Builder's Best 010131 V430 Readi-Pipe Flexible Semi Rigid Aluminum Dryer Vent Duct, 4-inch by 8-foot with 2 Clamps

Builder's Best 010131 V430 Readi-Pipe Flexible Semi Rigid

Ready-pipe dryer transition duct, flexible, 4 in outside diameter, 8 ft length, -100 to 430 deg F, aluminum, includes: (2) clamps, 5000 FPM velocity. This V430 ready-pipe kit is designed for use as dryer transition duct, connecting the clothes dryer to the wall outlet. The class 0 non-insulated, non-combustible flexible aluminum air duct stretches to 8 feet. Soft cuff ends make smooth connections to standard 4" connections. The 2 steel screw clamps are designed to resist stretching and are used to secure dryer and wall connections. A typical laundry room uses approximately 8 feet of duct. Each 90 degree turn takes 6 inches of clearance will use up 1 foot of the length of the duct. Clothes dryer manufacturers specify "only rigid or flexible metal vent shall be used for exhausting. Do not use plastic or metal foil vent." we use 100% aluminum, roll formed with crimp-locked seam. Performance data: pressure rating: positive: 6" WC Max negative: 6" WC Max, maximum velocity: 5, 000 FPM, temperature range: -100˚f to +430˚f, flame spread 0, smoke developed 0. The V430 ready-pipe dryer vent kit is built in the USA by Builder's Best, inc.

  • Color: Silver All Aluminum
  • Brand: Builder's Best
  • ASIN: B0085KZNIQ
  • UPC: 722048101319

Whirlpool 4396014 29-Inch to 50-Inch Vent Periscope

Whirlpool 4396014 29-Inch to 50-Inch Vent

This is a genuine replacement part. The model number and name for the following item is: Whirlpool 4396014 Telescoping Vent Kit

  • Color: Multi
  • Brand: Whirlpool
  • ASIN: B0049I9OYC
  • UPC: 791484497775

427 4" x 60" Aluminum Pipe

427 4" x 60" Aluminum

4" x 60" Aluminum Pipe, Snap Lock. This Product is Highly durable. This Product is easy to use. This Product is Manufactured in United States.

  • Color: NULL
  • Brand: Generic
  • ASIN: B0026L164A
  • UPC: 039899004295

Frigidaire 5304492448 Exhaust Duct

Frigidaire 5304492448 Exhaust

This is a genuine replacement part. The model number and name for the following item is: Frigidaire 5304492448 Exhaust Duct

  • Brand: Frigidaire
  • ASIN: B00NYBAV4M
  • UPC: 012505454189

Deflecto Easy Connecting Dryer Vent Hook Up Kit , Flexible Semi-Rigid Aluminum Duct, (HUPK8WA/4)

Deflecto Easy Connecting Dryer Vent Hook Up Kit

Deflecto Hupk8wa/4 Easy Connecting Dryer Vent Hook-up Kit; Semi-rigid Aluminum Duct; Flexible Strip Gasket.

  • Brand: Deflecto
  • ASIN: B000IJTBFS
  • UPC: 881110022416

Dundas Jafine UD48S Straight Outlet, silver

Dundas Jafine UD48S Straight Outlet,

Space saver aluminum dryer venting duct. Extends 28" to 45". Allows dryer to be placed 3" from wall. Constructed of a 2-piece adjustable aluminum duct. Ideal for use in tight space with ceiling or wall installation.

  • Color: silver
  • Brand: Dundas Jafine
  • ASIN: B001AH3K72
  • UPC: 060672500277

BUILDERS BEST 111718 EZ-FLO 60630 dryer duct kit, 4"/8', Silver

BUILDERS BEST 111718 EZ-FLO 60630 dryer duct kit,

The EZ-FLO 60630 Semi-Rigid Dryer Duct Kit is an installation and replacement part that connects dryers to a wall outlet for venting. It is compatible with most major brands of electric and gas dryers. The semi-rigid dryer duct is flexible but will hold its shape. This allows for easier installation while positioning your dryer into place without kinking or crushing it. The dryer duct has an outer diameter of 4-inches, a close elbow on one end and 2 metal clamps for installation. It operates at a maximum velocity of 5, 000 feet per minute and a temperature range of -100-degrees F to 430-degrees F. The all-metal construction is more rigid than traditional foil ducts making it more resistant to puncturing and lint build up, which allows it to maintain an efficient energy saving airflow. The Dryer Duct Kit includes (1) semi-rigid dryer duct, (1) elbow, (2) metal clamps.

