ANVISION 2-Pack 48V 0.5A Passive PoE Power Supply Injector Ethernet Adapter with Wall Plug IEEE 802.3af Compliant 10/100Mbps for IP Voip Phones, Cameras, AP and More

ANVISION 2-Pack 48V 0.5A Passive PoE Power Supply

A great solution for poe devices and non-poe device(extra poe splitter will be required), the injector adapter can be used to power PoE devices(built-in poe function or module) such as IP Phone, IP cameras or Wireless Access Points etc. The device has a compact size, wall-mountable design makes it easy to install the adapter into areas where space is limited, no configuration required. specification Input: AC100-240V 50/60Hz, Data In: Connects to network switch or router, Output: Data & Power (output voltage: 48V, output current: 0.5A max.); Power feed: V+ 4,5; V- 7,8; Date: 1,2, 3,6;Data rate: 10/100Mbps;PoE Power Transmission Distance: Up to 100mPackage content: 2x 48V0.5A PoE Injectors

  • Brand: ANVISION
  • ASIN: B01IZAQJG0

iCreatin Wall Plug POE Injector With 48v Power Supply 802.3af for Most Cisco / Polycom / Aastra Phones and More

iCreatin Wall Plug POE Injector With 48v Power

" Note: This PoE injector only used for 10/100Mbps network. The iCreatin PoE Injector can save you money by using an existing Ethernet line to deliver data and power. The iCreatin PoE Injector can easily connect any IEEE 802.3af-compliant device to a non-PoE LAN switch port. This PoE Injector can be used to connect a wireless access point, IP phone, network camera, or any IEEE 802.3af powered device to a LAN switch. Reduce Wiring Costs With the iCreatin PoE Injector you can dramatically reduce wiring costs by powering devices through your existing Ethernet line rather than running new AC power lines. To use this PoE injector, all you need to do is connect the iCreatin PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device. Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems. The iCreatin PoE Injector is designed with short circuit protection Over Current and Over Voltage Protection, keeping your devices safe. It is also protect your products from overloads over 500mA and high voltages exceeding 50Vdc. Specifications 2 RJ45 Ethernet ports 48V 0.5A power out...

  • Color: Black
  • Brand: iCreatin
  • ASIN: B00NRGJCM6
  • UPC: 701936097927

BV-Tech 4 Port PoE+ Switch with 2 Ethernet Uplink and Extend Function - 60W - 802.3at + 1 High Power PoE Port

BV-Tech 4 Port PoE+ Switch with 2 Ethernet

The POE-SW502 is an unmanaged 6-Port Power over Ethernet Switch with a total of 60 watts of PoE power. All ports run at 10/100Mbps and can provide up to 30W per port through the IEEE 802.3at standard, as well as up to 60W on port 1 through Hi-PoE. It has two Ethernet uplink ports to allow for communication without sacrificing any PoE ports. It also features an "extend" switch to allow for PoE transmission of up to 820ft (which reduces data transmission to 10Mbps). Specifications: Ports: 2*10/100Mbps Uplink ports, 4*10/100 Mbps PoE ports PoE Power: Port 1 ≤60W, Port 2-4 ≤30W, Tota l≤60W PoE Protocol: IEEE802.3af (PoE), IEEE802.3at (PoE+), Hi-PoE Switching Capabity: 1.8G Packet Forwarding Rate: 890kpps Packet Buffer Memory: 768Kb MAC Table Size: 2K Flow Control: Enabled Humidity: 10 - 90% Power: DC48-57V Lightning Protection: Common Mode 2KV; Differential Mode 0.5KV Operating Temperature: 14F - 131F (-10C - 55C) Weight: 0.66lb (300g) Dimensions (W x D x H): 5.12in x 3.35in x 1.02in (130mm x 85mm x 26mm)All products sold by PoE Depot come with a 100% Satisfaction Guarantee - we offer a 30-day money-back guarantee, as well as a 1 year warranty that covers replacement for free.

