Dodge Ram 07,08 Khaki REC Nav / Navigation Radio Bezel

Dodge Ram 07,08 Khaki REC Nav / Navigation

You are buying one new genuine Mopar navigational radio bezel. This paticular one is for 2007, or 2008 Dodge Rams with the with the (ZJ8) dark khaki color interior. Approximate radio opening dimensions are 8 1/4 inches wide by 5 inches tall. When adding a factory oem navigational radio to your Ram then this is the one for you.

  • Brand: Mopar
  • ASIN: B005SS82U4

Radio Stereo Car Install Double Din Navigation Silver Bezel +Harness & Antenna Adapter Fitted For Chrysler 300 2005 2006 2007

Radio Stereo Car Install Double Din Navigation Silver

Chrysler 300 2005-2007 Wiring harness in this kit does not work on models with factory CanBus systems or Boston Acoustic Systems. This is the complete kit that is needed to install a aftermarket Double Din radio into a Chrysler 300 with a Factory non Navigation radio installed. This entire set up includes the factory radio bezel in Silver! (part# XB311ZBAA), Double Din radio install trim kit, wiring harness and Antenna Adapter. Thus eliminating the time and hassle of buying four pieces separately. The Factory radio bezel is needed due to the fact that the opening or hole from the factory radio (with non factory navigation installed) is too small to install a aftermarket double din radio. So you must replace the whole trim piece. The bezel is silver. The Double din radio install trim kit is then needed to then reduce the factory radio bezel to the correct size of an aftermarket Double Din radio. This dash kit is designed specifically for your vehicle, it lines up with factory mounting to install and uninstall easily, in-case you decide to sell your vehicle it can go right back to factory. There are no modifications necessary. The harness will save you time and aggravation. To use it simply unplug your factory radio from the harness in the dash. On the aftermarket radio wire this i...

  • Color: Silver
  • Brand: Custom Install Parts
  • ASIN: B00OZMLBY8
  • UPC: 654391230616

Double Din Navigation Radio Bezel Dash Install Kit with Standard Wiring Harness and Antenna Adapter - GREY Fitted For Jeep Grand Cherokee 2005-2007

Double Din Navigation Radio Bezel Dash Install Kit

Up until now installing an Aftermarket Double Din Radio into the 2005-2007 Jeep Grand Cherokee meant having to buy the factory navigation bezel ( $175 ), an aftermarket radio install dash kit ( $12 ), wiring harness and a antenna adapter ($6). However our new kit allows you to replace your Factory Radio with an aftermarket Double Din radio at a reasonable price with a cleaner look. We have taken the extra steps out for buying multiple parts and lowered the price plus you will get a better looking installed with our kit. This wire harness is compatible with standard wiring only. Will not work on models with Factory Infinity Systems, Boston Acoustic Systems or CAN Bus Radios (models REF, REC, RAQ or RAK; The radio's name can be found on the face of the radio). Installation Directions- Tools needed for install - Philips screw driver, Dremel (rotary tool) and a Soldering Iron. You can buy a Soldering gun at Harbor freight for as low as $3.99 and a Dremel (rotary tool) knock off for $10.79 or just look on Amazon. Step 1: Gently pull on the factory bezel, it is only held on by a few plastic tabs up top and there are 2 clips on each side of the AC vents (totaling 4) and 1 clip at the bottom.. Step 2: You will see 4 Philips screws holding the factory radio in place, remove the screws and...

  • ASIN: B00KRD8GS8
  • UPC: 610098505099

Double Din Navigation Radio Bezel Dash Install Kit with Premium Wiring Harness with and Antenna Adapter - KHAKI Fits Jeep Grand Cherokee 2005-2007

Double Din Navigation Radio Bezel Dash Install Kit

Up until now installing an Aftermarket Double Din Radio into the 2005-2007 Jeep Grand Cherokee meant having to buy the factory navigation bezel ( $175 ), an aftermarket radio install dash kit ( $12 ), wiring harness and a antenna adapter ($6). However our new kit allows you to replace your Factory Radio with an aftermarket Double Din radio at a reasonable price with a cleaner look. We have taken the extra steps out for buying multiple parts and lowered the price plus you will get a better looking installed with our kit. Premium Wire Harness Module: This wiring harness allows models with Factory Amplified Systems or CAN Bus Factory Radios REF, REC, RAQ and RAK (names can be found of front of radio) to replace Factory Radios while retaining all necessary safety and warning features Installation Directions- Tools needed for install - Philips screw driver, Dremel (rotary tool) and a Soldering Iron. You can buy a Soldering gun at Harbor freight for as low as $3.99 and a Dremel (rotary tool) knock off for $10.79 or just look on Amazon. Step 1: Gently pull on the factory bezel, it is only held on by a few plastic tabs up top and there are 2 clips on each side of the AC vents (totaling 4) and 1 clip at the bottom.. Step 2: You will see 4 Philips screws holding the factory radio in place,...

