Voodoo Lab Pedal Power 2.1mm Current Doubler Adapter Cable

Voodoo Lab Pedal Power 2.1mm Current Doubler Adapter

The Voodoo Lab PPAP is for pedals with higher power requirements, use this current doubling adapter with a 2.1mm jack to combine two Pedal Power outputs. (Frequently used to combine outputs 5 & 6 on a Pedal Power 2+ to create a single 9V 500mA output.) This adapter will accept any cable with a 2.1mm plug.

  • Brand: Voodoo Lab
  • ASIN: B00FNY74V6

10 Pack Effects Pedal DC Power Patch Cables Cords Pedalboard 5.5mm / 2.1mm 18AWG

10 Pack Effects Pedal DC Power Patch Cables

Power cables for your effects pedals. We couldn't find any reasonable way to buy custom length dc power cables for your pedalboard so we got these made for us. The two significant things to know about them are that the pack has 5x 18" and 5x 24" and all the cables are made with 18AWG copper wire. They are one right angle (for your effect dc in) and one straight (for your brick dc out)...that is the way they all should be...all the time.They may appear like every other power cable that comes with your DC brick, but under the hood, there's enough thick conductor to assure no voltage loss even when you feeding current hungry Digital Reverbs, Optical Compressors or Delays. Other cables may look thicker, but only because of more layers of PVC or PE insulation. The industry standard is 22AWG (thinner than these)...have a look at the last photo showing these cables compared to three other ones that come packaged with power supplies. The thicker cable is especially important when you're using non-isolated power supplies that share the current across all the outputs. Overdrives and Distortion pedals typically only need 20-50ma to run, but reverbs, delays, vibes and optical circuits (tremolos, compressors etc) can need 100-200ma. If they don't get it they start to make weird ticking noises...

  • Brand: Iconic Cables
  • ASIN: B01GQV8W0G
  • UPC: 731882418293

Mr.Power Guitar Effect Pedal DC Cable 2.1 mm Power Lead/cord Pack of 8

Mr.Power Guitar Effect Pedal DC Cable 2.1 mm

8 pcs power lead for guitar pedal Male to Male 5.5x2.1mm jack

  • Brand: Mr.Power
  • ASIN: B01BD8VZNI
  • UPC: 709818797781

Voodoo Lab 2.1mm Straight to Right Angle Barrel Cable - 18"

Voodoo Lab 2.1mm Straight to Right Angle Barrel

18" Cable for Voodoo Lab Pedal Power 2 Plus and ISO-5 Power Supplies, 2.1mm Angled and Straight Barrel Plugs, for Most Popular Effects Pedals

  • Brand: Voodoo Lab
  • ASIN: B00ADWTWYU
  • UPC: 813140010057

Silk Road 2.1mm Right Angle to same Barrel Cable DC Cable Assorted PACK (12inch x3, 20inch x2) for Power Supply

Silk Road 2.1mm Right Angle to same Barrel

Silk road DC cable pack includes 12 inch x 3 and 20 inch x2.From power supply to effect pedals. Cables: 5 (30cm x3, 50cm x 2)

  • Brand: Silk Road
  • ASIN: B00BEE9JSA

Donner Guitar Pedal Power Cord 60CM 10-Pack Effect Pedal Power Supply DC Cable

Donner Guitar Pedal Power Cord 60CM 10-Pack Effect

Product description Donner DC pedal power patch cables are replacement cables for your power supplies. The package has 10 x 24" (60CM) and all the cables are made with 21AWG high quality copper wire. They are one right angle (for your effect pedal DC in) and one straight (for your effect pedal power DC out) that is the way they all should be all the time. Other cables may look thicker, but only because of more layers of PVC or PE insulation. The thicker cable with more copper wire is especially important when you're using non-isolated power supplies that share the current across all the outputs. Analog circuit design pedals(overdrive,distortion,tremolos,compressors etc) typically only need 20-50ma to run, but digital reverb, delay, preamp pedals can need 100-200ma. If they don't get it they start to make weird ticking noises. You can always tell the thin cables because they "heat up" trying to pass high current. Specification: Length: 23.6 Inch (60CM) Plug Diameter: Male to Male 5.5 x 2.1 mm Jack Material Quality: Oxygen-Free Copper Wire Jacket Material: PVC Outer Diameter: OD2.0*2(mm) Package included: 10 x Pedal Power Cable