  • Color: Black
  • Brand: BV-Tech
  • ASIN: B075G2PM17
  • UPC: 813076028560

WT-GPOE-4-48v48w Gigabit Passive PoE 4 Port Power Over Ethernet Injector with 48 watts for 802.3af Devices, Includes 48 Volt Power Supply

WT-GPOE-4-48v48w Gigabit Passive PoE 4 Port Power Over

Add gigabit PoE to any Switch.This device combines power with data from your network switch or router on to the Ethernet cable via Mode A (pins 1,2 and 3,6). All devices receive the same voltage (48v). The available power for all devices combined is 48 watts. To calculate power budget, please check device specs for power needs.Features Compatible with your 10/100/1000 Gigabit network switch or router - 1:1 ratio for LAN to POE ports Supports up to 4 devices with 48 watts total power Use to power IEEE 802.3af devices (Or devices labeled "12v,PoE" like Hikvision cameras) Shielded RJ45 ports - 4 data (LAN) in, 4 Data + Power (PoE) out Extend power up to 328 ft (100 meters) Passive "always on" 48v power on Mode A Power supply included 48 volts DC, 1 amp, 48 watts 110 to 220 volt AC operation 90% efficient UL, CE and FCC approved Applications: IP phones like Polycom, Cisco, Yealink WiFi Access points IP Cameras IEEE 802.3af Devices Devices labeled "12 volt, POE" (please see our video on this topic) To power PoE Texas' USB, 5v and 12v PoE splitters Other products from PoE Texas AT-4-56v120w - 4-port active injector for 802.3at GPOE-8A-48v60w - 8-Port version with 60 watts of available power AT-8-56v120w - 8-Port version with Active negotiation for 802.3at POE-8-...

  • Color: Black
  • Brand: WiFi-Texas
  • ASIN: B015S8397E
  • UPC: 752423138395

iCreatin Gigabit Power over Ethernet Plus PoE+ Injector Adapter 35 Watts 802.3at /af, Up to 100 Meters (328 Feet), PSE-480080G

iCreatin Gigabit Power over Ethernet Plus PoE+ Injector

" Note: This PSE-480080G works for 10/100/1000Mbps Gigabit network and PoE enabled devices. The iCreatin PoE Injector can save you money by using an existing Ethernet line to deliver data and power. The iCreatin PoE Injector can easily connect any IEEE 802.3af/at-compliant device to a non-PoE LAN switch port. This PoE Injector can be used to connect a wireless access point, IP phone, network camera, or any IEEE 802.3af/at powered device to a LAN switch. Reduce Wiring Costs With the iCreatin PoE Injector you can dramatically reduce wiring costs by powering devices through your existing Ethernet line rather than running new AC power lines. To use this PoE injector, all you need to do is connect the iCreatin PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device. Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems. The iCreatin PoE Injector is designed with short circuit protection Over Current and Over Voltage Protection, keeping your devices safe. Specifications 2 Gigabit Ethernet ports Up to 35W Rated power, Supplies PoE (15.4W) or PoE+ (30W) Power, support both IEEE802....

  • Color: Black
  • Brand: iCreatin
  • ASIN: B00NRF9GQO
  • UPC: 701936097903

TP-LINK TL-PoE150S PoE Injector Adapter, IEEE 802.3af Compliant, up to 100 Meters (325 Feet)

TP-LINK TL-PoE150S PoE Injector Adapter, IEEE 802.3af Compliant,

View larger The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af compliant PDs (Powered Devices) and PoE Splitter such as TP-LINK’s TL-POE10R, to expand your network to where you wish to place PDs but has no power outlet. PDs include but are not limited to Access Point, IP Camera, VoIP Phones. How It Works (1) For 802.3af compliant Powered Devices On the input side, connect the injector to its power adapter and a data source such as a router or a switch. On the output side, connect the injector to a Powered Device such as an access point, VoIP phone, or a PoE camera. (2) For Non-PoE Devices On the input side, connect the injector to its power adapter and a data source such as a router or a switch. On the output side, connect the injector to a splitter, and then to a non-PoE device. Specifications 2 10/100/1000M Ethernet ports 15.4W power output Deliver power up to about 328.1 feet(100 meters) Support 100-240V voltage input Package Contents TL-POE150S PoE Injector Power Cord Ethernet Cable User Guide Interface Available: For POE200A:, 1 x 10/100Mbps Auto-Negotiation/Auto MDI/MDIX RJ45 LAN port, 1 x 10/100Mbps Auto-Negotiation/Auto MDI/MDIX RJ45 PSE port, 1 48VDC power input port, For POE200B:, 1 x 10/100Mbps...

  • Color: Black
  • Brand: TP-LINK
  • ASIN: B001PS9E5I
  • UPC: 845973030506

BV-Tech Single Gigabit Port Power over Ethernet Plus PoE+ Injector - 30W - 802.3at - up to 100 meters (325 Feet) - BV-I100GH

BV-Tech Single Gigabit Port Power over Ethernet Plus

The POE-I100GH is an economical, single port, high-power 10/100/1000Mbps PoE Injector. It supplies up to 30W of remote power for IP cameras, wireless access points, VoIP phones, and other devices. The POE-I100H allows you to add additional ports to your PoE switch using a Cat-5 cable (sold separately). It complies with IEEE 802.3at/aft PoE standards and can work with 10/100/1000Mbps Base-T networking devices.

  • Color: Black
  • Brand: BV-Tech
  • ASIN: B00B4H00EO
  • UPC: 639767842105

iCreatin 48V 65watt External Power Supply Adapter with 5.5x2.1mm DC Jack for PoE Switch injectors

iCreatin 48V 65watt External Power Supply Adapter with

iCreatin 48V 65watt power supply Adapter with 5.5x2.1mm DC jack for PoE injectors and more Feature - 2.1mm x 5.5mm DC power plug - input 100-240VAC 50/60Hz - Output: 48v1.35A 65watt power supply, Built-in over voltage , over temperature , short circuit protection etc Used to provide PoE power to: * IP phones like Polycom, Cisco, Yealink etc. * WiFi Access points * IP Cameras * 802.3af/at devices What in box? 1x 48V65Watt Power adapter 1x US plug power cord

  • Color: Black
  • Brand: iCreatin
  • ASIN: B00W4Q0BQQ
  • UPC: 708191202837

iCreatin 4-Ports Passive Power over ethernet PoE injector Adapter with 48V65W Power supply for 4 IP Camera, VOIP phones or Access Points and more

iCreatin 4-Ports Passive Power over ethernet PoE injector

Steps to install the device: 1. Connect the Internet Lan to the data in Ports of PoE injector by Cat 5,6,7 cable, 2. Then, Connect the POE enabled devices to the POE ports of POE injector by Cat 5,6,7 cable, 3. Connect the DC plug of Power supply to the PoE injector. 4. Connect the power supply to mains supply (100-240VAC) This PoE kit only work for 10\100Mbps and PoE enabled Devices ! Please make sure your device has PoE function! Features: 4 port Power Injector module with 48V 65W power supply input 4 LAN ports, output 4 LAN+Power ports, shielded 650 ma resettable fuse on each port Power VOIP phones, IP Cameras, WiFi Access Points, and more Same voltage to all ports, share available power equally DC plug size : 2.1mm x 5.5mm Display indicator:LED power status Compatiable with all ethernet switch or router Compatiable with all power supply no more than 48 volts Power for 802.3af devices What in box? 1x 4 port POE power over ethernet injector [With plastic case] 1x 48V 65Watt UL listedPower adapter 1x US plug power cord

  • Color: Black
  • Brand: iCreatin
  • ASIN: B00W4PJ16S
  • UPC: 708191202820

TRENDnet Gigabit Power Over Ethernet Plus (PoE+) Injector,Converts Non-PoE Gigabit to PoE+ or PoE Gigabit, Network Distances up to 100 M (328 Ft.), TPE-115GI

