TRANSTAR 6144 Epoxy Primer Activator - 1 Quart

TRANSTAR 6144 Epoxy Primer Activator - 1

2K Epoxy Primer Sealer/Groundcoat is an exceptional lead and chromate free corrosion-resistant coating with excellent adhesion on a variety of properly prepared surfaces. 2K Epoxy Primer Sealer/Groundcoat improves adhesion of body fillers and resists moisture damage caused by water permeation. If further reduced, this product may be used as a precoat or sealer/groundcoat prior to topcoating.

  • Brand: TRANSTAR
  • ASIN: B000RI711G
  • UPC: 845505000199

Genteel Coatings Universal Urethane Primer Activator - 1 Quart

Genteel Coatings Universal Urethane Primer Activator - 1

1608 Genteel Coatings Universal 2K Urethane Primer Activator - 1 Quart

  • Brand: Genteel Coatings
  • ASIN: B07B4LSS1V

MAXX FILL 2K High Build Urethane Primer Surfacer with Activator - Light Grey (1 Gal.)

MAXX FILL 2K High Build Urethane Primer Surfacer

5451 | MAXX FILL 2K High Build Urethane Primer Surfacer - Gray - 4.4 VOC (1 Gallon/3.785 Liters) 5457 | Maxx Fill Activator - 4.4 VOC (1 Quart/.946 Liters) One Quart is included with purchase 5 STAR Xtreme's MAXX FILL 2K High Build Urethane Primer Surfacer is formulated to provide a fast-drying, high-build film that has maximum adhesion, easy sanding properties and excellent color holdout. 5451 is designed to be used on properly prepared steel, aluminum, iron, fiberglass and previously painted surfaces. This primer surfacer can be topcoated with any paint system. Offered in a Gray color. TECHNICAL DATA: Color: Light Gray Mixing Ratio: 4:1:1 Catalyst: #5457 Activator 1.5mm - 2.2mmm for Conventional and HVLP guns 35-45 psi at the gun for Conventional gun 28-35 psi at the gun for HVLP gun Film Build : 3.0 mils wet Pot Life: 3 hours VOC: 4.4 lbs/gallon (RTS)

  • Color: Light Grey
  • Brand: MAXX FILL 2K
  • ASIN: B009IZ7M1S
  • UPC: 680569192714

TRANSTAR (6124-F) Self-Etching Primer Activator - 1 Quart

TRANSTAR (6124-F) Self-Etching Primer Activator - 1

Self-Etching Primer is a two part self-etching and passivating (retards corrosion process) primer. The system provides excellent protection against corrosion for bare metal, galvanized steel, and aluminum, eliminating the need for metal conditioning. The system has an easy 1:1 mix ratio and requires no induction time prior to using. Mixing 6111/6121/Acetone @ 1:1:2 complies with California SCAQMD Rule 1151 for Group I and Group II vehicles for use as a preteastment. Transtar's Self Etching Primer 6111/6121 performs as an excellent tie coat for any topcoat system when applied over unsanded E-Coat panels. Refer to product data sheet for specific instructions. Size: Gallon Case/Qty: 2 Package V.O.C: 7.1/Gal (600g/l) Color: Activator Solids RTU: 25 Shelf Life: 1 year Mix Ratio (by volume): a.)(1:1),1 part 6111 to 1 part 6121 b.)(*1:1:2),1 V.O.C. Applied: Sprayable [email protected] (729g/l) Pot Life: Up to 5 days @ 70ºF and 50% relative humidity

  • Brand: TRANSTAR
  • ASIN: B00IK1W856
  • UPC: 845505005316

TRANSTAR 6584 2.1 Low VOC 2K Primer Activator - 1 Quart

TRANSTAR 6584 2.1 Low VOC 2K Primer Activator

Transtar 2K Acrylic Urethane Primer Activator

  • Brand: TRANSTAR
  • ASIN: B004QI15LA
  • UPC: 845505000700

Loctite 494147 Klean 'N Prime Anaerobic Activator Aerosol Can, 4.5-oz.

Loctite 494147 Klean 'N Prime Anaerobic Activator Aerosol

Loctite Klean 'N Prime Anaerobic Activator is a solvent based primer that features very long on-part life. Use to speed the cure of all Loctite anaerobic products and ensure proper cure on inactive metals. Ideal for cure conditions below room temperature. Typical applications include all nut and bolt applications.

  • Brand: Loctite
  • ASIN: B0002KKTSG
  • UPC: 079340375093

Dicor RPCRPQ EPDM Rubber Roofing Coating System roof Cleaner/Activator - 1 Quart

Dicor RPCRPQ EPDM Rubber Roofing Coating System roof

Extend the life of your rubber Roof! Two part, commercial grade system combines a cleaner/ Activator necessary for proper roof preparation and an acrylic coating that provides an excellent protective barrier for extending the life of the EPDM rubber membrane. Saves over 25% in labor compared to similar systems. Quick drying time. Part 1: cleaner/Activator cleans and prepares EPDM roofing for maximum adhesion of acrylic coating. Spray on and rinse off thoroughly. Coverage rate of 1 Qt. Per 125 sq. Ft.

  • Brand: Dicor
  • ASIN: B000BRFS8Q
  • UPC: 677917002504

TRANSTAR 7354 2.1 Low VOC Euro Classic Primer Activator - 1 Quart

TRANSTAR 7354 2.1 Low VOC Euro Classic Primer

Convenient 4:1 mix ratio High solids formula for improved fill & build Excellent sprayability and flow out Tintable using Transtar's "Star Shade" System 50 state & Canada compliant Great corrosion resistance Easy sandability ISO-Free

  • Brand: TRANSTAR
  • ASIN: B00KNC8XCM
  • UPC: 845505002773

Loctite 19269 7649 Primer N Activator

Loctite 19269 7649 Primer N

This item comes in a 1.75 fluid oz bottle. LOCTITE ACTIVATOR 7649 Primer N is a single component non-CFC solvent based surface activator. The activator is designed to promote the speed of cure of Loctite anaerobic adhesives and sealants such as Loctite 680.7649 can be used with Loctite 680 (PN:680) on specially designed Anaerobic connectors to increase the cure speed. Please refer to our connector department to get more information about these connectors. Direction for use:Inject the 680 Anaerobic adhesive into the connector with a syringe needle, dip or spray the fiber with primer 7649 and connectorize as usual.

  • Color: Original Version
  • Brand: Loctite
  • ASIN: B00FKFGSHE
  • UPC: 840371100219

Speedokote SMR-210/211 - Automotive High Build 2K Urethane Primer Gray Gallon Kit, Fast Dry, Easy Sanding, Activator is included

Speedokote SMR-210/211 - Automotive High Build 2K Urethane

This product is not available in California, Maryland, or Delaware. Please order SMR-221. Please note, If you order this product to be shipped to these states, a replacement may be used and will delay your shipping. This auction is for a gallon kit of high build gray urethane primer (SMR-210) which includes a quart of activator (SMR-211). The SMR-210 is a 4.8 lbs/gallon voc (National Rule product). Not for sale in 2.1 lbs/gallon voc areas. The SMR-210 is a fast dry, easy sanding 2K urethane primer with great color and gloss holdout. - Easy 4:1 mix - High build and fill - Sands great - Medium gray color - True 2K urethane - Free Shipping Not for sale in California, Maryland or Delaware

  • Brand: Speedokote
  • ASIN: B00M8BEWBM

Speedokote Universal Activator primers, hot Rod Black, etc, Quart SMR-211-Q

Speedokote Universal Activator primers, hot Rod Black, etc,

This sale is for a quart of SMR-211, Universal Activator for Speedokote primers, hot rod black, etc, quart SMR-211-Q

  • Brand: Speedokote
  • ASIN: B079Y751DJ
  • UPC: 682821552854

AP-39 Automotive Paint Primer Grey 2K Urethane Gallon Kit Normal Activator

AP-39 Automotive Paint Primer Grey 2K Urethane Gallon

Automotive paint primer sealer applied as a high build sanding primer or final non-sanding primer sealer. Compatible with AF 970 Black Automotive Base coat certified to be among the Deepest Black Base coats in the market. Not for sale in California, Delaware, and Maryland.

