Clutch Bell Shims OFNA 10410

Clutch Bell Shims OFNA

This is a set of miscellaneous washers and screws for shimming 1/8th scale buggy and monster truck clutches. It is always a good idea to shim the clutch so that the bell has a little bit of play, but not too much. Hence a pack or two of these shim kits are great to keep in your pit box.

  • Brand: Ofna Racing Division
  • ASIN: B000BOHJSQ
  • UPC: 783719980503

Hobao Hyper 7 TQ Ofna MAC STAR .28 13T CLUTCH BELL, FLYWHEEL, SHOES & SPRINGS

Hobao Hyper 7 TQ Ofna MAC STAR .28

HoBao 1/8 Nitro Hyper 7 TQ Buggy (Model HB-M7TQ-C28).28 Clutch Bell, Flywheel, Clutch Shoes & SpringsMSRP: $51.98This Product Includes:Flywheel (Part # 84057) Collar ;(Part # 84057C) 13 Tooth Clutch Bell (Part # FR-24D) Two (2) Ball Bearings, 5x10x4mm ;(Part # 224067) Clutch Nut (Part # 224044) Three (3) Clutch Shoes (Part # 84052) Three (3) Clutch Springs (Part # 84053 Partial) Shims, 5.1x8x0.25mm and One (1) Washer Spacer, 3.1x6x0.5mm ;(Part # ;84187W Partial) One (1) Cap Head Screw, 3x8mm ;(Part # ;32308 Partial)This product is NEW in OEM Packaging and is from a New, Unused HoBao 1/8 Nitro Hyper 7 TQ Buggy (Model HB-M7TQ-C28)Part Numbers are for Reference Only. The parts included with this product are exclusive to what is pictured in this listing.This product is compatible with the following Model: HoBao 1/8 Nitro Hyper 7 TQ Buggy (Model HB-M7TQ-C28)

  • Brand: Hobao
  • ASIN: B01N36Z2X0
  • UPC: 030656516570

OFNA Clutch Bell With Bearings 17T 19357

OFNA Clutch Bell With Bearings 17T

Ofna 17T clutch bell with bearings for the Hyper 7. This part installs over the clutch shoes. Constructed of black steel. 17 tooth design.

  • Brand: Ofna
  • ASIN: B001BRBP3C
  • UPC: 023705193570

OFNA Clutch Bell With Bearings 12T 10398

OFNA Clutch Bell With Bearings 12T

Ofna optional 12 tooth clutch bell is constructed of steel and black in color. INCLUDES: Ofna 12 Tooth Clutch Bell with two 5x10mm ball bearings Requires: Installing on clutch assembly

  • Brand: Ofna
  • ASIN: B0006O7NDM
  • UPC: 023705103982

Ofna Cover for Clutch Bell R3 [35243] GTP 2 Speed Rev3

Ofna Cover for Clutch Bell R3 [35243] GTP

  • Brand: OFNA Racing
  • ASIN: B002PIRAGW
  • UPC: 023705352434

Ofna 18904 Clutch Bell Base w/Bearings

Ofna 18904 Clutch Bell Base

This is the Clutch Bell w/Ball Bearings for use the the Two-Speed Tranny for the Ofna Monster Pirate Series. INCLUDES: One Clutch Bell One Clutch Nut Two 5x10mm Sealed Ball Bearings One 3x6mm Hex Head Screw Four 5x8mm Steel Shims (.25mm Thickness) One 3x6mm bronze washer REQUIRES: The Ofna Two-Speed Tranny for the the Monster Pirate SPECS: Clutch Bell Outer diameter: 29mm (1.14") Clutch Bell Inner diameter: 26.6mm (1.05") Thickness: 13mm (.51")

  • Color: 22058
  • Brand: Ofna
  • ASIN: B0006O7RGU
  • UPC: 023705189047

OFNA Racing Shim Washers .2mm Clutch Bell by OFNA Racing

OFNA Racing Shim Washers .2mm Clutch Bell by

Brand new item. Sealed in original package.

