Channel Master CM-9025 3-Inch Heavy-Duty Wall Mount for TV Antenna Masts

Channel Master CM-9025 3-Inch Heavy-Duty Wall Mount for

The Channel Master CM 9025 is a heavy duty 3 inch wall mount designed to handle large diameter masts and withstand wind forces. The Channel Master 9025 wall mount offers heavy duty steel construction and has 3 inches of standoff from the wall to allow the antenna mast to clear roof overhang. The CM 9025 includes lag bolts and can support a mast up to 2.5 inches in diameter. Channel Master recommends using guy wire for all antenna installations using masts over 10 feet.

  • Brand: Channel Master
  • ASIN: B001RCMEEA
  • UPC: 531479608430

Good Directions 585ST Stainless Steel Weathervane Mount for Eaves

Good Directions 585ST Stainless Steel Weathervane Mount for

Steel Eave Mount used to display all Standard Weathervanes - extends 5 Inch. This eave mount is made of durable steel; meant to last.

  • Color: Gray
  • Brand: Good Directions
  • ASIN: B000WCDX7I
  • UPC: 704940458593

Satellite Under Eave Mount 1 5/8 Non Penetrating Roof Mount For Outdoor Antennas.

Satellite Under Eave Mount 1 5/8 Non Penetrating

  • Brand: DRM
  • ASIN: B00B40BMQQ
  • UPC: 705422994769

JULLISON 8 Packs 6 Inch LED Low Profile Recessed & Surface Mount Disk Light, Round, 15W, 900 Lumens, 4000K Cool White, CRI80, Driverless Design, Dimmable, Energy Star, ETL Listed, White

JULLISON 8 Packs 6 Inch LED Low Profile

AC DISK LIGHT DESCRIPTION:JULLISON LED DOB DISK LIGHT SURFACE MOUNT INSTALLATION:Step1) Prior to installation. Please install two screws (furnished)into the junction box. Do not drive screws completely to the end of the junction box.Step2) Connect supply wires to wires in fixture wiring box with proper size wire nuts or push wires into "push-in" connector. Connect white to white, black to black, and green or bare copper wire to bare copper wire.Step3) The ground wire at the service junction box may need to be secured to a ground screw.Step4) With a Phillips screwdriver, attach the disk light tightly to the j-box.Step5) Complete the installation by twisting the diffuser on the disk light aluminum enclosure and lock the diffuser in place. Step6) The edge of the fixture and the ceiling use waterproof silicone to seal.WARNING:For your safety read and understand instructions completely before starting installation. Before wiring to power supply, turn off electricity at the fuse or circuit breaker box.1. Risk of Fire:supply conductors (power wires) connecting the fixture must be rated minimum 90℃. If uncertain, consult an electrician.2. Risk Of Electric Shock: disconnect power at fuse or circuit breaker before installing or servicing.3. Risk Of Fire/Electric Shock: if not qualified,...

  • Color: 4000K Cool White
  • Brand: JULLISON
  • ASIN: B07C1V4CFN
  • UPC: 607994071896

Winegard SW-0012 Gable End Mount for Antenna

Winegard SW-0012 Gable End Mount for

Winegard Sw-0012 Gable End Mount

  • Color: One Color
  • Brand: Winegard
  • ASIN: B001DFTGUQ
  • UPC: 777786197896

Air King 9314 14-Inch Industrial Grade High Velocity Multi Mount Fan

Air King 9314 14-Inch Industrial Grade High Velocity

The Air King 9314 14-Inch Industrial Grade High Velocity Multi Mount Fan can be mounted on walls, ceilings, I-beams and more, making these fans perfect for loading docks, restaurants, plants, health clubs and industrial areas where floor and table space is limited. The 14-inch, 3-blade pivoting head fan has powder coated steel blades, guard and mount. The pull cord switch located on the back allow you to turn the fan on or off and change between speeds. The 1/20-horsepower, fully enclosed, single phase, permanently lubricated three speed motor provides a quiet performance and produces ample air flow. Additionally, this fan is ETL and OSHA approved and a 9-foot, 3-conductor type S power cord is provided for long reach. Secondary support cable included. Tested in accordance with AMCA standard 230-99. Meets Made in America requirements of ARRA. The 9314 measures 18-inches long by 8.88-inches wide by 18.25-inches high and weighs 14.3-pounds. Moves 1180, 1470 and 1650 CFM on low, medium and high speeds. Operates at 934 rpm, .4 amps, 48 watts and 48 decibels on low speed. Operates at 1296 rpm .5 amps, 56 watts and 55 decibels on medium speed. Operates at 1490 rpm, .6 amps, 63 watts and 58 decibels on high speed. The Air King 9314 14-Inch Industrial Grade High Velocity Multi Mount Fan c...

  • Color: Black
  • Brand: Air King
  • ASIN: B000227NK6
  • UPC: 046013397201

Misting System-Low Pressure Misting Fan Kit - Pre- Assembled Misting System - Fan Misting Kit for Outdoor Cooling - Brass/Stainless Steel Nozzle - 15 inch Diameter Ring - 6 nozzles

Misting System-Low Pressure Misting Fan Kit - Pre-

MistCooling's low pressure mist fan kit is designed with your budget in mind. This is the perfect solution for your backyard cooling needs. It operates on water pressure of 40-100 PSI. This item comes with leak proof compression fittings and will hook onto any standard garden hose. Pre-assembly makes it perfect for easy and quick installation. Low Pressure Nozzles are included 0.015- ( Fan not Included)

  • Color: Beige
  • Brand: Mistcooling
  • ASIN: B01C6BE74K
  • UPC: 742230547787

Lifetime 73650 44 Inch Shatterproof Backboard and Rim Combo Kit

Lifetime 73650 44 Inch Shatterproof Backboard and Rim

  • Color: Blue/white
  • Brand: Lifetime
  • ASIN: B0000AE6QU
  • UPC: 756317034121

Polk Audio Atrium 6 Outdoor Speakers with Bass Reflex Enclosure (Pair, White) - All-Weather Durability | Broad Sound Coverage | Speed-Lock Mounting System

Polk Audio Atrium 6 Outdoor Speakers with Bass

A workhorse when it comes to filling large spaces with the kind of big, lifelike high quality sound for all your outdoor entertainment. Built to withstand the elements, which means you’ll be enjoying great performance for years to come.Built to withstand the worst elements—salt-fog, UV, extreme temps or heavy rains, you name it.This patented technology analyzes the speaker’s entire electro-acoustic and mechanical system for improved material selection and more efficient geometry. Aluminum grilles and bracket, with stainless steel and brass hardware means no rust—ever.

  • Color: White
  • Brand: PODG9
  • ASIN: B00378KMG4
  • UPC: 747192118860

iLIVING ILG8E18-15 Wall Mount Outdoor Waterproof Fan, 18", Black

iLIVING ILG8E18-15 Wall Mount Outdoor Waterproof Fan, 18",

The living wall-mounted moisture-resistant outdoor misting fan is ideal for cooling down your home, warehouse, coffee shop, loading dock, greenhouse, amusement Park, livestock building, or sporting event. The outdoor misting fan comes in two different sizes, 14 inch and 18 inch. The fan is designed for use both indoors and outdoors, is UL507 tested and rated for use with misting and fogging rings. It features a galvanized steel frame and curved aluminum fan blades for optimal air movement. Recommended for use with the living ilg-250 cooling system fan misting kit. Wall mount kit is included. Ulf listed.

  • Color: Black
  • Brand: Iliving
  • ASIN: B01I9BZ0TW
  • UPC: 856957005267
Similar Steel Eave Mount Results
Steel Eave Mount Video Results
           

How To Install Soffit And Fascia

Steel Eave Mount

Shannon from http://www.house-improvements.com shows you how to install soffit and fascia on your next home improvement DIY project.

Tags: soffit,fascia,eaves,eavestrough,gutters,howto,i...

Installing Drip Edge On Your Roof!

Steel Eave Mount

JOIN MY WEB SITE AT http://www.paulstoolbox.com

Tags: Roof repair,fascia repair,drip edge on fascia,r...

How to Install Eave & Fascia Metal Roofing Trim

Steel Eave Mount

Do you need to install eave or fascia for a metal roof? Here is a short video showing how.

Tags: metal roofing,metal siding,bridger steel,montan...