  • Brand: American Automotive Products
  • ASIN: B075SJXJDP
  • UPC: 867914000447

TRANSTAR (6121-F) Self-Etching Primer Activator - 1 Gallon

TRANSTAR (6121-F) Self-Etching Primer Activator - 1

TRANSTARSelf Etching Primer Activator1 Gal - Part#6121-FSelf-Etching Primer is a two part self-etching and passivating (retards corrosion process) primer. The system provides excellent protection against corrosion for bare metal, galvanized steel, and aluminum, eliminating the need for metal conditioning. The system has an easy 1:1 mix ratio and requires no induction time prior to using. Mixing 6111/6121/Acetone @ 1:1:2 complies with California S.C.A.Q.M.D. Rule 1151 for Group I and Group II vehicles for use as a pre-treatment. Transtar's Self Etch Primer #6111/#6121 performs as an excellent tie coat for any top coat system when applied over unsanded E-Coat panels. Refer to product data sheet for specific instructions.This listing is for 6121-F, the activator for Transtar Self Etching Primer 6111Check out our other TRANSTAR products!

  • Brand: TRANSTAR
  • ASIN: B00IK1W7HU
  • UPC: 845505005309

Permatex 24163 Surface Prep Activator for Anaerobics, 4.5 oz.

Permatex 24163 Surface Prep Activator for Anaerobics, 4.5

Permatex Surface Prep Activator for Anaerobics speeds cure of Permatex Threadlockers, Thread Sealants, Retaining Compounds, and Anaerobic Gasket Makers by 50% and increases threadlocker strength. This is used as a general-purpose solvent for cleaning and preparing parts and surfaces and is recommended for use during cold weather.

  • Brand: Permatex
  • ASIN: B000HBID8S
  • UPC: 686226241634

TRANSTAR 6937 2K Acrylic Primer Activator - 0.5 Pint

TRANSTAR 6937 2K Acrylic Primer Activator - 0.5

For use in EZ Sand Primer and 2K Hi-Performance Acrylic Urethane Primer.

  • Brand: TRANSTAR
  • ASIN: B000RI56TU
  • UPC: 845505000090

Modern Masters PA904-16 Rust Activator, 16-Ounce

Modern Masters PA904-16 Rust Activator,

Water-based acidic solutions that are applied to the metal effects reactive metallic paints by brush, sea sponge, or pump spray. Solution will react with the real metal in the paints, thus speeding up the oxidation process. Metal effects-rust activator. For use with Modern Masters reactive metallic paints. Speed-up natural oxidation process for aged look.

  • Brand: Modern Masters
  • ASIN: B000I1QE7Y
  • UPC: 740774999727

Finish 1 2K Urethane Automotive Clear Coat: 32 oz. Quart Clear Coat + 8 oz. Activator

Finish 1 2K Urethane Automotive Clear Coat: 32

  • Brand: SHERWIN WILLIAMS
  • ASIN: B00H9MF6Y2
  • UPC: 799475326820

Nail Dipping Powder Liquid Set Starter Kit - Includes Primer, Gel Base Coat, Dip Powder Activator, Gel Top Coat and Brush Saver, 15ml Each (Liquid Kit)

Nail Dipping Powder Liquid Set Starter Kit -

[Package List] 1 x Primer 1 x Base Coat 1 x Top Coat 1 x Activator 1 x Brush Saver Capacity: 15ml each[How to Apply Dip Powder] Step 1. Prep the nail and clean it, then apply one coat of Base coat to the entire nail. Step 2. Dip the nail into the container of dip powder, repeat it if necessary. Step 3. Apply activator is aim to dry dip powder, wait 1 minutes and lightly file the nail surface (shaping nail shape), finally apply another 1 coat of activator. Step 4. Apply 1 coat of no-wipe top coat, all done! [How to Remove Dipping Powder] Step 1. Use a nail file to file top coat. Step 2. Pour suitable acetone liquid into the gel nail foil. Step 3. Wrap it well around the fingernails. Step 4. Wait about for 10-15 minutes. Step 5. Take off the foil and remove it with cuticle pusher.