TRENDnet Gigabit Power Over Ethernet Plus (PoE+) Injector,Converts

TRENDnet’s Gigabit PoE+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit PoE+ signal. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE and PoE+ devices. Connect the injector to a non-PoE Gigabit switch and then run an Ethernet cable with data + power to network a PoE or PoE+ device up to 100 meters (328 ft.) away. PoE Supplies a PoE device with PoE (15.4W) or PoE+ (30W) power. Installation Flexibility Wall-mountable design accommodates most installations scenarios. Gigabit SpeedsFull Duplex 2Gbps Ethernet speeds with this PoE+ injector. Package Contents:- TPE-115GI- Quick Installation Guide- Power cord

  • Brand: TRENDnet
  • ASIN: B00BK4W8TQ
  • UPC: 782386486103

Y-Axis Wall Plug PoE Injector Power Over Ethernet Supply 802.3af 48V 24W 0.5A for Security IP Camera

Y-Axis Wall Plug PoE Injector Power Over Ethernet

Be Aware the FAKE seller "PLUSPOE" & "TechTech" !!!!!! ☀️☀️Applications: ☀️☀️ IP Phone Wireless Access point and client devices Security IP Camera Systems ☀️☀️Specifications: ☀️☀️ Output: 48V DC 500mA - Please do not order if your unit requires more than 500 MilliAmps Input: 100-240V 50/60HZ Output: 48V-0.5A Input Current: 1A Efficiency: 80% Min Line / Load Regulation: 3% / 5% Ripple / Noise: 200mV p-p Turn-On Delay: 2 Seconds Max Rise Time: 40 mS Max Protections: Auto Recover Over-Voltage, Short Circuit, Over-Current Operating Temperature: -10 to +40℃ (14 to +104℉) Operating Humidity (RH): 5% - 90% Storage Temperature: -20 to +85℃ (-4 to +185℉) Network Connector Type: RJ45 Shielded POE Type: Passive POE ( Pins 4,5 V+, Pins 7,8 V-)

  • Color: Black (5 Sets)
  • Brand: Y-Axis
  • ASIN: B01MQ4102S
  • UPC: 602456444362

Ubiquiti POE-24 Power Over Ethernet 24vdc 24W 1Amp

Ubiquiti POE-24 Power Over Ethernet 24vdc 24W

Ubiquiti POE-24-24W Power over Ethernet Injector

  • Brand: Ubiquiti Networks
  • ASIN: B004EFHN66
  • UPC: 822335077751

UL/CE/FCC Certified DC Power Supply | 24, 48 and 56 Volt DC for Power Over Ethernet Applications (48 Volt 2.5 Amp 120 Watt)

UL/CE/FCC Certified DC Power Supply | 24, 48

UL and FCC approved DC power supply 100 or 240 volt AC input, 50/60 hz up to 90% efficient USA style AC cord included 24 inches, 60 cm 2.1mm x 5.5mm DC power plug Protection: Over-Current, Shorted Output The Power Supply will withstand a continous output short, normal operation will resume when the short is removed. 2.5mm adapter available from the web site 48 volt 120 watt 2.5 amp DC output, +- 2% 172 mm x 72mm x 42 mm 150 cm DC cord Applications: Replacement power supply for Linksys etc add a 2nd power supply for redundancy or load balancing also used with our 8, 12, 16, 24 port injectors Other Power Supply Options: WS-Failover device to bridge 2 power supplies 24 volt 60 watt 2.5 amp 24 volt 120 watt 5 amp 48 volt 60 watt 1.25 amp 48 volt 120 watt 2.5 amp (802.3af) 56 volt 60 watt 1.1 amp 56 volt 120 watt 2.2 amp Full details and data sheet our wifi texas web site

  • Color: 48 Volt 2.5 Amp 120 Watt
  • Brand: WiFi-Texas
  • ASIN: B00ESGEDAK
  • UPC: 752423137879

TRENDnet Gigabit Power Over Ethernet (PoE) Injector, Full Duplex Gigabit Speed Supported, Network PoE Devices up to 100 M (328 Ft.), 15.4 Watts, Auto-MDIX in/Out, Plug & Play, TPE-113GI

