Ironwood Pacific HelmsMate Tiller Extension TE

Ironwood Pacific HelmsMate Tiller Extension

The HelmsMate Tiller Extension Handle allows you to sit away from your motor while maintaining full steering and throttle control.  Slides directly onto the tiller handle of gas and electric trolling motors.  Designed for trolling speeds only. HelmsMate Features Clamps directly to the tiller handle for full steering and throttle control Fits most gas and electric trolling motors up to 15 HP Extendable models incorporate a stainless snap button to withstand the twisting motion from shift and throttle control (remove when not applicable) Anodized aluminum tube, marine grade hardware, unbreakable nylon clamp Made in USA.  Lifetime warranty Instructions for Use Loosen thumb screws on the HelmsMate clamp, slide onto your tiller handle and tighten the thumb screws.  For larger diameter tiller handles remove the rubber sleeve, pull open the clamp at the flanges and slide onto the tiller handle.  For smaller tiller handles request the extra rubber sleeve that is available.  Once clamped to your motor check to make sure you have clear access to the kill button on the motor.   For extendable models, adjust the length by pressing the snap button and sliding the inner handle to the desired length. 

  • Color: Black
  • Brand: Ironwood Pacific
  • ASIN: B00MYSZQZU
  • UPC: 012302921891

Ironwood Pacific HelmsMate Tiller Extension U-Joint

Ironwood Pacific HelmsMate Tiller Extension

The HelmsMate Tiller Extension Handle allows you to sit away from your motor while maintaining full steering and throttle control.  Slides directly onto the tiller handle of gas and electric trolling motors.  Designed for trolling speeds only. HelmsMate Features Clamps directly to the tiller handle for full steering and throttle control Fits most gas and electric trolling motors up to 15 HP Universal joint model allows for easy push/pull steering  (remove when not applicable) Extendable models incorporate a stainless snap button to withstand the twisting motion from shift and throttle control (remove when not applicable) Anodized aluminum tube, marine grade hardware, unbreakable nylon clamp Made in USA.  Lifetime warranty Instructions for Use Loosen thumb screws on the HelmsMate clamp, slide onto your tiller handle and tighten the thumb screws.  For larger diameter tiller handles remove the rubber sleeve, pull open the clamp at the flanges and slide onto the tiller handle.  For smaller tiller handles request the extra rubber sleeve that is available.  Once clamped to your motor check to make sure you have clear access to the kill button on the motor.  For extendable models, adjust the length by pressing the snap button and sliding the inner handle to the desired length...

  • Color: Black
  • Brand: Ironwood Pacific
  • ASIN: B01E1B7Z2O
  • UPC: 525171220625

Ironwood Pacific HelmsMate Tiller Extension T

Ironwood Pacific HelmsMate Tiller Extension

The HelmsMate Tiller Extension Handle allows you to sit away from your motor while maintaining full steering and throttle control.  Slides directly onto the tiller handle of gas and electric trolling motors.  Designed for trolling speeds only. HelmsMate Features Clamps directly to the tiller handle for full steering and throttle control Fits most gas and electric trolling motors up to 15 HP Anodized aluminum tube, marine grade hardware, unbreakable nylon clamp Made in USA.  Lifetime warranty Instructions for Use Loosen thumb screws on the HelmsMate clamp, slide onto your tiller handle and tighten the thumb screws.  For larger diameter tiller handles remove the rubber sleeve, pull open the clamp at the flanges and slide onto the tiller handle.  For smaller tiller handles request the extra rubber sleeve that is available.  Once clamped to your motor check to make sure you have clear access to the kill button on the motor. 

  • Color: Black
  • Brand: Ironwood Pacific
  • ASIN: B009YN6US0
  • UPC: 090090104108

MinnKota MKA-44 Telescopic Extension Handle (24 - Inch - 40 - Inch)

MinnKota MKA-44 Telescopic Extension Handle (24 - Inch

Simply twist the handle to loosen, adjust and tighten our extension handles. Go from 24" to 40" and experience total speed and steering control in any situation. Fits all outboard and trolling motors.

  • Color: Black
  • Brand: Minn Kota
  • ASIN: B001PTHKPS
  • UPC: 066510909578

Ironwood Pacific HelmsMate Tiller Extension SE

Ironwood Pacific HelmsMate Tiller Extension

The HelmsMate Tiller Extension Handle allows you to sit away from your motor while maintaining full steering and throttle control.  Slides directly onto the tiller handle of gas and electric trolling motors.  Designed for trolling speeds only. HelmsMate Features Clamps directly to the tiller handle for full steering and throttle control Fits most gas and electric trolling motors up to 15 HP Extendable models incorporate a stainless snap button to withstand the twisting motion from shift and throttle control Anodized aluminum tube, marine grade hardware, unbreakable nylon clamp Made in USA.  Lifetime warranty Instructions for Use Loosen thumb screws on the HelmsMate clamp, slide onto your tiller handle and tighten the thumb screws.  For larger diameter tiller handles remove the rubber sleeve, pull open the clamp at the flanges and slide onto the tiller handle.  For smaller tiller handles request the extra rubber sleeve that is available.  Once clamped to your motor check to make sure you have clear access to the kill button on the motor.  For extendable models, adjust the length by pressing the snap button and sliding the inner handle to the desired length.

  • Brand: Ironwood Pacific
  • ASIN: B002VFBIWG
  • UPC: 782516471481

Brocraft Universal Joint Tiller Extension Handle/Telescoping 24"-40"

Brocraft Universal Joint Tiller Extension Handle/Telescoping

Enjoy the best seat in the boat with a Brocraft outboard tiller extension handle. Sit forward of your gas or electric trolling motor while maintaining full steering and throttle control. The all metal universal joint allows for easy push pull steering or can be locked into a fixed tiller extension. Unbreakable nylon clamp provides clear access to your kill button. Specifications: Length telescoped in: 24" Length telescoped out: 40" Universal Joint Material: Aluminum

  • Brand: Brocraft
  • ASIN: B01N6VU0NE
  • UPC: 744288084665

Brocraft Outboard/Trolling Motor Tiller Extension, 24-40" / Transom Mount Trolling Motor Extension

Brocraft Outboard/Trolling Motor Tiller Extension, 24-40" / Transom

Enjoy the best seat in the boat with a outboard tiller extension handle. Sit forward on your gas or electric trolling motor while maintaining full steering and throttle control. Unbreakable nylon clamp provides clear access to your kill button.

  • Brand: Brocraft
  • ASIN: B07F1PMBSB

Marine Boat TROLLING Motor Telescopic Extension Handle Anodized Aluminum 17"-25"

Marine Boat TROLLING Motor Telescopic Extension Handle Anodized

This is an telescopic Trolling Motor Extension Handle that can be extended from 17" to 25". The aluminum tube is made of anodized aluminum, and there is an anti-slipping PP grip at the end of the handle.This extension handle provides additional extension for convenient operation. It is lightweight and durable, and it is easy to be installed. Twist the handle to adjust to the desired length. It locks into place to fit most transom-mount trolling motors and most popular tiller engines.You can now experience total speed and steering control in any situation with this handle! Dimension: Length: 17"-25", Diameter: 2", and Diameter of the aluminum tube: 1-1/8". Item: PM616125 *Customers please note every computer shows colors differently. All measurements are approximate. *1 year Limited Product Warranty.

  • Brand: Pactrade Marine
  • ASIN: B074LGPMN4
  • UPC: 726549810381

Ironwood Pacific HelmsMate Tiller Extension B

Ironwood Pacific HelmsMate Tiller Extension

The HelmsMate Tiller Extension Handle allows you to sit away from your motor while maintaining full steering and throttle control.  Slides directly onto the tiller handle of gas and electric trolling motors.  Designed for trolling speeds only. HelmsMate Features Clamps directly to the tiller handle for full steering and throttle control Fits most gas and electric trolling motors up to 15 HP Anodized aluminum tube, marine grade hardware, unbreakable nylon clamp Made in USA.  Lifetime warranty Instructions for Use Loosen thumb screws on the HelmsMate clamp, slide onto your tiller handle and tighten the thumb screws.  For larger diameter tiller handles remove the rubber sleeve, pull open the clamp at the flanges and slide onto the tiller handle.  For smaller tiller handles request the extra rubber sleeve that is available.  Once clamped to your motor check to make sure you have clear access to the kill button on the motor. 

  • Color: Black
  • Brand: Ironwood Pacific
  • ASIN: B000BTEEVG
  • UPC: 696582436872

Davis Instruments Handi Mate Extension Handle

Davis Instruments Handi Mate Extension

Handi-Mate extension handle straight steering unit

  • Color: Silver
  • Brand: Davis Instruments
  • ASIN: B001449IBI
  • UPC: 011698006410
Similar Tiller Extension Handle Results
Tiller Extension Handle Video Results
           

Extend Your Tiller Handle (Trolling Extension Hack)

Tiller Extension Handle

Just a little hack on extending your tiller motor. The advantages are getting on plane quicker, better visibility, and having fun. Where to buy?: http://www.basspro.com/Bass-Pro-Shops-12-Fixed-Trolling-Motor-Extension-Handle/product/1310120631266/

Tags: Florida,Bass,FBF,fbf,Florida bass fishing,Flori...

Super LONG adjustable outboard tiller extension in use and review

Tiller Extension Handle

Outboard boat motor tiller extension handle diy outboard tiller extension handle. I Kendall Todd made this handle myself, and it worked. It was nice to use on the G3 jonboat it had welded aluminum, while driving in the water. I was using this in fort pierce florida. I was using a yamaha 25 h...

Tags: Tiller,outboard boat motor,outboard,boat motor,...

HelmsMate 18" Tiller Extension Handle - Pelican Bass Raider 10E - Suzuki 2.5HP 4 Stroke

Tiller Extension Handle

Installing a HelmsMate 18" Tiller Extension Handle on a Suzuki 2.5 HP 4-stroke motor for the Pelican Bass Raider 10E. This handle is the 18" fixed position handle. This handle allowed me to sit more comfortably in the Bass Raider 10E. Link on Amazon: http://a.co/e0DzRtz

Tags: pelican,bass,raider,10E,helmsmate,tiller,extens...