  • Color: Dip powder liquid kit
  • Brand: I.B.N
  • ASIN: B07PLF8RT9

Hydro Film Dip Kit - Hydro Dip Film - Hydrographic Film - Water Transfer Printing - Hydro Dipping - Full Kit - Rainbow Flame - 6oz - Midwest White & High Gloss Clear Coat - Primer - Activator

Hydro Film Dip Kit - Hydro Dip Film

Hydrographic Film Supplies Complete Hydro Dip Kits Hydrographic film supplies now offer a complete dip kit. Each Kit includes 1 Linear Meter (19"x38") of the Film Listed. 1- 6oz Aerosol Activator - 1- 6oz Aerosol of Primer 1 - 6oz Aerosol of White Base Coat 1 - 6oz Aerosol of High Gloss Clear Coat 1- Mask 1- Scratch Pad 1- Pair of latex gloves and Instruction Sheet. Should you have any further questions please contact us via Amazon. Also If you Desire a different Base or Clear Coat please contact us We offer Primer: Our high build Primer is the perfect product for a quick coverage over darker substrates and to even out used substrates that you are trying to renew. it is a fast drying and sand-able substance. Base Coats: We have several options to choose from for the base coats used in the hydrographic process. Everything from fluorescents, metallic, basic colors and much more. Clear Coats: Our Clear Coat line offers both high gloss and dead flat clears. Our automotive grade clear coats have a great UV protection. Never done hydrographic printing before? Don't worry - Our products are some of best on the market. We provide easy to follow instructions that helps anyone new to the hydrographic process. You'll be delighted with the results, no matter which object you choose to print...

  • Brand: Southern Hydrographics
  • ASIN: B07D4P3H7V
  • UPC: 669439740132

TRANSTAR 7357 2.1 Low VOC Euro Classic Primer Activator - 0.5 Pint

TRANSTAR 7357 2.1 Low VOC Euro Classic Primer

Transtar Euro Classic DTM Primer Activator, ½ Pt.

  • Color: Clear
  • Brand: TRANSTAR
  • ASIN: B0082LGJJU
  • UPC: 845505002780
Similar Primer Activator Results
Primer Activator Video Results
           

How To Mix Finish 1 2K HS Urethane Primer

Primer Activator

Learn how to mix finish 1 2k HS urethane primer all on this video This video was made possible by rob's paint shop, you can find out more about robs paint shop in the links below for collision work, classic car and truck restoration,spray-in bedliners,headlight renewal/restoration,Hot Rods also ...

Tags: primer surfacer,urethane primer,tatsforlife,how...

How To Choose Primers: 2k Urethane Primer Surfacer Explained by Kevin Tetz

Primer Activator

In this video, Kevin explains the characteristics and when to use 2K Urethane Primer-Surfacer on your next project. LINK TO BUY 2K URETHANE PRIMER-SURFACER: https://www.eastwood.com/eastwood-gray-urethane-primer-and-activator-gal-kit.html?utm_source=youtube&utm_medium=annotation&utm_campaign=201...

Tags: Eastwood,kevin tetz,2k urethane primer surfacer...

Primers & Surfacers with Kevin Tetz - Eastwood

Primer Activator

In this video, Kevin explains the different types of primers available and when and where to use each, to ensure your paint job is built on a solid foundation. LINK TO BUY EPOXY PRIMER: http://www.eastwood.com/gray-epoxy-primer-eastwood.html?utm_source=youtube&utm_medium=annotation&utm_content=e...

Tags: Kevin Neils Tetz,Automobile (TV Genre),video,di...