rectangle port standard deck BBC engines. This intake features high rise design and has a 3000-7500 rpm range. The air gap design allows air to flow under the plenum to prevent heat transfer from the engine resulting in more horsepower. Intake is a single plane square bore style and works with all 4150 Holley style carburetors. Ports measure 1.63" x 2.30" and intake measures 6.16" tall. Other features include four corner water outlets, dual distributor hold down provisions, accepts late model water neck, A/C, alternator and HEI brackets.

  • Brand: CCR
  • ASIN: B0748LYGDH
  • UPC: 686696916759

Weiand 7547-1 X-CELerator Intake Manifold

Weiand 7547-1 X-CELerator Intake

Weiand X-CELerator intake manifold features a single plane, 360 degree, open plenum manifold, which is designed primarily for high-performance street, drag, marine and oval track applications. With an effective RPM (Revolutions Per Minute), this series works best with a higher compression ratio, 280 degree or more of cam duration and headers with 1-5/8 primary tubes. The range of the power band of this manifold is from 2000 to 6500 RPM.

  • Brand: Weiand
  • ASIN: B000CQHTMO
  • UPC: 090127597873

Dorman 615-175 Upper Intake Manifold for Select Ford/Lincoln/Mercury Models

Dorman 615-175 Upper Intake Manifold for Select Ford/Lincoln/Mercury

More like a complete service kit than a single part. Dorman’s Intake Manifold includes all the essential components for a full repair. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.

  • Color: Black
  • Brand: Dorman
  • ASIN: B000CIXMIC
  • UPC: 194950339294

Holley 825012 Holley Sniper Fabricated Intake Manifold Single Plane Carbureted RPM Power Band 1800-7000 Black w/Sniper Logo Holley Sniper Fabricated Intake Manifold

Holley 825012 Holley Sniper Fabricated Intake Manifold Single

Holley Sniper Fabricated Manifolds use the same technology found in our cast manifolds. Sniper Intakes are an affordable intake manifold that fit many popular engine families and cylinder heads while producing excellent overall performance in many high performance and racing applications, particularly with larger displacement and/or higher RPM engines. These Fabricated manifolds also look great on street rods and show cars. These manifolds are ready to bolt on out of the box and are designed to accept Holley high flow throttle bodies and include high flow fuel rail kit (EFI manifolds only). These designs were developed using state of the art solid modeling software. Each manifold is precision fixtured and welded for a perfect fit and maximum structural integrity. Choice of TB openings 92mm & 102mm.

  • Brand: Holley
  • ASIN: B01EMSZFVO
  • UPC: 847875006603
Similar Intake Manifold Single Results
Intake Manifold Single Video Results
           

Single Plane vs Dual Plane Manifolds

Intake Manifold Single

Do you know the difference between a Single and Dual Plane intake manifold? Edelbrock is here to clear that up and make sure you have the correct manifold for your application and use.

Tags: Edelbrock,intake,intake manifold,Dual palne,Sin...

Edelbrock Intake Manifold Dyno Test :: Single Vs Dual + Air-Gap Vs Regular

Intake Manifold Single

Edelbrock single plane (Victor Jr) vs dual plane (Air-Gap) intake manifolds on the same engine in a dyno test at Westech Performance. Plus a test of the Air-Gap vs Regular dual plane intake manifolds. This is an episode I edited.

Tags: Edelbrock,Performer,RPM,Air-Gap,Air,Gap,dual,pl...

Speedway Tech Talk - Tips for Selecting an Intake Manifold

Intake Manifold Single

Speedway 1957-86 Small Block Chevy Hi-Rise Intake Manifolds (91011465) http://bit.ly/29FtSiz World Products 061040 S/B Chevy Motown Single Plane Intake Manifold (82461040) http://bit.ly/29Lpnma

Tags: