A16930 AquaClear Impeller Assembly, 70 Powerhead
A16930 AquaClear Impeller Assembly, 70
The AquaClear Impeller Assembly is a replacement part for the AquaClear 70 Powerhead. Adding an AquaClear Powerhead to an under gravel system increases water flow through a gravel substrate and improves its filtering efficiency.
- Brand: Aqua Clear
- ASIN: B0002563RM
- UPC: 015561369305
Aquascape Ultra 1500 Water Pump (G3) Replacement Impeller Kit | 91043
Aquascape Ultra 1500 Water Pump (G3) Replacement Impeller
Replacement pump impeller for Aquascape Ultra 1500 pump (G3) # 91009. Installation is quick and easy with Aquascape instructions and online support materials. Engineered and manufacturered for product quality and durability. Aquascape is passionate about ponds and water gardening, providing innovative and unique products, designs and professional services for over 25 years.
- Brand: Aquascape
- ASIN: B00B93KOK8
- UPC: 742575910437
Rio Plus 3100HP Water Pump for Aquarium, 900-Gallon Per Hour
AquaClear Impeller Shaft for Power Filter and Powerhead Pumps
AquaClear Complete Impeller Assembly for 20/201 Powerhead Pumps
Cobalt Aquatics MJ Water Pump Multi-Purpose Powerhead (5W/7.5W/8.5W/20W)
Cobalt Aquatics MJ Water Pump Multi-Purpose Powerhead
The Original MJ multi-use submersible pump and power head is built to perform and last under the harshest conditions. Ideal for wave makers, protein skimmers, calcium reactors, nano aquariums, undergravel filters and hydroponic applications. SPECIAL NOTE for REACTOR users: The MJ pump is the perfect pump for use with reactors on reef aquariums. One thing to understand is that reef aquariums have high levels of calcium, in fact at almost saturation levels, and areas with slightly higher temperatures can have active and dramatic precipitation of calcium on parts, ie impellers and impeller shafts. In as little as 4-5 months, calcium can build up enough to stop an MJ pump. Calcium build up is NOT covered by the warranty, but is easily kept in check with routine maintenance. Every 2-3 months, take out the MJ and remove the impeller, soak in distilled vinegar for 15-20 mins, then scrub parts with an old toothbrush and work the impeller up and down the shaft to break up and mineral deposits. Rinse with fresh water and re-install impeller and MJ into system. This simple maintenance will keep your MJ running like new for years.
- Brand: Cobalt Aquatics
- ASIN: B005QRHEJW
- UPC: 847852000600
A16830 AquaClear Impeller Assembly, 50 Powerhead
A16830 AquaClear Impeller Assembly, 50
The AquaClear Impeller Assembly is a replacement part for the AquaClear 50 Powerhead. Adding an AquaClear Powerhead to an under gravel system increases water flow through a gravel substrate and improves its filtering efficiency.
- Brand: Aqua Clear
- ASIN: B0002DIE08
- UPC: 015561368308
AquaClear Impeller Shaft for Powerhead Pumps
MarineLand Maxi-Jet 1200 Pro Pump for Aquariums 3 in 1, 295/1300 GPH
MarineLand Maxi-Jet 1200 Pro Pump for Aquariums 3
From industry firsts to industry standards, Marineland products are designed with both performance and style in mind. We push precision and power beyond the expected and listen to our loyal customers to make our products even better. We do this because at the heart of our innovative spirit is a desire to help hobbyists everywhere do more, create more and, most of all, enjoy more. So whatever your customers are passionate about — freshwater or saltwater, big or small, beauty or science — help them make their aquarium their own. Make it Marineland. Maxi-jet multi-use water pumps are three pumps in one: powerhead, utility pump and now featuring circulation pump option. Still the best powerhead for powering undergravel filters and running with wave maker timers, as well as running small fountains, calcium reactors and skimmers. New to the maxi-jet, the conversion kit in the box to turn the powerhead into a prop style circulation pump for ultimate water movement inside the aquarium for the least amount of energy. The most fully adaptable pump available.
- Color: -1
- Brand: MarineLand
- ASIN: B004IMPOJ8
- UPC: 047431905122
AquaClear Ceramic Impeller Shaft for Powerhead Pumps
Impeller for Penguin 660 and 660R Powerheads
Rio 17 HF Hyperflo Powerhead Impeller
JBJ Accela SP1-1000 Powerhead Replacement Impeller
JBJ Accela SP1-1000 Powerhead Replacement
Replacement Impeller for the JBJ Accela SP1-1000 Powerhead. This is also the replacement Impeller for the Model:SP1/1000 Pump that comes with some of the 28G and 24G Nano Cubes (the pump is labeled Model:SP1/1000 on the back). This impeller will not work with the Model SP1-1000E or any other pump that came with a JBJ Nano Cube.
- Brand: JBJ Manufacturing
- ASIN: B00SX554XC
Aquaneat 600GPH Submersible Aquarium Water Pump Hydroponic Fountain Powerhead for Fish Tank Pond Waterfall
Aquaneat 600GPH Submersible Aquarium Water Pump Hydroponic Fountain
FEATURE: Removable Filter Sponge and sealed impeller for a debris free operation Suction cup mounting feet for either vertical or horizontal mounting Contains no seals or messy oils Good for both fresh water and salt water SPECIFICATION: Max Flow Rate: 600 GPH H-Max (Lift height): 7 feet Voltage: 110 - 120 V @ 60 Hz Length of power cord: 4.5 feet Outlet: Fits 3/4", 7/8" ID (inside diameter) tubingNOTE: As this aquarium pump is submersible, and need to be put into water fully before power on to avoid the aquarium pump burning out Please use socket with stable voltage and keep the motor running within rated power to ensure long lifespan If the water pump is stuck by anything like Mud, garbage, sea salt, etc. need to be cleaned with clean water before use Prohibit no-load running. Put the pump into water first before connecting power supply and ensure the pump must be completely submersed under water. When changing water, please disconnect power supply. It would shorten its lifespan and lead to making loud noises when running in the air for long time DIMENSION: 4.5"x2.75"x3.75" (L x W x H) INCLUDES: 1x Pump 2x Outlet adapters 1x Filter Sponge
- Brand: Aquaneat
- ASIN: B07HDZ9S2Z
AquaClear Impeller Assembly, 110 Powerhead
AquaClear Impeller Assembly, 110
The AquaClear Impeller Assembly is a replacement part for the AquaClear 110 Powerhead. Adding an AquaClear Powerhead to an under gravel system increases water flow through a gravel substrate and improves its filtering efficiency.
- Brand: Aqua Clear
- ASIN: B0006JLOLE
- UPC: 015561371872
AquaClear Impeller Assembly, 30 Powerhead
AquaClear Impeller Assembly, 30
The AquaClear Impeller Assembly is a replacement part for the AquaClear 30 Powerhead. Adding an AquaClear Powerhead to an under gravel system increases water flow through a gravel substrate and improves its filtering efficiency.
- Brand: Aqua Clear
- ASIN: B0002DIDZO
- UPC: 015561367806
Sierra 18-3217 Impeller Kit for Mercury #1 Drives through Serial Number D494568, Non-Retail Packaging
Sierra 18-3217 Impeller Kit for Mercury #1 Drives
Sierra 18-3217 Impeller Kit for Mercury #1 Drives through Serial Number D494568, Non-Retail Packaging DETAILS • Impeller is made from a neoprene rubber compound for added flexibility and long lasting performance • Sierra Impellers are molded to maintain high quality standards and have been inspected and tested for proper bonding and performance • Kit comes complete with: (1) Water Tube, Sierra Part #18-3109; (1) Impeller, Sierra Part #18-3017; (1) Water Pump Base to Gear Housing Gasket, Sierra Part #18-2919; (1) Grommet, Sierra Part #18-3110; (2) Gear Housing Drain Screw Gaskets, Sierra Part #18-2945; (1) Water Pump Base to Gear Housing Gasket, Sierra Part #18-2826; (1) Lower Water Pump to Wear Plate Gasket, Sierra Part #18-2914; (1) Upper Water Pump to Wear Plate Gasket, Sierra Part #18-2915; (1) Seal Ring, Sierra Part #18-2944; (1) Plate, Sierra Part #18-3117; (1) O-Ring, Sierra Part #18-7158; (1) O-Ring, Sierra Part #18-7162; (1) O-Ring, Sierra Part #18-7173; (1) O-Ring, Sierra Part #18-7176; (1) Water Pump Gasket, Sierra Part #18-2801; (1) O-Ring, Sierra Part #18-7196; (1) O-Ring, Sierra Part #18-7426 • Made to meet or exceed Original Equipment specifications for quality and performance • All Sierra parts qualify for and are covered under Sierra's Industry L...
- Brand: Sierra International
- ASIN: B00027H2O8
- UPC: 030999236890
Marineland PR1266 Impeller Unit 1140 Power Head Filter Parts for Aquarium
Hydor Koralia Nano 565 Circulation Pump for Aquariums, 565 GPH
Hydor Koralia Nano 565 Circulation Pump for Aquariums,
In a world where nan tanks rule, hydro introduces a more powerful nan pump added to the koala nan line, with an output of 565 mph, it delivers more flow than any koala nan before! it can be used with any on/off timer or controller to create desired flow patterns and beneficial water movements in the aquarium. Includes patented magnet-suction cup support for easy positioning.
- Color: Black
- Brand: Hydor
- ASIN: B00P5P8V0Q
- UPC: 841421011448
JBJ Accela SP1-800 Powerhead Replacement Impeller
HOW TO: Fix Impeller Noise using Silicon Oil
Hi everyone this video is to help those of you who suffer with impeller noise. In this video i fix the noise on my allpondsolutions.co.uk 650L/H Aquarium Powerhead. This tip should work fine for the majority of impellers. You can also use the silicon oil to lubricate any rubber washers or seals s...
How to Clean an Impeller and Powerhead
I talk you through opening up and cleaning a filter power head and impeller unit on my Fluval aquarium. Also check out my Facebook page: https://www.facebook.com/BagheerasKeeper/
Power head cleaning to allow water flow from new impeller.
Evinrude 1962 Sportwin 10hp brnad new impeller not pumping water, power head removal to clean debri.