Mitutoyo 531-128 Vernier Calipers, Stainless Steel, for Inside, Outside, Depth and Step Measurements, Inch/Metric, 0"/0mm-6"/150mm Range, +/-0.0011"/0.03mm Accuracy, 0.001"/0.02mm Resolution, 40mm Jaw Depth

Mitutoyo 531-128 Vernier Calipers, Stainless Steel, for Inside,

The Mitutoyo 531-128 vernier caliper measures 0” to 6” or 0 to 150 mm with +/- 0.0015” or +/- 0.03 mm accuracy, for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. This caliper takes inside, outside, depth, and centering readings. The vernier caliper has a fixed (main) scale and a movable (vernier) scale. The vernier scale moves over the main scale rule to give a fractional measurement which is added to the measurement of the main scale to achieve a more accurate result. The main scale may be marked in inches, millimeters, or both. The vernier scale may be marked in inches or millimeters. The 531-128 has a dual vernier scale, with both inch and metric measurements, on the upper and lower edges, respectively. The dual scale enables this caliper to measure a greater diversity of item types. Model 531-128 has a spring loaded thumb clamp to control the sliding movement of the vernier scale. To improve visibility and readability and avoid parallax errors, the caliper has a modest face angle on the vernier scale. The 531-128 has a dual vernier scale, with an Upper Scale measuring in inches and a Lower Scale measuring in millimeters. The vernier graduation of the Upper Scale is 0.001"; the...

  • Brand: Mitutoyo
  • ASIN: B001C11U6E
  • UPC: 603908141655

Mitutoyo 530-316 Vernier Caliper, Stainless Steel, Inch/Metric, 0-6" Range, +/-0.002" Accuracy, 0.0078" Resolution

Mitutoyo 530-316 Vernier Caliper, Stainless Steel, Inch/Metric, 0-6"

The Mitutoyo 530 series vernier caliper has two sets of jaws and a depth bar for four-way measurement in inch and metric units of outside dimension (OD), inside dimension (ID), step, and depth, for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with an upper scale measuring in inches and a lower scale measuring in millimeters. A 14-degree vernier face angle improves visibility and helps prevent parallax error in measurement reading. The caliper’s two sets of jaws provide the capability to make OD and ID measurements, as well as step measurements, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are measured. A depth measuring blade with rounded edges provides the ability to make depth measurements. The scales are raised to slide easily and protect the graduation markings. A thumbwheel permits fast and easy measuring. A clamping screw on the upper scale rotates to control scale movement and locks to hold the sliding jaw’s position. The caliper is made of hardened, corrosion-resistant stainless steel with a satin chrome finish that helps reduce glare. The caliper meets Federal Accuracy Spe...

  • Brand: Mitutoyo
  • ASIN: B003UATQKM

Mitutoyo 532-120 Vernier Caliper, Stainless Steel, Inch/Metric, 0-7" Range, +/-0.0011" Accuracy, 0.001" Resolution

Mitutoyo 532-120 Vernier Caliper, Stainless Steel, Inch/Metric, 0-7"

The Mitutoyo 532 series vernier caliper has a fine adjustment carriage to precisely control movement of the vernier scale, and two sets of jaws and a depth bar for four-way measurement in inch and metric units of outer dimension (OD), inner dimension (ID), step, and depth, for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with an upper scale measuring in inches and a lower scale measuring in millimeters. A fine adjustment carriage feeds the slider to allow precise movement of the vernier scale. A 14-degree vernier face angle improves visibility and helps prevent parallax error in measurement reading. The caliper’s two sets of jaws provide the capability to make OD and ID measurements, as well as step measurements, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer "steps" are measured. A depth measuring blade with rounded edges provides the ability to make depth measurements. The scales are raised to slide easily and protect the graduation markings. A thumbwheel permits fast and easy measuring. A clamping screw on the upper scale rotates to control scale movement and locks to hold the sliding jaw...

