Cast-A-Mold 25T Silicone Rubber (1/2 Gallon)

Cast-A-Mold 25T Silicone Rubber (1/2

RTV Silicone Mold Making Rubber for Resin CastingCast-A-Mold 25T is a general purpose rtv silicone elastomer which exhibits excellent tear strength, long library life, and accurate detail reproduction. Cast-A-Mold 25T is a condensation cured silicone (tin catalyzed ) It is used to make rubber molds that can be used to cast polyurethanes, epoxy's, polyester's, cement, concrete, soap, wax, plaster, etc.. It is easy to mix and de-air, and will cure at room temperature over virtually any surface. Cast-A-Mold 25T is extremely useful for applications where superior physical properties are required. Properties:Product: Cast-A-Mold 25T Mix Ratio: 10:1 by weight Working Time: 3.0 hours Demold Time: 16 hour Heat Deflection: 300 f + Tensile Strength, psi: 660 Elongation %: 390 Tear Resistance, ppi: 140 Color: Green Hardness: A-25 Viscosity: 40,000 cpsWe typically ship same day when orders are received by 2 pm EST Monday-Friday

  • Color: blue
  • Brand: specialtyresin
  • ASIN: B008UW4OPC
  • UPC: 661799648660

Smooth-On - Smooth-Cast 300 Liquid Plastic Compound & Mold Star 15 Slow Molding Silicone Rubber (1 Pint A & 1 Pint B)

Smooth-On - Smooth-Cast 300 Liquid Plastic Compound &

Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. The pot life of Mold Star 15 SLOW is 50 minutes and cure time is 4 hours at room temperature. Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys. Note: Mold Star rubbers are not intended for brush-on moldmaking. Adult Supervision Required. Keep Out of the Reach of Children.

  • Color: KIT: Liquid Plastic & Liquid Rubber
  • Brand: Smooth-On
  • ASIN: B01D9BUVSW
  • UPC: 644730140164

Smooth-On OOMOO 25 - FAST Curing Mold Making Silicone Kit - 2 Pints - EASY!

Smooth-On OOMOO 25 - FAST Curing Mold Making

Smooth-On Oomoo 25 2 Pint Kit (contains 1 pint of part A and 1 pint of Part B) OOMOO® Silicone Rubber - No Scale or Vacuum Chamber Required. OOMOO® 25 is an easy to use silicone rubber compound that features a convenient one-to-one by volume mix ratio (no scale necessary). This silicone is easy to work with and has a very low viscosity for easy mixing and pouring. Vacuum degassing is usually not necessary. Takes excellent detail. Cures at room temperature with negligible shrinkage and good tear strength. OOMOO® 25 features a 15-minute pot life and 75 minute cure time. OOMOO® 25 & 30 are suitable for a variety of art-related and industrial applications including making molds for sculpture and prototype reproduction, casting plaster, resins and wax. Tin cure silicone. Cures to an opaque blue-lavendar. Tip: *Do not cast platinum cure silicone into Oomoo silicone or any other tin cure silicone*

  • Color: Blue
  • Brand: Smooth-On
  • ASIN: B01C4YQ4TU
  • UPC: 821079268753

Smooth-On Silicone Mold Making, Liquid Rubber OOMOO 30, Easy to Use - Trial Size 2.8 lb

