GPM Traxxas 1/16 Mini E-Revo Upgrade Parts Aluminum Rear Wheelie Bar - 1Set Silver

GPM Traxxas 1/16 Mini E-Revo Upgrade Parts Aluminum

Traxxas 1/16 Mini E-Revo Upgrade Parts Aluminum Rear Wheelie Bar - 1Set Silver

  • Brand: GPM
  • ASIN: B00LYVFP9K

Traxxas 1/16 Mini E-Revo Upgrade Parts Aluminum Rear Wheelie Bar - 1 Set Gray Silver

Traxxas 1/16 Mini E-Revo Upgrade Parts Aluminum Rear

Traxxas 1/16 Mini E-Revo Upgrade Parts Aluminum Rear Wheelie Bar - 1 Set Gray Silver

  • Brand: GPM
  • ASIN: B07Q2CDXWN

Tamiya Lunch Box Upgrade Parts Aluminum Rear Wheelie Bar - 1 Set Gray Silver

Tamiya Lunch Box Upgrade Parts Aluminum Rear Wheelie

Tamiya Lunch Box Upgrade Parts Aluminum Rear Wheelie Bar - 1 Set Gray Silver

  • Brand: GPM
  • ASIN: B011BDFD24

Hot Racing VXS133M01 Spring Loaded 3 Tires Wheelie Bar - Traxxas 1/16

Hot Racing VXS133M01 Spring Loaded 3 Tires Wheelie

Hot Racing optional spring loaded 3 tire skid plate wheelie bar for use on the Traxxas 1/16 E-Revo, 1/16 Slash 4X4, 1/16 Summit, 1/16 Rally, and other Traxxas 1/16 vehiclesFEATURES: - Aluminum construction with 3 spring loaded rubber tires- Aluminum skid plate- Aluminum is anodized silver and black in colorYOU WILL RECEIVE: - One (1) wheelie bar assemblyREQUIREMENTS: - Installation onto vehicle- Recommended to use a removable-type locking adhesive on screws threading into metalSPECIFICATIONS: - Tire diameter: 22mm- Tire width: 4mmCOMMENTS: - See Hot Racing RVXS133W for two (2) replacement/spare tiresdescription revised by: SN June 26, 2015

  • Brand: Hot Racing
  • ASIN: B0077EC4MY
  • UPC: 083745614336

Tamiya Lunch Box Upgrade Parts Aluminum Rear Wheelie Bar - 1 Set Silver

Tamiya Lunch Box Upgrade Parts Aluminum Rear Wheelie

Tamiya Lunch Box Upgrade Parts Aluminum Rear Wheelie Bar - 1 Set Silver

  • Brand: GPM
  • ASIN: B011BDFNPG

Traxxas 67086-4 Stampede 4X4 1/10 Monster Truck with TQi 2.4GHz Radio/TSM, Silver

Traxxas 67086-4 Stampede 4X4 1/10 Monster Truck with

The Stampede 4X4 VXL turns extreme power into unbelievable monster truck fun! Traxxas stability management allows arrow-straight acceleration on slippery surfaces without loss of control. Tsm also makes high speed cornering corrections in the background for you, without unexpected side effects. The Velineon brushless system enables Stampede 4X4 to shatter the speedometer with 60+mph speed! Stampede 4X4 is built Traxxas tough with a shaft-driven 4WD system and modular design of the Slash 4X4. A single center driveshaft connects the front and rear drive assemblies for maximum power transfer. The modular design allows the entire front or rear section to be removed with just a few screws. Stampede's ground clearance increases off-road versatility, allowing you to tackle rough terrain and obstacles. Waterproof electronics allow Stampede to conquer wet and muddy trails with no regard for the weather. The Velineon VXL-3s ESC works with the 3500 motor for extreme power, smooth starts, and precise control while its brushless design reduces wear and friction. The VXL-3s offers 3 driving modes: sport, race, and training mode. Training mode limits power to 50% to allow new drivers to gain experience. Velineon accepts standard 7-cell NiMH batteries up to 3S 11.1V LiPos with its integrated low...