TRENDnet Gigabit Power Over Ethernet (PoE) Injector, Full

TRENDnet’s Gigabit PoE Injector, model TPE-113GI, combines electrical power with a Gigabit network connection. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE devices. Connect the injector to a non-PoE Gigabit switch and then run an Ethernet cable with data + power to network a PoE device up to 100 meters (328 ft.) away. PoE Supplies a PoE device with PoE (15.4W) power.HDMI PortConnect an HDMI monitor to the TUC-DS1 to add a high definition display to your workstation. Installation Flexibility Wall-mountable design accommodates most installation scenarios. Gigabit SpeedsFull Duplex 2Gbps Ethernet speeds with this PoE injector. Package Contents:- TPE-113GI- Quick Installation Guide- Power adapter (54V DC, 0.4A)

  • Brand: TRENDnet
  • ASIN: B007Q87KP2
  • UPC: 710931505146

GPOE-8-48v120w | Gigabit 8 Port Passive Power Over Ethernet Injector for PoE Cameras, IP Phones, WiFi Access Points and More | Includes a 48 Volt 120 Watt UL Power Supply

GPOE-8-48v120w | Gigabit 8 Port Passive Power Over

Instantly add PoE to any network switch. This injector will combine power and data onto the Ethernet cable for up to 8 PoE devices. All devices will receive the same voltage (48v) and will share up to 120 watts of power. Please check device specifications to calculate power budget. Product Features: Extends power up to 328ft (100 meters) 10/100/1000 gigabit data rate Power up to 8 devices in one unit - with 120 watts total combined power IEEE 802.3af compatible - Operates on Mode A (pins 1,2 3,6) 8 data in ports, 8 Data + PoE out ports Passive "always on" power 48 volt 120 watt UL power supply included - 110 to 220 volt AC operation, 90% efficient UL, CE and FCC approved Compatible Devices: IP phones like Polycom, Cisco, Yealink WiFi Access points IP Cameras like Hikvision 802.3af Devices Devices labeled "12 volt, POE" (*please see our video on this topic) Other products from PoE Texas We offer 10/100 and gigabit midspan injectors, PoE switches, and PoE splitter/converters for non-PoE devices WT-GPOE-4-48v48w: 4-Port Gigabit injector WS-GPOES-8-7-48v60w: 8-Port integrated gigabit switch WS-POE-8-48v60w: 8-Port midspan injector with 10/100 data and 60 watts WS-POE-8-48v120w: 8-Port midspan injector with 10/100 data and 120 watts WS-POE-12-48v120w: 12-Port midspan...

  • Color: Black
  • Brand: WiFi-Texas
  • ASIN: B01F334BHG
  • UPC: 722512407145

Ubiquiti Networks POE-24-12W-G PoE Injector, 12W, Black

Ubiquiti Networks POE-24-12W-G PoE Injector, 12W,

Specific PoE adapters are designed to work with the Air Gateway. You can deploy the Air Gateway indoors to connect wireless client devices.

  • Color: Black
  • Brand: Ubiquiti Networks
  • ASIN: B01DW99IPS
  • UPC: 602003746864

POE-8-48v60w | 8-Port Passive 10/100 Power Over Ethernet Midspan Injector for IP Cameras, VOIP Phones or Access Points with 48 Volts, 60 Watts Total Power

POE-8-48v60w | 8-Port Passive 10/100 Power Over Ethernet

Our Best Selling PoE Injector* Proven reliability since 2011 10/100 data rate Adds PoE to any switch or router Power up to 8 Cameras, WiFi AP's or IP Phones with 60 watts total combined power Power any 802.3af device Power any "12v,PoE" device (see our video for info) Designed for wall mount installation 8 data in, 8 data + PoE out Extends power up to 328 ft or 100 meters Passive PoE - Power is on all the time 2.1mm DC connector * This is not a switch - you use it to add PoE to any switch or router Power Supply Included 48 volts DC, 1.25 amps, 60 watts 110 to 220 volt AC operation 90% efficient UL, CE and FCC approved Unique mounting holes Reversing cable for Cisco 7940 and 7960 is included Details This device provides power on the spare data wires in the Ethernet cable. All devices receive the same voltage (48v). The total available power for all devices combined is 60 watts. Check device specs for power needs to ensure that you have adequate wattage to support all 8 ports. Consumption varies per device and model. Passive power means power is on all the time. Contact our expert tech support for compatibility questions. Other products from PoE Texas WS-POE-8-48v120w for 120 Watts (double the power) WS-POES-8-7-48v60w passive 7-port switch WT-GPOE-4-48v48w ...

