For Mitsubishi Eclipse 4-1 Design Stainless Steel Exhaust Header Kit - 2.4L I4

For Mitsubishi Eclipse 4-1 Design Stainless Steel Exhaust

The exhaust manifold found on the 2000-2005 Mitsubishi Eclipse 4 Cylinder Engines were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 off-road racing headers are designed to allow the exhaust gasses to flow more freely from each cylinder and combine in a more efficient manner. Tubing has been optimized for the 2.4L engine. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Package Included:1 x Set of Header Exhaust System, Gasket(s) and Bolt(s)(ALL if any is necessary for Installation)Compatible with:Mitsubishi Eclipse 2.4L 4CYL (2000-05)

  • Color: Polished Chrome
  • Brand: Auto Dynasty
  • ASIN: B00JA1BITC

For 95-99 Mitsubishi Eclipse 4-1 Design 2-PC Stainless Steel Exhaust Header Kit - NT 1 Gen

For 95-99 Mitsubishi Eclipse 4-1 Design 2-PC Stainless

The exhaust manifold found on the 1995-1999 Mitsubishi Eclipse, Eagle Talon and Dodge Avenger 4 Cylinder Engine were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 off-road racing headers are designed to allow the exhaust gasses to flow more freely from each cylinder and combine in a more efficient manner. Tubing has been optimized for the 2.0L non-turbo engine. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Package Included:1 x Header exhaust systemAll necessary hardware, bolts, and gaskets includedCompatible with:Mitsubishi Mitsubishi Eclipse 2.0L I4 Non-Turbo (1995-99)Eagle Talon 2.0L I4 Non-Turbo (1995-98)Dodge Avenger 2.0L I4 Non-Turbo (1995-99)

  • Color: Polished Chrome
  • Brand: Auto Dynasty
  • ASIN: B07H4HMXJV

OBX Header for 06-12 Mitsubishi Eclipse GT 3.8L V6 GT Long Tube

OBX Header for 06-12 Mitsubishi Eclipse GT 3.8L

OBX High performance racing headers are made out of pure SUS-304 stainless steel. Dyno tested at low end and top speed to increase horsepower. Precision mandrel-bend to enhance exhaust gas flow. These one piece type headers are easy to install. Value-added bolt-on headers for any racing sport performance enthusiast. Note: This is a race type header that deletes factory emissions equipment. Please check state and local laws before purchasing.

  • Brand: OBX Racing Sports
  • ASIN: B002N3F02K

4-1-1 Style Stainless Steel Exhaust Header Manifold For Mitsubishi Eclipse Dsm 2G

4-1-1 Style Stainless Steel Exhaust Header Manifold For

100% Brand New Items, Never Used Or Installed High Performance 4-1 Stainless Steel Header Kit CNC Machined T-304 Mandrel Bent Stainless Steel Piping And TIG Welded Steel Flanges Made By OEM Approved and ISO Certified Manufacturers With Materials That Meets Or Exceeds Strict OEM Requirements Direct Bolt-On Item; No Modifications Required Improves Engine Performance And Increase Horsepower By Significantly Reducing Exhaust Flow Restriction Increase High Flow Air, Instantly Gain 10 -15 Hp. / Tq. Flex Pipe Inner Diameter: 1.75 Inch Includes Pictured Hardware * O2 Simulators May Be Required If A CEL Is Triggered * No Installation Guides Are Included, We Highly Recommend To Seek Professional Installation FITMENT 1995-1999 Mitsubishi Eclipse 2.0L Non-Turbo models only 1995-1999 Dodge Avenger Models Only 1995-1999 Eagle Talon 2.0L Models Only

  • Brand: AJP Distributors
  • ASIN: B012FYLBVU

Spec-D Tuning HH2-ELP95-DK Mitsubishi Eclipse Avenger Talon 2.0L Non Turbo Dynamik Header

Spec-D Tuning HH2-ELP95-DK Mitsubishi Eclipse Avenger Talon 2.0L

Brand new in original packaging. Exactly the same as shown in the picture! Made of high quality T-304 stainless steel. 4-1 racing flow design. Super light weight. Direct bolt on design. Gains instant 10-15 horsepower. Do not come with installation instruction. Professional installation highly recommended. Fitment : 95-99 Mitsubishi Eclipse NON TURBO models only. 95-99 Dodge Avenger 95-99 Eagle Talon 2.0L