Smooth-On Silicone Mold Making, Liquid Rubber OOMOO 30,

Use this silicone mold making rubber for making perfect reproductions that capture intricate detail of original models. OOMOO 30 is easy to use silicone rubber compounds that feature convenient one-to-one by volume mix ratios (no scale necessary). Very low viscosity for easy mixing and pouring and vacuum degassing is not necessary. Cures at room temperature with negligible shrinkage. OOMOO 30 has a 30-minute pot life, with a six-hour cure time. For the novice mold maker - OOMOO30 does not have great tear strength. They are good for making simple one- or two-piece block molds. OOMOO30 is suitable for a variety of art-related and industrial applications including making molds for sculpture and prototype reproduction, casting plaster, resins and wax. Technical Information Mixing Ratio: one to one by volume (100a:130b by weight) Pot Life: 30 min. Demold: 6 hrs. Color: lavender properties (part a and b mixed) Viscosity: 4,250 cps g/cc: 1.34 Cu. In./Lb.: 20.6 Tensile Strength: 240 psi Elongation at Break: 250% Die C Tear Strength: 40 pli Compression Set: 37% Shrinkage: .0025 In./In. Net weight 16 oz. (454 Grams) For Best Results: Store and use silicone products at room temperature. If material freezes, silicone base will become very thick. Simply allow product to get down to room tempe...

  • Color: Blue
  • Brand: Smooth-On
  • ASIN: B004BNF3TK
  • UPC: 885241574127

Mold Star 15 SLOW Moldmaking Silicone Rubber - Trial Unit

Mold Star 15 SLOW Moldmaking Silicone Rubber -

Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys. Note: THI-VEX is NOT compatible with Mold Star rubbers.MIX RATIO: 1:1 by volume; POT LIFE: 50 mins; DEMOLD TIME: 4 hrs; SHORE A: 15; COLOR: Green

  • Color: Mold Star 15 Liquid Rubber
  • Brand: Smooth-On, Inc.
  • ASIN: B00ATDV5BQ
  • UPC: 751635292413

Mold Star 20T Silicone Mold Making Rubber - Trial Unit (2 lbs.)

Mold Star 20T Silicone Mold Making Rubber -

Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys. Note: THI-VEX is NOT compatible with Mold Star rubbers. MOLD STAR 20T: MIX RATIO: 1:1 by volume; POT LIFE: 6 minutes; DEMOLD TIME: 30 minutes; SHORE A: 20; COLOR: Transparent Read the MSDS before using. Consult the Technical Bulletin for further information. Adult Supervision Required. Keep Out of the Reach of Children.

  • ASIN: B00LU4YFK6
  • UPC: 751635587410

Smooth-On Mold Max 30 Silicone Mold Making Rubber - Trial Unit

Smooth-On Mold Max 30 Silicone Mold Making Rubber

Mold Max RTV silicone rubbers will reproduce the finest detail and are suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. Mold Max silicones can also be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).

  • Color: Pink
  • Brand: Smooth-On
  • ASIN: B00IZND16Y
  • UPC: 751635836419

Simple 1:1 Mix Silicone Mold Making Rubber, AM 125 1 Gallon

Simple 1:1 Mix Silicone Mold Making Rubber, AM

This is a simple 1:1 mix Silicone Mold Making RTV designed for beginers to mold making. It is ideal for most mold making applications and cures in less than two hours. Use petroleum jelly to separate silicone when using with glass and other silicones for the best results. **Do NOT expose AM 125 to any fluctuating temperatures; AM 125 works best when kept at a constant 73 degrees F. Re-cap the containers immediately after pouring. Store AM 125 at 72F/room temperature. AM125 HAS A 60 DAY SHELF LIFE ONCE CONTAINERS ARE OPENED.** Great for first time mold makers. Widely used for making soap and candle molds. NOTE: THIS PRODUCT IS NOT ELIGIBLE FOR AMAZON FREE SHIPPING.

  • Brand: AeroMarine Products
  • ASIN: B0047R0LQA
  • UPC: 609465398945

Smooth-Cast 300 Liquid Casting Plastic - Gallon Unit

Smooth-Cast 300 Liquid Casting Plastic - Gallon

Smooth Cast 300 is a liquid plastic ,ultra-low viscosity casting resin that yields castings that are bright white and virtually bubble-free. Vacuum degassing is not necessary. It offers the convenience of a one to one mix ratio (by volume). 3 minute pot life: 10 minute demold time: Mixed viscosity 80 cps: 70D shore hardness Fully cured castings are tough, durable, machinable and paintable. Read MSDS before use - Adult Supervision Required. Keep Out of the Reach of Children - for more information visit www.smooth-on.com

  • Brand: Smooth-On
  • ASIN: B0742MBCH3
  • UPC: 751635476615

Alumilite Amazing Mold Rubber Kit High Strength Liquid Mold Rubber Making Kit

Alumilite Amazing Mold Rubber Kit High Strength Liquid

Amazing Mold rubber is a quick curing, extremely high strength, low viscosity silicone mold making material that picks up amazing detail. Amazing Mold Rubber is very easy to use, does not require degassing, and can be demolded in as little as 2-4 hours. Great for pouring one piece molds with undercuts requiring a strong flexible material for demolding parts or for making complex multiple piece molds. Vaseline works as an excellent mold release when making multiple piece molds.

  • Brand: Pen Kit Mall
  • ASIN: B07J58DZ15

Smooth-Cast 300 Liquid Plastic Compound - Trial Unit

Smooth-Cast 300 Liquid Plastic Compound - Trial

Smooth Cast 300 is a liquid plastic ,ultra-low viscosity casting resin that yields castings that are bright white and virtually bubble-free. Vacuum degassing is not necessary. It offers the convenience of a one to one mix ratio (by volume). 3 minute pot life: 10 minute demold time: Mixed viscosity 80 cps: 70D shore hardness Fully cured castings are tough, durable, machinable and paintable. Read MSDS before use - Adult Supervision Required. Keep Out of the Reach of Children - for more information visit www.smooth-on.com

  • Color: White
  • Brand: Smooth-On
  • ASIN: B004BN7G0E
  • UPC: 751635476417

Crafter's Companion A20501 Amazing Casting Products Alumilite High Strength 3 Liquid Mold Making Rubber, 1-Pound, Pink

Crafter's Companion A20501 Amazing Casting Products Alumilite High

Alumilite Corp-High strength 3 liquid mold making rubber: pink. Perfect to use when you have the deepest undercuts! the high strength rubber is thin enough that it will pick up all the detail of your original without the need for vacuum or pressure casting. This package contains one pound of flexible mold-making rubber mix. Complies with ASTM d 4236-94 and LHAMA. Made in USA.

  • Color: Pink
  • Brand: Crafter's Companion
  • ASIN: B004BNA6VA
  • UPC: 717917211596

Environmental Technology 1/2-Pound Kit Casting' Craft Easymold Silicone Putty

Environmental Technology 1/2-Pound Kit Casting' Craft Easymold Silicone

Easymold silicone putty is ideal for a wide range of impression type mold applications, including castin'craft clear casting resin, easycast clear casting epoxy, wax, baking, chocolates, ice cubes, soap, plaster, air dry clay, concrete and low melt metals. Easymold is an easy to use, odor free, non-toxic, fda compliant - food grade, two component silicone putty.

  • Color: Clear
  • Brand: Environmental Technology
  • ASIN: B004Y46GX8
  • UPC: 033331337002

Silicone Mold Making Kit - Creative Silicone Molds for Art Projects and DIY - Includes Silicone Liquid Rubber Compound - Ideal for Copies, Home or Industrial Use

Silicone Mold Making Kit - Creative Silicone Molds

Our products are developed and tested under highest conditions, being certified by all necessary standards of quality, in order to meet the rigorous expectations of our customers. The selection of our suppliers and manufacturers is based on careful screening processes that guarantee excellent products. Why should you purchase this item? Order this silicone mold making kit for creating lovely sculptures or replicas, use them as gifts to impress your loved ones or simply to decorate your room or home, and you’ll be amazed at the gorgeous results! This silicone set can be used for industrial projects as well, its low viscosity, easy mixing and one-on-one scale being perfect for the job. Some of the amazing features of this product: Premium quality materials; Perfect for beginners and experienced; One-on-one scale; Pot life:30 minutes; Demold: 6 hours; For best results, store at room temperature. ADD TO CART NOW and you’ll fall in love instantly with this silicone mold set!