  • Color: Silver
  • Brand: Traxxas
  • ASIN: B073WRYPY1
  • UPC: 020334674517

King Motor Wheelie Bar (silver) Fits HPI Baja 5B 5T SS 2.0 and King Motor and Rovan Baja vehicles

King Motor Wheelie Bar (silver) Fits HPI Baja

A must for high performance engines, drag racing, etc... Mounts using 6 original screws in the lower rear chassis plate These are a direct bolt-on for any Baja type vehicle like the HPI Baja 5B 5T SS 2.0 and King Motor and Rovan Baja vehicles May fit other clone Baja's as well

  • Color: Silver
  • Brand: King Motor RC
  • ASIN: B011AJ5IT2
  • UPC: 736846120083

Razor A3 Kick Scooter - Clear - FFP

Razor A3 Kick Scooter - Clear -

The original kick scooter just got a whole lot better, making it even more fun for kids and teens alike. Though it'll never replace the internal combustion engine, the Razor A3 will get your child from point a to point B much quicker than on foot alone, and requires just a few scoots of one's shoes in the process. Plus, it's a blast to use, as your progeny will likely attest. The Razor A3 is made of aircraft-grade aluminum, a sturdy material that holds up to use and abuse through the years. Razor combined the traditional aluminum construction, however, with a number of recent innovations, including a springless shock-absorbing system that makes bumpy pavement feel smoother than ever and an all-new wheelie bar that guarantees an extra dollop of fun. Add in such details as 125 mm urethane wheels, ABEC-5 high-speed bearings, a patented rear fender brake, and a patented folding mechanism and you have a great kick scooter for virtually any situation. This version of the Razor A3, which supports up to 143 pounds and is recommended for ages 5 and older.

  • Color: Clear
  • Brand: Razor
  • ASIN: B01EN6LX4I
  • UPC: 845423018078

Integy RC Model Hop-ups T7983SILVER Alloy Gearbox Housing for Traxxas 1/10 Stampede 2WD, Rustler 2WD & Bandit XL5

Integy RC Model Hop-ups T7983SILVER Alloy Gearbox Housing

OVERVIEW: Add some flashy looks to your ride and upgrade performance and durability at the same time with our Alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined, and the aluminum alloy parts are available with an anodized finish in multiple colors to help match your color scheme. NOTE: Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Shimming may be required for perfect alignment and fitment. Some parts may require some permanent modification to the vehicle for fitment. Some parts may eliminate certain OEM features. Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. Before installation, please check metal-to-metal fasteners for tightness, and use liquid threadlock when required, as some components are assembled for packaging purposes only. Item T7983SILVER Barcode: 91789005337

  • Brand: Integy
  • ASIN: B00XSDV6OU

Integy RC Model Hop-ups C25582BLUE Billet Machined Front Bumper w/LED Lights for Traxxas 1/10 Revo 3.3 & E-Revo

Integy RC Model Hop-ups C25582BLUE Billet Machined Front

OVERVIEW: Replace the stock plastic front bumper on your 1/10-scale Traxxas E-Revo or Revo 3. 3 monster truck with our Billet Machined Front Bumper w/LED Driving Lights. Aside from the alloy construction and multiple color choices, the bumper features newly integrated LED driving lights and a pre-wired LED harness for easy installation. The bumpers are available anodized in blue, green, gunmetal, orange, red, or silver. NOTE: Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Shimming may be required for perfect alignment and fitment. Some parts may require some permanent modification to the vehicle for fitment. Some parts may eliminate certain OEM features. Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. Before installation, please check metal-to-metal fasteners for tightness, and use liquid threadlock when required, as some components are assembled for packaging purposes only. Item C25582BLUE Barcode: 91789020342

  • Brand: Integy
  • ASIN: B00O33JP2E
  • UPC: 917890203421

Part & Accessories Hot Racing 1/16 Rally Slash Aluminum Wheelie Bar VXS133M01

Part & Accessories Hot Racing 1/16 Rally Slash

This is the optional Hot Racing Spring Loaded removable Wheelie Bar for use on the 1/16 Rally or Slash Features: Rear Aluminum Skid plate with removable 2 wheel wheelie bar Alum construction with rubber wheel Anodized Black and Silver in color YOU WILL RECEIVE: One Wheelie Bar with wheels REQUIREMENTS: Installation on the vehicle COMMENTS: Control front to Rear motion of the chassis not to unload the rear wheels Aids as a suspension to the rear wheels NOTE: Locktite is highly recommended for the screws that attach to the wheels Shipping: Item specifics:Use: Vehicles & Remote Control ToysFour-wheel drive attributes: AssemblageFor vehicle type: CarsRemote control peripherals/devices: ReceiversUpgrade parts/accessories: Hydraulic Transmission BoxTechnical parameters: KV1100Rc parts & accs: Motor ComponentsTool supplies: GluingMaterial: Metal

  • Brand: Halica
  • ASIN: B07TJ15YQ8

Integy RC Model Hop-ups C27656SILVER Realistic Alloy Machined Scale Front Bumper w/LED Lights for Axial 1/10 SCX10 II

Integy RC Model Hop-ups C27656SILVER Realistic Alloy Machined

OVERVIEW: Axial SCX10 II owners can add our new Realistic Alloy Machined Front Bumper w/LED Lights to their rig for an instant upgrade on looks and functionality. The bumper includes two pairs of LED driving lamps (LED harness is included) , realistic metal D-rings, and is pre-drilled to bolt an optional scale winch. The ''High Hoop'' front bumper is available in black, gunmetal, or silver. NOTE: Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. All products require some prep out of the package - some components are assembled for packaging purposes only, so we strongly recommend that you check all metal-to-metal fasteners for tightness, check fitment and adjust if needed, and use liquid threadlock where applicable. Failure to do so is not a warranty-related incident. Extra hardware, shims, or spacers may be required for some installations. Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features. Items that are different from `the OEM part (such as our snow & sand conversions, piggyback shocks, EXT suspension, or extended wheel hubs) may require modification to the vehicle for proper clearance. Some Integy-branded items may be only compati...

  • Brand: Integy
  • ASIN: B076DSM8LH
  • UPC: 917890288725

Square R/C RC Model Hop-ups SQ-SGE-18S Square R/C Aluminum Wheel Spacers, 0.5mm/1mm Thick (Silver) 4 pcs.

Square R/C RC Model Hop-ups SQ-SGE-18S Square R/C

These are Aluminum wheel spacers by Square R/C. Used to fine tune the handling of your touring car by increasing the track width in 0.5mm or 1.0mm increments. Package includes four 0.5mm spacers and four 1.0mm spacers. Item SQ-SGE-18S Barcode: 4543880101390

  • Brand: Square R/C
  • ASIN: B07G2X51PQ

Integy RC Model Hop-ups T8091SILVER V2 Alloy Chassis Conversion Set for Traxxas 1/10 Electric Slash 2WD

Integy RC Model Hop-ups T8091SILVER V2 Alloy Chassis

OVERVIEW: Transform the performance and looks of your stock 1/10-scale Traxxas Slash 2WD truck with our new Billet Machined Alloy Chassis Conversion Set. This chassis conversion features an alloy main frame, carbon fiber front mount, and a spring loaded battery holder with quick-release strap. The conversion set is available in silver, green, orange, grey, or red anodized finishing. (Fits 6-cell NiMH stick pack / standard 2S / slim 3S Lipo packs only. This conversion set can be adapted to fit the 1/10 Slash 2WD LCG version.) NOTE: Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Shimming may be required for perfect alignment and fitment. Some parts may require some permanent modification to the vehicle for fitment. Some parts may eliminate certain OEM features. Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. Before installation, please check metal-to-metal fasteners for tightness, and use liquid threadlock when required, as some components are assembled for packaging purposes only. Item T8091SILVER Barcode: 91789006435

  • Brand: Integy
  • ASIN: B001V7W0RM

Integy RC Model Hop-ups C28433RED Rear Sway Bar Anti-Roll Bar Set for Traxxas X-Maxx 4X4

Integy RC Model Hop-ups C28433RED Rear Sway Bar

OVERVIEW: Increase performance and dial in your Traxxas X-Maxx handling with our Rear Anti-Roll Stabilizer Kit. This set helps you control chassis roll for those times when you need less articulation and more stability. The Anti-Roll Stabilizer Kit for Traxxas X-Maxx includes alloy mounting brackets and adjustable sway bar links, and is available in blue, green, grey, orange, red or silver. Note: If you do not know how to assemble or install this product, please ask your local dealer for assistance. All products require some prep out of the package - some components are assembled for packaging purposes only, so we strongly recommend that you check all metal-to-metal fasteners for tightness, check fitment and adjust if needed, and use liquid threadlock where applicable. Failure to do so is not a warranty-related incident. Extra hardware, shims, or spacers may be required for some installations. Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features. Items that are different from the OEM part (such as our snow & sand conversions, piggyback shocks, EXT suspension, or extended wheel hubs) may require modification to the vehicle for proper clearance. Some Integy-branded items may be only compatible with the vehicle's OEM parts ...

  • Brand: Integy
  • ASIN: B07KCPB3B5
  • UPC: 091789033938

Hot Racing Xmx311X06 Aluminum Sway Bar, Front Or Rear, for X-Maxx

Hot Racing Xmx311X06 Aluminum Sway Bar, Front Or

Hot Racing anti-sway bar kit for Traxxas X-Maxx 6S and 8S vehicles equipped with the Hot Racing XMX55X01 lower suspension arms FEATURES: - Fits the front or rear on vehicles equipped with the Hot Racing XMX55X01 lower suspension arms - Improved steering response and cornering handling and gives the vehicle an overall more responsive and direct feel - Includes three steel anti-roll bar options, including: soft (silver), medium (blue), and firm (red) - CNC machined aluminum links and center mount, anodized blue YOU WILL RECEIVE: - One (1) soft bar 2. 6mm (silver) - One (1) medium bar 2. 8mm (blue) - One (1) firm bar 3mm (red) - Two (2) links - Center bar mount - Mounting hardware REQUIREMENTS: - Hot Racing XMX55X01 lower suspension arms are REQUIRED - Do not over-tighten the center bar mount. The bar should rotate freely in the mount and not bind. COMMENTS: - This kit requires the Hot Racing XMX55X01 lower suspension arms!

  • Color: N/a
  • Brand: Hot Racing
  • ASIN: B01KIN2DXA
  • UPC: 083745861006

Integy RC Model Hop-ups C28432SILVER Front Sway Bar Anti-Roll Bar Set for Traxxas X-Maxx 4X4

Integy RC Model Hop-ups C28432SILVER Front Sway Bar

OVERVIEW: Increase performance and dial in your Traxxas X-Maxx handling with our Front Anti-Roll Stabilizer Kit. This set helps you control chassis roll for those times when you need less articulation and more stability. The Anti-Roll Stabilizer Kit for Traxxas X-Maxx includes alloy mounting brackets and adjustable sway bar links, and is available in blue, green, grey, orange, red or silver. Note: If you do not know how to assemble or install this product, please ask your local dealer for assistance. All products require some prep out of the package - some components are assembled for packaging purposes only, so we strongly recommend that you check all metal-to-metal fasteners for tightness, check fitment and adjust if needed, and use liquid threadlock where applicable. Failure to do so is not a warranty-related incident. Extra hardware, shims, or spacers may be required for some installations. Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features. Items that are different from the OEM part (such as our snow & sand conversions, piggyback shocks, EXT suspension, or extended wheel hubs) may require modification to the vehicle for proper clearance. Some Integy-branded items may be only compatible with the vehicle's OEM parts...