  • Color: Silver
  • Brand: Builder's Best
  • ASIN: B014JV0F4G
  • UPC: 722048117181

DUNDAS JAFINE P4E20ZW Heavy Gauge Dryer Vent Pipe, 4 In X 24 In, Snap Lock, Aluminum, 4" x 24"

DUNDAS JAFINE P4E20ZW Heavy Gauge Dryer Vent Pipe,

Dundas janine dryer vent pipe, heavy gauge, 4 in nominal, 24 in length, snap lock end, aluminum, bulk pack. This product can be used for venting most types of heating units. It works effectively and is convenient to use as well. It is definitely a great quality product.

  • Color: -
  • Brand: Dundas Jafine
  • ASIN: B001EESOKE
  • UPC: 060672300815

Lambro Industries, Dryer Vent Close Elbow Kit, 4 inch. Item #4006

Lambro Industries, Dryer Vent Close Elbow Kit, 4

Lambro Semi-Rigid Transition Duct and 90-Degree Close Elbow Kit is highly recommended for clothes dryer venting installations. Ideal for both gas and electric dryer installations. Prevents excess lint buildup due to a smooth interior surface. Resists crushing and maintains maximum airflow. Swivel connectors on close elbows allow moving dryer without disconnecting. Space saving design Prevents excess lint buildup due to a smooth interior surface Resists crushing and maintains maximum airflow Swivel connectors on close elbows allow moving dryer without disconnecting Flexible semi-rigid aluminum triple-lock design for more durability Ideal for both gas and electric dryer installations UL 2158A listed and labeled as a clothes dryer transition duct. Product Contains: (1) 4" x 6' UL 2158A Semi-Rigid Aluminum Transition Duct (2) 4" Aluminum 90 Degree Close Elbows (4) 4" Metal Worm Gear Clamps.

  • Brand: Lambro
  • ASIN: B0731LNHGT
  • UPC: 039899040064

Whirlpool 4396006RW Venting Close Elbow, 1-(Pack)

Whirlpool 4396006RW Venting Close Elbow,

This Dura Safe Close Elbow effectively turns 90 degrees within 4-1/2 Inch. It features snap-lock fittings and rotating collars. It is an ideal product for limited space installations.

  • Color: NA
  • Brand: Whirlpool
  • ASIN: B001AAEG5O
  • UPC: 883049036786

MagVent MV-90 Magnetic Dryer Vent Coupling

MagVent MV-90 Magnetic Dryer Vent

The MV-90 is designed for when the vent path takes a 90 degree turn, such as down through the floor, up through the ceiling, or off to the side. -The MV-90 can handle offsets up to 3 inches from center to center. The more accurately you line up the MV-90 with the vent on the back of your dryer, the better the vent path and the further back you can locate your dryer. Normally, the MV-90 requires 5 1/2 inches of clearance behind the dryer. If an obstruction necessitates you locate the MV-90 at the maximum 3 inch offset, then your dryer will need to sit out an additional 3 inches to allow for a bend radius in the transition duct. -Close vent offsets between dryer and wall vent located on same wall as dryer (Offsets between 6-9 inches): The MV-90 can be coupled directly to a standard 4 inch diameter, adjustable, 90 degree elbow which creates a 9 inch offset. See photo below. If your same wall offset is 6 inches, you can use the MV-90 and an elbow, taking advantage of its ability to handle misalignment up to 3 inches. -Same wall offsets greater than 9 inches: Simply mount the MV-90 directly behind your dryer, plug the 90 degree elbow into the wall vent, and measure for the required length of rigid metal pipe between them. Make sure to measure from where the pipe will stop on the MV-90...

  • Brand: MagVent
  • ASIN: B013TI7A4S
  • UPC: 707273664471

General Electric PM08X10085 Semi-Rigid Clothes Dryer Duct Kit, 4-Inch x 8-Feet

General Electric PM08X10085 Semi-Rigid Clothes Dryer Duct Kit,

Contains UL duct, steel screw clamps. Designed for optimum performance.

  • Brand: General Wire
  • ASIN: B00NPZHN98
  • UPC: 084691807599

Certified Appliance Accessories Certified Appliance 77014 Dryer Duct, 5-Fee, gray

Certified Appliance Accessories Certified Appliance 77014 Dryer Duct,

For years, licensed plumbers, electricians and appliance installers have relied on Certified Appliance Accessories for their power cords, hoses and connectors. Now you can too. Enjoy the convenience offered by this dryer vent duct from Certified Appliance Accessories. This high-quality dryer vent duct works for both gas and electric dryers, and its flexibility and durability ensure a reliable connection for your next home installation project. It has been thoroughly tested and is backed by a 5-year limited warranty. Follow our illustrated, step-by-step directions included in the packaging. Always consult your appliance’s installation instructions. Check your appliance's manual for the correct specifications and measure the distance from your dryer to the dryer exhaust vent to ensure this duct is right for you. Thank you for choosing Certified Appliance Accessories—Your Appliance Connection Solution.