  • Color: Black
  • Brand: WiFi-Texas
  • ASIN: B0086SQDMM
  • UPC: 609788692362

POE-8 | 8 Port Multi Port PoE Injector for Power and Data to 8 Devices - Instantly Add Power Over Ethernet to Any Switch - Power Supply NOT Included

POE-8 | 8 Port Multi Port PoE Injector

Wall mount, 8 port PoE injector Extend power to 328 ft or 100 meters This device offers * 8 RJ45 jacks with Data + Power * 8 RJ45 jacks Data only * 2.1mm x 5.5mm DC power jack * LED power status * 10/100 operation * 12 volt to 48 volt operation with external power supply - see our other listings for power supplies Used to provide PoE power to: * IP phones like Polycom, Cisco, Yealink * WiFi Access points * IP Cameras * 802.3af devices * Ubiquiti devices * Mikrotik *any POE device These devices provide power on the spare data wires in the ethernet cable. all devices receive the same voltage Other Options We also offer 24v versions, and 120 watt versions, with 8 or 12 ports.

  • Color: Black
  • Brand: PoE Texas
  • ASIN: B0075F7F2O
  • UPC: 609788692317

TAIFU AC 100-240V to DC 48V 60W 65W 90W Power Adapter Power Supply 5.5mm x 2.1mm for 8-Port Passive Power Over ethernet PoE Switch Injector, IP Phones Like Polycom, Yealink etc, WiFi Access Points

TAIFU AC 100-240V to DC 48V 60W 65W

Used to provide PoE power to: IP phones like Polycom, Yealink etc. WiFi Access points IP Cameras like Hikvision any 802.3af Device

  • Brand: TAIFU
  • ASIN: B07M9J5PPJ
  • UPC: 709445226333

Ethernet Port

Ethernet

The POE-24 (24VDC at 0.5A) features earth grounding/ESD protection, power LED, LAN LED and remote reset capability.

  • Color: Original Version
  • Brand: Ubiquiti Networks
  • ASIN: B00HXT8LPW
  • UPC: 609728685409
Similar Poe Power Supply Results
Poe Power Supply Video Results
           

What is PoE? Power over Ethernet Explained

Poe Power Supply

In this video, power over ethernet technology has been explained, which is also commonly known as PoE. What is PoE? Power over Ethernet is the technology, in which along with the data, power is also carried on the ethernet cables, which can be used to power up the networked devices, like IP Pho...

Tags: PoE,what is PoE?,What is PoE? Power over Ethern...

What is Power over Ethernet (PoE)?

Poe Power Supply

Welcome to another edition of StreakwaveTV Learning Center. This video will focus on Power over Ethernet (PoE), which allows the integration and delivery of both power and data over the same cable. Also explained 802.3af vs 802.3at and Active vs Passive PoE. This overview of PoE will help you u...

Tags: Streakwave,poe,power over ethernet,wireless,acc...

5 Ways To Connect Network IP Camera With POE Power Supply

Poe Power Supply

How to connect IP Camera using Poe - Power Over Ethernet. 🙏 SUBSCRIBE ▶https://www.youtube.com/channel/UCLm9BE1iWg9w1Mepg7RtYRw?sub_confirmation=1 FOLLOW US ON: 👉 Pinterest: https://www.pinterest.com/quickoverview/ 👉 Google+: https://plus.google.com/+QuickOverviewChannel Track...

Tags: NETWORK RECORDER,NVR,DVR,IP CAMERA,POE SWITCH,P...