  • Brand: Donner
  • ASIN: B078XRM3W4

Voodoo Lab Pedal Power 18-volt Y Cable - 18" Str-Str Y 18v

Voodoo Lab Pedal Power 18-volt Y Cable -

18-volt Y Cable for Pedal Power Supplies

  • Color: Black
  • Brand: Voodoo Lab
  • ASIN: B001J6YNBG
  • UPC: 813140010040

Voodoo Lab Cable 2.1mm Output Splitter Adaptor Male-Female/Female

Voodoo Lab Cable 2.1mm Output Splitter Adaptor

Split one Pedal Power 2+ and ISO-5 power output jack to two separate jacks with this 4" output splitter adaptor. The two jacks will accept any 2.1mm barrel plug. This cable is designed to get more out of your Pedal Power than it appears, but please be sure the total current draw you require is less than the output provides. If you are unsure whether this cable powers your pedal properly, do not use until you know. Please reference the chart at the Voodoo Lab website.

  • Brand: Voodoo Lab
  • ASIN: B008NCVT66

Voodoo Lab Cable 3.5mm Mini Plug Positive Tip Right-Right 18"

Voodoo Lab Cable 3.5mm Mini Plug Positive Tip

3.5mm tip postive mini plug 18" cable for Voodoo Lab Pedal Power 2+ and ISO-5, both ends right angle. Used specifically for pedals utilizing vintage-style 3.5mm mini plug, such as vintage MXR, DOD, Electro-Harmonix, Pro-Co Rat, and non-LED Voodoo Lab pedals. If you are unsure whether this cable powers your pedal properly, do not use until you know. Please reference the chart at the Voodoo Lab website

  • Brand: Voodoo Lab
  • ASIN: B008NCVSFI

Voodoo Lab Cable 2.1mm Standard Polarity Center Negative Right-Right 18 inch

Voodoo Lab Cable 2.1mm Standard Polarity Center Negative

The most widely used cable with 2.1mm straight barrel connector on each end and standard (center negative) polarity. Used with a majority of popular pedal brands including Boss, MXR/Dunlop, TC Electronic Nova, Line 6 ToneCore, Ibanez and more.

  • Brand: Voodoo Lab
  • ASIN: B01MSN09Y3
Similar Voodoo Labs Cables Results
Voodoo Labs Cables Video Results
           

Voodoo Tech Episode 2 - Current Doubling Cables

Voodoo Labs Cables

Voodoo Lab's Ben Resnick goes over current doubling via cable and more! NOTE: If you have technical questions, please visit our forum at Voodoolab.com.

Tags: Line 6,M5,Pedal Power,Strymon

NAMM '10 - Voodoo Lab Pedal Power Iso 5, Pedal Power Cables & Ground Control Pro Updates

Voodoo Labs Cables

http://www.premierguitar.com PG's Rebecca Dirks is On Location in Anaheim, CA, for the 2010 NAMM show where she visits the Voodoo Lab booth. In this segment, we get to see what's new at Voodoo Lab, including the Pedal Power Iso 5, Pedal Power Cables and Ground Control Pro Updates. The Pedal Po...

Tags: premier guitar,namm 2010,voodoo lab,pedals,effe...

How To Get Rid of Noisy Pedals

Voodoo Labs Cables

How To Get Rid of Noisy Pedals **Correction** The RED power cable is for reverse polarity and NOT higher voltages. My bad! Check Voodoo Labs out here: http://bit.ly/2o1LfwV I use Voodoo Labs Pedal Power Mondo for my pedalboard, take a look at the other featured in this video! Mondo - http://b...

Tags: rabea,afro,massaad,toska,dorje,music,guitar,vic...