  • Brand: Mitutoyo
  • ASIN: B003UATQQQ
  • UPC: 603908007029

Mitutoyo 500-196-30 Advanced Onsite Sensor (AOS) Absolute Scale Digital Caliper, 0 to 6"/0 to 150mm Measuring Range, 0.0005"/0.01mm Resolution, LCD

Mitutoyo 500-196-30 Advanced Onsite Sensor (AOS) Absolute Scale

The Mitutoyo 500-196-30 digital caliper has a 0 to 6" (0 to 150mm) measuring range with 0.0005" (0.01mm) increments for precision and an advanced onsite sensor (AOS) electromagnetic inductive sensor for resistance to dirt, oil, and water. Its digital readout LCD shows inch or metric units for versatility, and allows either absolute or incremental measurement readings. The electronic caliper measures inside, outside, depth, and step values for versatility and includes a protective case and SR44 silver oxide battery.Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements, which are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can swit...

  • Color: Stainless Steel
  • Brand: Mitutoyo
  • ASIN: B00IG46NL2
  • UPC: 637230482704

Mitutoyo 500-752-20, Digimatic Caliper, 0-6", IP67, 0005" 0/01 mm No SPC

Mitutoyo 500-752-20, Digimatic Caliper, 0-6", IP67, 0005" 0/01

Caliper, Digimatic, 0-6", IP67, 0005" 0/01mm no SPC

  • Brand: Mitutoyo
  • ASIN: B01LPIWAYO
  • UPC: 603908604952

Mitutoyo 530-312 Vernier Calipers, Stainless Steel, for Inside, Outside, Depth and Step Measurements, Metric, 0"/0mm-150mm Range, +/-0.03mm Accuracy, 0.02mm Resolution, 40mm Jaw Depth

Mitutoyo 530-312 Vernier Calipers, Stainless Steel, for Inside,

The Mitutoyo 530 series vernier caliper has two sets of jaws and a depth bar for four-way measurement in inch and metric units of outside dimension (OD), inside dimension (ID), step, and depth, for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with an upper scale measuring in inches and a lower scale measuring in millimeters. A 14-degree vernier face angle improves visibility and helps prevent parallax error in measurement reading. The caliper’s two sets of jaws provide the capability to make OD and ID measurements, as well as step measurements, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are measured. A depth measuring blade with rounded edges provides the ability to make depth measurements. The scales are raised to slide easily and protect the graduation markings. A thumbwheel permits fast and easy measuring. A clamping screw on the upper scale rotates to control scale movement and locks to hold the sliding jaw’s position. The caliper is made of hardened, corrosion-resistant stainless steel with a satin chrome finish that helps reduce glare. The caliper meets Federal Accuracy Spe...

  • Brand: Mitutoyo
  • ASIN: B000VB6ZC0
  • UPC: 603908141457

Mitutoyo 530-101 Vernier Calipers, Stainless Steel, for Inside, Outside, Depth and Step Measurements, Metric, 0"/0mm-150mm Range, +/-0.05mm Accuracy, 0.05mm Resolution, 40mm Jaw Depth

Mitutoyo 530-101 Vernier Calipers, Stainless Steel, for Inside,

The Mitutoyo 530 series vernier caliper has two sets of jaws for measurement in metric units of outside dimension (OD), inside dimension (ID), step, and depth (when depth bar is included), for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with both the upper and lower scales measuring in metric units. A 14-degree vernier face angle improves visibility and helps prevent parallax error in measurement reading. The caliper’s two sets of jaws provide the capability to make OD and ID measurements, as well as step measurements, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are measured. When included, a depth measuring blade with rounded edges provides the ability to make depth measurements. The scales are raised to slide easily and protect the graduation markings. A thumbwheel permits fast and easy measuring. A clamping screw on the upper scale rotates to control scale movement and locks to hold the sliding jaw’s position. The caliper is made of hardened, corrosion-resistant stainless steel with a satin chrome finish that helps reduce glare. The caliper meets Federal Accuracy Specification...

  • Brand: Mitutoyo
  • ASIN: B000VBAC0Q
  • UPC: 603908141334

Mitutoyo 500-197-30 Advanced Onsite Sensor (AOS) Absolute Scale Digital Caliper, 0 to 8"/0 to 200mm Measuring Range, 0.0005"/0.01mm Resolution, LCD

Mitutoyo 500-197-30 Advanced Onsite Sensor (AOS) Absolute Scale

The Mitutoyo 500-197-30 digital caliper has a 0 to 8" (0 to 200mm) measuring range with 0.0005" (0.01mm) increments for precision and an advanced onsite sensor (AOS) electromagnetic inductive sensor for resistance to dirt, oil, and water. Its digital readout LCD shows inch or metric units for versatility, and allows either absolute or incremental measurement readings. The electronic caliper measures inside, outside, depth, and step values for versatility and includes a protective case and SR44 silver oxide battery.Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements, which are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can swit...