  • Brand: Beckly
  • ASIN: B07FXBTC1Z
  • UPC: 754235562863

Cast-A-Mold 25T Silicone Rubber (1 Gallon)

Cast-A-Mold 25T Silicone Rubber (1

RTV Silicone Mold Making Rubber for Resin CastingCast-A-Mold 25T is a general purpose rtv silicone elastomer which exhibits excellent tear strength, long library life, and accurate detail reproduction. Cast-A-Mold 25T is a condensation cured silicone (tin catalyzed ) It is used to make rubber molds that can be used to cast polyurethanes, epoxy's, polyester's, cement, concrete, soap, wax, plaster, etc.. It is easy to mix and de-air, and will cure at room temperature over virtually any surface. Cast-A-Mold 25T is extremely useful for applications where superior physical properties are required. Properties:Product: Cast-A-Mold 25T Mix Ratio: 10:1 by weight Working Time: 3.0 hours Demold Time: 16 hour Heat Deflection: 300 f + Tensile Strength, psi: 660 Elongation %: 390 Tear Resistance, ppi: 140 Color: Green Hardness: A-25 Viscosity: 40,000 cpsWe typically ship same day when orders are received by 2 pm EST Monday-Friday

  • Color: Blue
  • Brand: Specialty Resin & Chemical
  • ASIN: B008UVMWKC
  • UPC: 661799648653

Smooth-On Universal Mold Release 14 fl. oz.

Smooth-On Universal Mold Release 14 fl.

If you've ever been to the movies, admired a piece of sculpture, marveled at detailed architectural ornamentation or used a telephone; then you've encountered the handiwork of people who use Smooth-On rubbers, plastics, foams and other products to turn their ideas into 3-dimensional reality. Universal Mold Release Agent is formulated especially for mold making and casting, and works well with most liquid rubber and liquid plastic products. It will release mold rubbers (such as polyurethanes and polysulfides) from properly prepared models. Sealing porous models (wood, plaster, concrete) or certain modeling clays (containing water or sulfur) with Smooth-On SuperSeal or other sealer may be necessary. Universal Mold Release is effective over a broad temperature range from 70°F to 500°F. Features If using silicone rubber, seal model surface with SuperSeal only. Do not use Universal Mold Release. Universal Mold Release also easily releases a variety of casting materials (epoxies, Smooth-On liquid plastics, etc.) from cured rubber molds. This product has a limited shelf life and should be used as soon as possible. Properly used, Universal Mold Release improves molding efficiency for a variety of casting applications and will actually lengthen the life of your production mold. Adult Su...

  • Color: Clear
  • Brand: Smooth
  • ASIN: B004BNHLOK
  • UPC: 751635700109

Cast-A-Mold 25T Silicone Rubber 1/2 Gallon Kit

Cast-A-Mold 25T Silicone Rubber 1/2 Gallon

RTV Silicone Mold Making Rubber for Resin CastingCast-A-Mold 25T is a general purpose rtv silicone elastomer which exhibits excellent tear strength, long library life, and accurate detail reproduction. Cast-A-Mold 25T is a condensation cured silicone (tin catalyzed ) It is used to make rubber molds that can be used to cast polyurethanes, epoxy's, polyester's, cement, concrete, soap, wax, plaster, etc.. It is easy to mix and de-air, and will cure at room temperature over virtually any surface. Cast-A-Mold 25T is extremely useful for applications where superior physical properties are required. Properties:Product: Cast-A-Mold 25T Mix Ratio: 10:1 by weight Working Time: 3.0 hours Demold Time: 16 hour Heat Deflection: 300 f + Tensile Strength, psi: 660 Elongation %: 390 Tear Resistance, ppi: 140 Color: Green Hardness: A-25 Viscosity: 40,000 cpsWe typically ship same day when orders are received by 2 pm EST Monday-Friday