  • Brand: OFNA Racing
  • ASIN: B01LVU4LXA

Ofna 19355 Clutch Bell w/Bearings 15T

Ofna 19355 Clutch Bell w/Bearings

Ofna Clutch Bell w/Bearings 15T

  • Brand: Ofna
  • ASIN: B000BOJ812
  • UPC: 023705193556

OFNA Racing Shim Washers .2mm Clutch Bell

OFNA Racing Shim Washers .2mm Clutch

This is a package of Clutch Bell Washers (Shims) from Ofna. FEATURES: Steel construction, silver in color YOU WILL RECEIVE: Four 5.2x10mm shims (.30mm thick) Four 7.3x10mm shims (.30mm thick) REQUIREMENTS: Installation kpm12/15/2004 ir/jxs &

  • Brand: OFNA Racing
  • ASIN: B0006O8700
  • UPC: 023705900239

Traxxas 5352R Heavy-Duty Slipper Clutch Rebuild Kit

Traxxas 5352R Heavy-Duty Slipper Clutch Rebuild

This is the 5352R H/D Rebuild Kit Revo/Maxx Trucks from Traxxas. Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running. No one has done more than Traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby. Traxxas, truly the fastest name in Radio Control.

  • Brand: Traxxas
  • ASIN: B003HAW5U8
  • UPC: 885726276829

Hot Racing VXS4801 Black Aluminum Bell Crank Steering Kit

Hot Racing VXS4801 Black Aluminum Bell Crank Steering

Hot Racing Servo Saver Set for the Traxxas 1/16 Revo, 1/16 4x4 Slash, 1/16 Mustang, 1/16 Rally, 1/16 Summit FEATURES: CNC Constructed out of aluminum, Black in color YOU WILL RECEIVE: All servo saver components with mounting hardware REQUIREMENTS: Installing onto chassis.

  • Brand: Hot Racing
  • ASIN: B00XF89S0C
  • UPC: 083745618495

RCAWD Clutch Bell 14T Gear Flywheel Assembly Bearing Clutch Shoes Springs Cone Engine Nut D10201 for 1/8 RC Hobby Model Nitro Car HPI HSP Traxxas Axial Himoto 1set(Shipped Locally)(Red)

RCAWD Clutch Bell 14T Gear Flywheel Assembly Bearing

Size: Bearing: 10 x 4 mm / 0.39 x 0.16 inch (Dia x Thickness) Flywheel: 34.4 x 17 mm/13.5 x 0.67 inch(Dia x H) Clutch gear:28 x 22 mm/ 1.1 x 0.87 inch (Dia x H) Clutch Shoes:20 x 10 x 7.5 mm/ 0.79 x 0.39 x 0.3 inch(L x W x H) Weight:47 g Package include: 1 x Flywheel 1 x Clutch gear 1 x Clutch Nut 3 x Clutch Shoes & springs 2 x Bearing 1 x Screw 1 x Round spacer(Just as photo showed)

  • Color: Red
  • Brand: RCAWD
  • ASIN: B01N02LR2L
  • UPC: 757290285999

HobbyCrawler Clutch Bell Shoes Bearing 14T Gear Flywheel Assembly Kit Set Springs Cone Engine Nut for 1/8 RC Hobby Model Nitro Car HPI HSP Traxxas Axial Himoto (Red Color)

HobbyCrawler Clutch Bell Shoes Bearing 14T Gear Flywheel

Specification:Bearing: 10 x 4 mm / 0.39 x 0.16 inch (Dia x Thickness)Flywheel: 34.4 x 17 mm/13.5 x 0.67 inch(Dia x H)Clutch gear:28 x 22 mm/ 1.1 x 0.87 inch (Dia x H)Clutch Shoes:20 x 10 x 7.5 mm/ 0.79 x 0.39 x 0.3 inch(L x W x H)Package include:1 x Flywheel1 x Clutch gear1 x Clutch Nut3 x Clutch Shoes & springs2 x Bearing1 x Screw1 x Round spacer

  • Color: Red Color
  • Brand: HobbyCrawler
  • ASIN: B07Q5F18GD

Redcat Racing BS933-011 Steel Clutch Bell, 15T

Redcat Racing BS933-011 Steel Clutch Bell,

Redcat Racing Part # BS933-011 Steel clutch bell, 15T. Compatible with the following Redcat Racing vehicles: CALDERA 3.0, EARTHQUAKE 3.5. Redcat Racing is located in the United States and has a full staff of support personnel to help you with your Redcat Racing product. Consult your vehicle manual for correct fitment and assembly. Since 2005 Redcat has been your source for fast - affordable - fun!