  • Brand: Integy
  • ASIN: B07KCTXM75

Integy RC Model Hop-ups C26455PURPLE Billet Machined Front Rocker Arms for Twin Hammers 1.9 Rock Racer

Integy RC Model Hop-ups C26455PURPLE Billet Machined Front

If you own a Vaterra 1/10-scale Twin Hammers Rock Racer, we now have new Billet Machined Front Rocker Arms for you. The alloy front rocker arms easily bolt in place of your factory rockers, and add strength and good looks. The front rocker arms are sold in pairs, and are available in blue, green, grey, orange, purple, red, or silver anodized finishes. NOTE: Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. All products require some prep out of the package - some components are assembled for packaging purposes only, so we strongly recommend that you check all metal-to-metal fasteners for tightness, check fitment and adjust if needed, and use liquid threadlock where applicable. Failure to do so is not a warranty-related incident. Extra hardware, shims, or spacers may be required for some installations. Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features. Some Integy-branded items may be only compatible with the vehicle's OEM parts but not with another Integy-branded item due to design language. For multiple-fitment items, some parts may not be used based on application. Item C26455PURPLE Barcode: 91789024047

  • Brand: Integy
  • ASIN: B01KKJO1ZA

Integy RC Model Hop-ups C28034ORANGE Carbon Steel Rear Universal Shaft (2) for Traxxas 1/10 Slash & Stampede 4X4

Integy RC Model Hop-ups C28034ORANGE Carbon Steel Rear

OVERVIEW Strengthen the drivetrain of your Traxxas 1/10 Slash 4X4 or Stampede 4X4 with our Carbon Steel Universal Shafts. The drive shafts feature a sliding spline design with heavy duty universal joints and anodized alloy collars. Sold in pairs, the drive shafts are available in black, blue, green, gunmetal, orange, red, or silver. (Front is #C28033, rear is #C28034) NOTE: If you do not know how to assemble or install this product, please ask your local dealer for assistance. All products require some prep out of the package - some components are assembled for packaging purposes only, so we strongly recommend that you check all metal-to-metal fasteners for tightness, check fitment and adjust if needed, and use liquid threadlock where applicable. Failure to do so is not a warranty-related incident. Extra hardware, shims, or spacers may be required for some installations. Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features. Items that are different from the OEM part (such as our snow & sand conversions, piggyback shocks, EXT suspension, or extended wheel hubs) may require modification to the vehicle for proper clearance. Some Integy-branded items may be only compatible with the vehicle's OEM parts but not with another In...

  • Brand: Integy
  • ASIN: B07CV3L7YP
  • UPC: 917890301172

Integy RC Model Hop-ups T3418SILVER Motor Mount/Gear Cover for 1/16 Traxxas E-Revo VXL,Slash VXL,Summit VXL,Rally

Integy RC Model Hop-ups T3418SILVER Motor Mount/Gear Cover

OVERVIEW: Replace your stock Traxxas 1/16-scale E-Revo VXL , Slash VXL, Summit VXL, or Rally motor mount / gear cover with our machined aluminum piece. Our gear cover offers more protection than the standard molded piece, and is available in blue, silver, red, gunmetal, orange, and green. Item T3418SILVER Barcode: 91789007512

  • Brand: Integy
  • ASIN: B00306SVPW
Similar Silver Aluminum Wheelie Bar Results
Silver Aluminum Wheelie Bar Video Results
           

Integy Alloy Wheelie Bar Silver for 1/10 E Revo brushless

Silver Aluminum Wheelie Bar

NEW Integy Alloy Wheelie Bar Silver Revo T3277SILVER!!! Quick Review on it..... Will do another video once installed!!!!

Tags: 1/10 E Revo brushless,Integy,Wheelie Bar,3.8 Pr...

Galamoth - Traxxas Stampede - Level 15 Upgrade - Aluminum Wheelie Bar Wheels

Silver Aluminum Wheelie Bar

Donation from MadBassMassacre : https://www.youtube.com/user/madbassmassacre Upgrade : Traxxas Red Aluminum Wheelie Bar Wheels #5186 Total Cost Of Upgrades I Spent So Far : $122.00

Tags: darkeclipticheart,traxxas,stampede,2wd,red,alum...

Creature - Traxxas Slash - Level 41 Upgrade - Aluminum Wheelie Bar Wheels

Silver Aluminum Wheelie Bar

Donated by That_White Kid Upgrade : Traxxas Blue Aluminum Wheelie Bar Wheels TRA#5186A Total Cost Of Upgrades I Spent So Far : $182.00

Tags: darkeclipticheart,creature,traxxas slash,2wd,4x...