  • Brand: Spec-D Tuning
  • ASIN: B0019BUNSI
  • UPC: 841808115134

DNA Motoring HDSME95NT Stainless Steel Exhaust Header Manifold

DNA Motoring HDSME95NT Stainless Steel Exhaust Header

Getting more air into your engine and more exhaust out is the key to a performance motor. That's where exhaust headers is significant as the first revenue of an exhaust system. Exhaust performance headers manipulate the air flow with the performance-robbing exhaust manifold that came with your car. Headers provide each cylinder with its own mini exhaust pipe, which means exhaust headers prevent interference among cylinders, thus, the backpressure that occurs in common exhaust manifolds. When cylinders don't have to fight with each other to expel their exhaust, they can put more power through the wheels, pushing the vehicle. Combining with a high performance cold air intake, and a cat-back exhaust system, a header system removes all restrictions of your engine, then, it is able to perform at its full potential. Compatible with: Fits all small block Chevy v8 engines from '55+ using the standard exhaust pattern - 283, 305, 327, 350, 400,... Etc. This product is compatible with: Mitsubishi Mitsubishi eclipse 2.0l i4 non-turbo (1995-99) / eagle talon 2.0l i4 non-turbo (1995-98) / dodge avenger 2.0l i4 non-turbo (1995-99).

  • Color: Polished
  • Brand: DNA MOTORING
  • ASIN: B01MZH14GS
  • UPC: 850711007139

For Mitsubishi Eclipse 4G 2.4L Stainless Steel 4" Burnt Tip Catback Exhaust System

For Mitsubishi Eclipse 4G 2.4L Stainless Steel 4"

Upgrading vehicle's exhaust system is a great way to build horsepower, free up trapped torque, and improve upon restrictive factory systems. The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make a world of difference on your vehicle. The net result is lower auto exhaust backpressure, more horsepower, more torque, and a much better sound.Package Included:1 x Catback Exhaust SystemCompatible with:06-09 Mitsubishi Eclipse 2.4L l4

  • Brand: Auto Dynasty
  • ASIN: B01LI5H3GE

For Mitsubishi Eclipse Catback Exhaust System 4" Burn Tip Muffler - 3 Gen V6

For Mitsubishi Eclipse Catback Exhaust System 4" Burn

Upgrading vehicle's exhaust system is a great way to build horsepower, free up trapped torque, and improve upon restrictive factory systems. The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make a world of difference on your vehicle. The net result is lower auto exhaust backpressure, more horsepower, more torque, and a much better sound.Package Included:1 x Catback Exhaust SystemCompatible with:00-05 Mitsubishi Eclipse V6

  • Color: Burn Tip
  • Brand: Auto Dynasty
  • ASIN: B00KFSSTGE

cciyu Stainless Steel Exhaust Manifold Kit Fits 01-05 Mitsubishi Eclipse

cciyu Stainless Steel Exhaust Manifold Kit Fits 01-05

Fit for:2001-2005 Mitsubishi Eclipse Spyder GS Convertible 2-DoorWHAT YOU GET: 1*Exhaust Manifold Kit Includes Gasket(s) Bolt(s)

  • Brand: cciyu
  • ASIN: B07LBNPQRQ

For Mitsubishi Eclipse 4-Cylinder Stainless Steel 4" Rolled Tip Catback System+Polished Exhaust Header

For Mitsubishi Eclipse 4-Cylinder Stainless Steel 4" Rolled

Catback Exhaust System:Upgrading vehicle's exhaust system is a great way to build horsepower, free up trapped torque, and improve upon restrictive factory systems. The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make a world of difference on your vehicle. The net result is lower auto exhaust backpressure, more horsepower, more torque, and a much better sound.Exhaust Header:This exhaust manifold for the 2000-2005 Mitsubishi Eclipse 4 Cylinder Engines were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 off-road racing headers are designed to allow the exhaust gasses to flow more freely from each cylinder and combine in a more efficient manner. Tubing has been optimized for the 2.4L engine. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Package Included:1 x Catback Exhaust1 x Exhaust Manifold Header Hardware / GasketsCompatible with:00-05 Mitsubishi Eclipse 4-Cylinder Non-Turbo

  • Brand: Auto Dynasty
  • ASIN: B018FOK01G
Similar Mitsubishi Eclipse Headers Results
Mitsubishi Eclipse Headers Video Results
           

Exhaust header install

Mitsubishi Eclipse Headers

A videos of me installing exhaust headers on my 2002 eclipse gs, check out my channel to see other diy's and install videos.

Tags: McRaney customs,exhaust headers,headers,race ca...

INSTALLING $700 headers:RRE HEADER INSTALL 4g Eclipse GT

Mitsubishi Eclipse Headers

hey guys installing RRE headers onto a 2006 eclipse GT hope you guys like it like, comment, and subscribe SvperDvperProductions SvperDvperAlex Twitter: @alexjr_quintana Instagram: @svperdvperalex Snapchat: @alexjr_quintana SvperDvperIsaac Twitter: @isaacq16 Instagram: @9_isaac_7 Snapchat: @isa...

Tags: eclipse,headers,eclipse gt

95 Eclipse Catback Exhaust System Install.

Mitsubishi Eclipse Headers

95 Eclipse Catback Exhaust System Install.

Tags: Header,Install,Catback,Exhaust,System