  • Brand: Redcat Racing
  • ASIN: B00G6IC4KO
  • UPC: 609132447044

Redcat Racing 02023S Steel Two Speed Clutch Bell

Redcat Racing 02023S Steel Two Speed Clutch

Redcat Racing Part # 02023S Steel two speed clutch bell. Compatible with the following Redcat Racing vehicles: lightning STR, SHOCKWAVE, Tornado S30. Redcat Racing is located in the United States and has a full staff of support personnel to help you with your Redcat Racing product. Consult your vehicle manual for correct fitment and assembly. Since 2005 Redcat has been your source for fast - affordable - fun!

  • Brand: Redcat Racing
  • ASIN: B00E5L95CE
  • UPC: 609132458521

Traxxas NEW Revo 3.3 14T CLUTCH BELL, SHOES, NUT, CONE, BEARINGS & FLYWHEEL

Traxxas NEW Revo 3.3 14T CLUTCH BELL, SHOES,

Traxxas 1/10 Revo 3.3 (Model 5309)Clutch Bell, Shoes & FlywheelMSRP:42.50Important Note: The first image is for illustration purposes only. Please refer to the product description for exact contents.Requires Assembly: This product is NOT ASSEMBLED. Any assembly pictured is for illustration purposes only.Includes:Clutch Bell - 15T/Fiber Washer/2 E-Clip (Part # 5215)Clutch Shoes & Spring (Part # 4146X)Aluminum 2-Pin Flywheel (Part # 4142)Flywheel Nut (Part # 5244)2 Ball Bearings - 5x11x4mm (Part # 4611)Split Beveled Cone (Part # 3281)50+ Piece E-Clip/C-Clip/Snap R Ring Set (Part # 1633)This product is compatible with the following Model(s): Revo

  • Brand: Traxxas
  • ASIN: B01M6X5852
  • UPC: 700118747988

Hobbypark RC 14T Clutch Bell + Shoes with Spring +Flywheel Assembly Kit Set for Redcat Volcano S30 SH-18 VX-18 Nitro Engine Parts

Hobbypark RC 14T Clutch Bell + Shoes with

Note: The color of the item may vary slightly due to photography and your own computerCustomer Satisfaction Guarantee If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange! Item: Clutch set Package Include: 1 Set (As shown in the picture)

  • Brand: Hobbypark
  • ASIN: B071ZVNRC9
  • UPC: 756970385165

RC New 17T Clutch Bell with Bearings For RC 1/8 Car

RC New 17T Clutch Bell with Bearings For

This is 17T Vented Racing Clutch Bell for the HPI Nitro Savage X, Savage X 4.6, Savage XL. This clutchbell is lighter weight which allows your engine to spool up faster. It also features cooling vents to help prevent premature bearing failure. This fits directly on HPI Savage X/XL Monster Trucks. *Description 1. Material: Steel Construction 2. Including: Comes with all parts pictured including 3. Lighter weight with cooling vents

  • Brand: hobbysoul
  • ASIN: B00WKLBV6Y

OFNA Racing Clutch Shoes, Pre-Cut

OFNA Racing Clutch Shoes,

Features: Black Plastic Construction INCLUDES: Three Shoes REQUIRES: Three Shoe Flywheel and Clutch Bell SPECS: Diameter: 25.4 mm (1")

  • Brand: Ofna
  • ASIN: B0006O7KQW
  • UPC: 787793482120

Hobbypark Aluminum Nitro Engine Clutch Shoes with Springs HSP 081008 (81202) for RC 1:8 Scale Car Truck Upgrade Parts Ofna Hyper

Hobbypark Aluminum Nitro Engine Clutch Shoes with Springs

Item: 3 Clutch Shoes & Spings Part No.: 081008 Package Include: 1 Set (As show in the picture) Features: Material:Aluminum Alloy Application:21-28cxp Engines Compatibile with:1/8 Scale Nitro Power Car Buggy Truck Note:Check your specific model's manual for compatibility,or Contact us.

  • Brand: Hobbypark
  • ASIN: B016LY66GU
  • UPC: 756970377238
Similar Ofna Clutch Bell Results
Ofna Clutch Bell Video Results