  • Color: Stainless Steel
  • Brand: Mitutoyo
  • ASIN: B00I3UA89C
  • UPC: 709466943035

Mitutoyo 530-116 Vernier Caliper, Stainless Steel, 0-8" Range, +/-0.0015" Accuracy, 0.0078" Resolution

Mitutoyo 530-116 Vernier Caliper, Stainless Steel, 0-8" Range,

The Mitutoyo 530 series vernier caliper has two sets of jaws and a depth bar for four-way measurement in inch units of outside dimension (OD), inside dimension (ID), step, and depth, for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with both the upper and lower scales measuring in inch units. A 14-degree vernier face angle improves visibility and helps prevent parallax error in measurement reading. The caliper’s two sets of jaws provide the capability to make OD and ID measurements, as well as step measurements, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are measured. A depth measuring blade with rounded edges provides the ability to make depth measurements. The scales are raised to slide easily and protect the graduation markings. A thumbwheel permits fast and easy measuring. A clamping screw on the upper scale rotates to control scale movement and locks to hold the sliding jaw’s position. The caliper is made of hardened, corrosion-resistant stainless steel with a satin chrome finish that helps reduce glare. The caliper meets Federal Accuracy Specifications GGG-C-111B. Calipers ...

  • Brand: Mitutoyo
  • ASIN: B003UATQI4
  • UPC: 603908006848

Absolute Digital Caliper, 0 to 12 in

Absolute Digital Caliper, 0 to 12

The Mitutoyo ABSOLUTE 500 series caliper is a Digimatic digital caliper that is made of durable hardened stainless steel and uses Mitutoyo’s ABSOLUTE linear encoder technology, which allows you to “set and forget” the origin and measure in awkward or difficult locations. This digital caliper has LCD readout and function control buttons on the caliper face, including Origin to set and retain the original measuring point, and Zero/ABS (Absolute Scale) to zero-set the LCD display. It uses the metric measuring system. Although identical to dial and vernier calipers in its ability to make precise measurements, the digital caliper also has an LCD, which clearly shows values and increases reading reliability over the other types, and reflects all ABSOLUTE system activities. The Absolute Scale (ABS) function tracks the origin point you set, even after shutoff. Once on again, the caliper can immediately start measuring, without zero resetting or concern of overspeed errors. The LCD can be "zeroed out" before making and comparing incremental measurements without having to subtract the first measurement from the second. The calipers use the ABSOLUTE electrostatic capacitance linear encoder which helps prevent overspeed errors. They measure outer diameter (OD), inner diameter (ID), de...

  • Brand: Mitutoyo
  • ASIN: B000X3CX90
  • UPC: 094717006554
Similar Mitutoyo Vernier Calipers Results
Mitutoyo Vernier Calipers Video Results
           

Vernier Caliper Use from Mitutoyo

Mitutoyo Vernier Calipers

Mitutoyo product demo video showing the use of vernier calipers. Subscribe to Mitutoyo America - https://www.youtube.com/user/MitutoyoAmerica?sub_confirmation=1 Find a Mitutoyo US Distributor - http://www.mitutoyo.com/distributor-locator/ #Mitutoyo #VernierCaliper #MitutoyoCaliper

Tags: Mitutoyo,vernier caliper,product demo,mitutoyo ...

How to Read Vernier Calipers in Inches

Mitutoyo Vernier Calipers

Learn how to read an imperial, inch vernier caliper. This video shows how to read vernier calipers that can be used for outside, inside, and depth measurements. Subscribe to Mitutoyo America - https://www.youtube.com/user/MitutoyoAmerica?sub_confirmation=1 Find a Mitutoyo US Distributor - http:...

Tags: how to read vernier caliper in inches,how to re...

Digital caliper comparison - Mitutoyo Brand name VS Cheap Brand

Mitutoyo Vernier Calipers

In this video, I'll compare digital Mitutoyo Brand Name Caliper vs Mastercraft / Import for Canadian Tire, or any budget retailer like Harbor Freight, Princess Auto, Busy Bee, Grizzly, Shars, Accusize, etc.... That will import and sell them with their name printed on them. In my own conclusio...

Tags: Mitutoyo,starrett,mastercraft,shars,buzy bee,pr...