  • Color: blue
  • Brand: Specialty Resin & Chemical
  • ASIN: B01GW3JL6C
  • UPC: 712038114726

Environmental Technology 33720 1-Pound Kit Casting' Craft Easymold Silicone Rubber

Environmental Technology 33720 1-Pound Kit Casting' Craft Easymold

Fad compliant - food grade ideal for a wide range of impression type mold applications casting resin and epoxy, wax, baking, chocolates, ice cubes, soap, plaster, air dry clay, concrete and low melt metals. For use in jewelry making including pendants, charms and earrings. 45 minute to 1 hour working time, 24 hour cure. Produces extremely fine detail from original. High heat range, up to 400 degrees Fahrenheit. No shrinkage. Self-releasing, no mold release agent required for most applications. Complete instructions and project ideas enclosed. Strong, flexible reusable molds.

  • Brand: Environmental Technology
  • ASIN: B003CHMZYM
  • UPC: 033331337200

Smooth-On OOMOO 25 Silicone Moldmaking Rubber - Trial Unit

Smooth-On OOMOO 25 Silicone Moldmaking Rubber - Trial

Smooth-On OOMOO 25 Trial Unit 2 Pint Kit - Tin cure Silicone. Liquid rubber.

  • Color: blue
  • Brand: Smooth On, Inc.
  • ASIN: B00H3QO7K8
  • UPC: 751635822412

Cast-A-Mold 25T Silicone Rubber (1 Quart)

Cast-A-Mold 25T Silicone Rubber (1

RTV Silicone Mold Making Rubber for Resin CastingCast-A-Mold 25T is a general purpose rtv silicone elastomer which exhibits excellent tear strength, long library life, and accurate detail reproduction. Cast-A-Mold 25T is a condensation cured silicone (tin catalyzed ) It is used to make rubber molds that can be used to cast polyurethanes, epoxy's, polyester's, cement, concrete, soap, wax, plaster, etc.. It is easy to mix and de-air, and will cure at room temperature over virtually any surface. Cast-A-Mold 25T is extremely useful for applications where superior physical properties are required. Properties:Product: Cast-A-Mold 25T Mix Ratio: 10:1 by weight Working Time: 3.0 hours Demold Time: 16 hour Heat Deflection: 300 f + Tensile Strength, psi: 660 Elongation %: 390 Tear Resistance, ppi: 140 Color: Green Hardness: A-25 Viscosity: 40,000 cpsWe typically ship same day when orders are received by 2 pm EST Monday-Friday

  • Color: blue
  • Brand: Specialty Resin & Chemical
  • ASIN: B008UW7IIM
  • UPC: 661799648677
Similar Rubber Mold Cast Results
Rubber Mold Cast Video Results
           

Prop Making Tips: Casting A Rubber Coffee Cup Action Prop

Rubber Mold Cast

Inspired by my upcoming career day appearance, my daughters and I created this tutorial to show how to make fight scene props. At the end of the tutorial my lovely daughters showcase their action props in proper context. We use PlatSil 71-10 to make a mold of a coffee cup and then we reproduce th...

Tags: prop making,platsil 71-10,pt flex casting rubbe...

How to Mold and Cast a Lightsaber!

Rubber Mold Cast

This video was brought to you by Premium memberships on Tested. Thanks to our members who've supported us. Learn more about memberships here: http://www.tested.com/membership Frank Ippolito joins us at Adam's shop for another step-by-step tutorial in prop making. This time, we learn how to make ...

Tags: testedcom,tested,how to,mold,cast,two part mold...

HOW IT´S MADE - VULCANIZED SILICONE RUBBER MOLD

Rubber Mold Cast

Thank you for 5:41 min of your time. My work on Instagram ► https://www.instagram.com/pablocimadevila Music in my videos ►https://goo.gl/iJK1R1 Best music library for your Youtube channel Today I´m going to show you how to make a vulcanized silicone rubber mold for jewelry. Thank you for your su...

Tags: como hacer molde joyería,silicone,silicone rubb...