  • Color: gray
  • Brand: Certified Appliance Accessories
  • ASIN: B004GUE9Y8
  • UPC: 086844770149

Deflecto Semi Rigid Aluminum Duct with Connectors, 4" x 24", Silver (MAC36024/6)

Deflecto Semi Rigid Aluminum Duct with Connectors, 4"

Easy to install, universal aluminum duct. 4" x 24" Multi-Angle Semi-Rigid Flexible Aluminum Duct with Male & Female Connectors

  • Color: Silver
  • Brand: Deflecto
  • ASIN: B0031KM9JQ
  • UPC: 079916031088

Deflecto Aluminum Duct with Connectors, Semi Ridgid, Flexible , 4" x 2', Silver (AM42)

Deflecto Aluminum Duct with Connectors, Semi Ridgid, Flexible

Deflecto Am42 Semi-rigid Flexible Aluminum Duct (4 Inch Dia X 2 Feet); 4 inch Dia X 2-feet Length; Fire-resistant Aluminum.

  • Color: Silver
  • Brand: Deflecto
  • ASIN: B00287YBAS
  • UPC: 151903427651

Dundas Jafine EZCNZW 4" Duct to Wall Connector, 4", White

Dundas Jafine EZCNZW 4" Duct to Wall Connector,

4 inch duct to wall connector.

  • Color: White
  • Brand: Dundas Jafine
  • ASIN: B00EZT5AQ6
  • UPC: 060672803019

Builder's Best BDB110050 Semi-Rigid Dryer Vent Kit with Close Elbow, Silver

Builder's Best BDB110050 Semi-Rigid Dryer Vent Kit with

This Builder's Best Semi-Rigid Dryer Vent Kit with 2 Close Elbows features an all-aluminum duct. This kit complies with all dryer manufacturer recommendations and most building codes. It includes everything you need to connect most dryer venting situations.

  • Color: Silver
  • Brand: Builder's Best
  • ASIN: B07L917XCZ
  • UPC: 722048100503

Flexible Clothes Dryer Duct - 10 Foot by 4 Inch | Includes 2 Premium Screw Clamps

Flexible Clothes Dryer Duct - 10 Foot by

Flexible Dryer Hose with 2 enhanced worm clamps - 10 Feet when full extended

  • Color: Aluminum
  • Brand: Kelaro
  • ASIN: B01N6DV33G
  • UPC: 644730790758

iPower GLDUCT4X8C 4 inch 8 feet Non-Insulated Aluminum Foil Vent with 2 Clamps, Ducting

iPower GLDUCT4X8C 4 inch 8 feet Non-Insulated Aluminum

4" 8' Non-insulated ducting aluminum foil vent with 2 clamps

  • Color: Silver
  • Brand: iPower
  • ASIN: B00EPE3XHY
  • UPC: 610395731405

Builder's Best 010149 Adjustable Dryer Vent Periscope, 0" to 5" , 6" Length, 2" ID, Aluminum

Builder's Best 010149 Adjustable Dryer Vent Periscope, 0"

This 010149 Zero Periscope is specifically designed for use in situations where the dryer Outlet overlaps or is very close to the wall Outlet. The 2 inch by 6 inch smooth aluminum construction telescopes to handle outlets up to 5 inches distance from center to center. The 4 inch diameter draw band collar synchs down over the clothes dryer vent i.e.. The 4 inch diameter crimped fitting slides into most wall ies. Once installed, it needs only 2.5 inches clearance behind the dryer. If your outlets are very close and you need to move the dryer closer to the wall, this vent maintains critical airflow and provides all metal performance. Clothes dryer manufacturers specify "only rigid or flexible metal vent shall be used for exhausting. Do not use plastic or metal foil vent." installation instructions are included inside each carton. The zero periscope is built in the USA by Builder's Best, Inc.

  • Brand: Builder's Best
  • ASIN: B01MQO54NV
  • UPC: 722048101494
Similar Rigid Dryer Duct Results
Rigid Dryer Duct Video Results
           

How to Vent a Clothes Dryer

Rigid Dryer Duct

Ask This Old House plumbing and heating expert Richard Trethewey travels to Cleveland to reroute a lengthy dryer vent. Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse Time: 1-2 hours Cost: $30 Skill Level...

Tags: this old house,how-to,home improvement,Episode,...

Cutting & Installing Semi-Rigid Dryer Duct

Rigid Dryer Duct

Tips on how to cut and connect a semi-rigid vent pipe on a clothes dryer. Dryer in video is a Whirlpool Cabrio model WED7300DW. Subscribe to my YouTube channel iScaper1 and receive an email notice each time I upload a new video!

Tags: clothes,dryer,vent,duct,pipe,connect,install,co...

How To Install A Dryer Vent

Rigid Dryer Duct

Installing a dryer vent is easier than you might think. Watch as we take your step by step!

Tags: dryer,clothes dryer,dryer vent,home improvement...