  • ASIN: B00KRDTAH4
  • UPC: 610098505136

Dodge Charger 2006 2007 Dodge Magnum 2005 2006 2007 Radio Stereo Dash Install Double Din GPS Navigation Silver Bezel Assembly Installation

Dodge Charger 2006 2007 Dodge Magnum 2005 2006

This is the complete kit that is needed to install an aftermarket Double Din radio into a Charger/Magnum with a Factory non Navigation radio installed. The entire set up includes the factory radio bezel (part# 1CB331ZBAA), Double Din radio install trim kit, Wire Harness and Antenna Adapter. The Factory Radio Bezel is needed due to the fact that the factory radio opening in models with non Navigation radios are too small for the installation of a double din radio and therefore the entire bezel must be replaces with one equipped to install a Factory Navigation radio. The double din radio trim kit is then needed to reduce the size of the Factory Navigation bezel to the proper size of an aftermarket double din radio. This trim kit is designed specifically for the charger and magnum lining up with factory mounting to install and uninstall easily. There are no modifications necessary. The wire harness meets EIA color code to take the guess work out of installing an aftermarket radio. Designed to prevent the mess of cutting and splicing wires the existing indash male wire harness can be inserted into this female wire harness after it is wired to the new aftermarket radio. If you sell your vehicle simply unplug the aftermarket radio and replug the factory radio back in. Please note that ...

  • ASIN: B009ATW82A
  • UPC: 610098502067

Double Din Aftermarket Radio Stereo Navigation Bezel Conversion Dash Kit + Can BUS Factory Amplified Systems Radio Replacement Wire Harness & Antenna Adatper Fitted For Jeep Commander 2006-2007

Double Din Aftermarket Radio Stereo Navigation Bezel Conversion

Do not buy a whole new dashboard for the installation of an aftermarket double din radio. This kit allows you to modify your preexisting factory dashboard to fit an aftermarket double din radio. The Factory Navigation Trim Bezel is used as a trim piece for the modified your factory non navigation radio opening to factory navigation size. The Dash Kit will convert your factory Navigation size to the proper size for a Double Din Aftermarket radio. This dash kit is designed specifically for your vehicle and lines up with factory mounting for easy installation. The wire harness meets EIA color codes to take the guesswork out of which wire does what (just match the colors up from are harness with the harness that was provide with your aftermarket radio). Designed to prevent the mess of cutting and splicing wires into the existing factory wire harness. Works with standard wiring only (that means non can buss and non amplified systems) The Wire Harness Module allows the Factory Radio to be replaced while retaining all necessary safety and warning features. This Module allows models with Factory Amplified Systems to replace REF, REC, RAQ and RAK factory radios while retaining all necessary safety and warning features. The radio's name can be found on the face of the radio. The antenna ad...

  • Color: Khaki Slate Gray
  • ASIN: B00BBG5H7I
  • UPC: 610098503217

MYGIG FACTORY NAVIGATION ADATPER LOCKPICK RETRO-FIT BEZEL FILLER

MYGIG FACTORY NAVIGATION ADATPER LOCKPICK RETRO-FIT BEZEL

Brand New kit to the market with all new design. Fits way better then any other kit available in the market today. 100% Satisfaction Guaranteed. If you are not happy email us and we will refund your money including shipping. Compatible with all Double Din Chrysler, Dodge and Jeep REC or REJ navigation bezels or in which an REC 6CD Navigation radio has been installed or can be installed. Designed to convert the REC or REJ navigation bezels to correct size for the installation of a MyGIG Factory Navigation Radio. Why buy our product? Our trim piece was engineered with square edges instead of rounded edges. Square edges allow for a tighter fit around the inside perimeter of the navigation bezel. The rounded edges of others trim pieces bulges out of the navigation bezels rather than laying flat. Also our trim piece features cut-outs not on two sides but four to allow for all factory tabs to lock into place

  • Brand: Custom Install Parts
  • ASIN: B00AU56KY0
  • UPC: 610098503002

Radio Stereo Car Install Double Din Navigation Silver Bezel + Can Bus Factory Amplified Systems Radio Replacement Wire Harness & Antenna Adapter Fits Chrysler 300 2005 2006 2007

Radio Stereo Car Install Double Din Navigation Silver

This is the complete kit that is needed to install a aftermarket Double Din radio into a Chrysler 300 with a Factory non Navigation radio installed. This entire set up includes the factory radio bezel (part# XB311ZBAA),wiring harness and Antenna Adapter. This dash kit is designed specifically for your vehicle, it lines up with factory mounting to install and uninstall easily, in-case you decide to sell your vehicle it can go right back to factory. There are no modifications necessary. The Wire harness provides easy connection of the car stereo to the factory wiring harness. Harness includes both power and speaker wires, and each is labeled with its specific function. Any cutting of the factory wires is avoided so all connections are exactly right. All wires are color coded (EIA standard) for easy identification. This wiring harness allows Chrysler 300 models with Factory Amplified Systems to replace REF, REC, RAQ and RAK factory radios while retaining all necessary safety and warning features. The radio's name can be found on the face of the radio and the amplifier is usually branded Alpine, Boston Acoustic, Infinity or Kicker. The antenna adapter is used to adapt the factory antenna end to the standard Motorola male end need to plug in to your new aftermarket radio. This plug ma...

  • Color: Silver
  • Brand: Custom Install Parts
  • ASIN: B009AFHMZW
  • UPC: 610098502043

Radio Stereo Dash Install Double Din GPS Navigation Black Bezel Assembly Installation Fitted For Dodge Charger 2006 2007 Dodge Magnum 2005 2006 2007

Radio Stereo Dash Install Double Din GPS Navigation

This is the complete kit that is needed to install an aftermarket Double Din radio into a Charger/Magnum with a Factory non Navigation radio installed. The entire set up includes the factory radio bezel, Double Din radio install trim kit, Wire Harness and Antenna Adapter. The Factory Radio Bezel is needed due to the fact that the factory radio opening in models with non Navigation radios are too small for the installation of a double din radio and therefore the entire bezel must be replaces with one equipped to install a Factory Navigation radio. The double din radio trim kit is then needed to reduce the size of the Factory Navigation bezel to the proper size of an aftermarket double din radio. This trim kit is designed specifically for the charger and magnum lining up with factory mounting to install and uninstall easily. There are no modifications necessary. The wire harness meets EIA color code to take the guess work out of installing an aftermarket radio. Designed to prevent the mess of cutting and splicing wires the existing indash male wire harness can be inserted into this female wire harness after it is wired to the new aftermarket radio. If you sell your vehicle simply unplug the aftermarket radio and replug the factory radio back in. The antenna adapter is used to adapt...

  • Brand: Custom Install Parts
  • ASIN: B009AWXVMI
  • UPC: 610098502135

Double Din Navigation Radio Bezel Dash Install Kit with Premium Wiring Harness with and Antenna Adapter - GREY Fitted For Jeep Grand Cherokee 2005-2007

Double Din Navigation Radio Bezel Dash Install Kit

Up until now installing an Aftermarket Double Din Radio into the 2005-2007 Jeep Grand Cherokee meant having to buy the factory navigation bezel ( $175 ), an aftermarket radio install dash kit ( $12 ), wiring harness and a antenna adapter ($6). However our new kit allows you to replace your Factory Radio with an aftermarket Double Din radio at a reasonable price with a cleaner look. We have taken the extra steps out for buying multiple parts and lowered the price plus you will get a better looking installed with our kit. Premium Wire Harness Module: This wiring harness allows models with Factory Amplified Systems or CAN Bus Factory Radios REF, REC, RAQ and RAK (names can be found of front of radio) to replace Factory Radios while retaining all necessary safety and warning features Installation Directions- Tools needed for install - Philips screw driver, Dremel (rotary tool) and a Soldering Iron. You can buy a Soldering gun at Harbor freight for as low as $3.99 and a Dremel (rotary tool) knock off for $10.79 or just look on Amazon. Step 1: Gently pull on the factory bezel, it is only held on by a few plastic tabs up top and there are 2 clips on each side of the AC vents (totaling 4) and 1 clip at the bottom.. Step 2: You will see 4 Philips screws holding the factory radio in place,...

  • Brand: Custom Install Parts
  • ASIN: B00W1TIG2M
  • UPC: 654391231224
Similar Rec Navigation Bezel Results
Rec Navigation Bezel Video Results
           

2006-2008 Dodge Ram REC GPS Navigation 6CD Changer Radio - Easy Plug & Play Install!

Rec Navigation Bezel

Order Today! Click here: https://www.infotainment.com/products/2006-2008-dodge-ram-1500-gps-navigation-rec-radio This identical radio is also seen in many other Chrysler/Dodge/Jeep vehicles. See them here: https://www.infotainment.com/products/rec-gps-navigation-radio We would love the opportun...

Tags: Dodge,Chrysler,Jeep,2004,2005,2006,2007,2008,20...

How to Jeep Grand Cherokee car Stereo Removal 2005 - 2007 navigation screen replace repair

Rec Navigation Bezel

Jeep Stereo Removal and More http://www.CarStereoRemoval.com

Tags: jeep,cherokee,grand cherokee,stereo,radio,cd,cd...

RB1 Navigation Unit in a 1997 - 2001 Jeep Cherokee

Rec Navigation Bezel

Brief video of how to install a Mopar RB1 navigation unit with fully functioning navigation in a 1997 - 2001 Jeep Cherokee, as well as other CCD-bus based Chrysler vehicles. A full write-up of the installation can be found here: http://www.jeepforum.com/forum/f11/how-install-rb1-navigation-unit...

Tags: RB1,Navigation,GPS,Mopar,Jeep,Cherokee,Chrysler...