Zacuto Z-MFS32 Z-Finder 3.2" Mounting Frame for Small Body DSLRs

Zacuto Z-MFS32 Z-Finder 3.2" Mounting Frame for Small

The Zacuto Z-MFS32 Z-Finder Mounting frame is to use small body DSLRs with 3.2" screens such as the Canon 5D MIII and Nikon D800. This Frame will not work if you are using a battery grip with your camera. For that you will need a battery grip frame for 3.2" screens, which Zacuto is still working on. It also working on the 3.2" frame for Tall Bodied Cameras and a 3.2" Adhesive Frame.The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off.

  • Brand: Zacuto
  • ASIN: B0085X0KQS
  • UPC: 741459185848

Zacuto Z-Finder 3" Mounting Frame for Small DSLR Bodies

Zacuto Z-Finder 3" Mounting Frame for Small DSLR

The Z-Finder Mounting Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the small body cameras with no battery grips such as the Canon 5D Mark II, Canon 7D, Canon 550D, & Nikon D90.

  • Brand: Zacuto
  • ASIN: B003QN47TS
  • UPC: 654367385234

Zacuto Z-MFT32 Z-Finder 3.2" Mounting Frame for Tall DSLR Bodies

Zacuto Z-MFT32 Z-Finder 3.2" Mounting Frame for Tall

The Zacuto Z-MFT32 Z-Finder 3.2" Aircraft Aluminum Frame (for Tall DSLR Bodies) must be used in conjunction with the DSLR Gorilla Plate. The Z-Finder 3.2" frame attaches to the Gorilla Plate with two thumb screws (included); the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the back which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you can un-do the thumb screws and slide the frame off. This frame can also attach to Zacuto's DSLR Baseplate.

  • Brand: Zacuto
  • ASIN: B00AJD0WKQ
  • UPC: 741459185909

Zacuto Z-Finder Mounting Frame Slide Kit

Zacuto Z-Finder Mounting Frame Slide

The Zacuto Z-Finder Mounting Frame Slide Kit will attach any Zacuto Z-finder Mounting frame to a DSLR Gorilla Plate or DSLR Baseplate.

  • Brand: Zacuto
  • ASIN: B00BLWBHCG

Zacuto Z-Finder Mounting Frame for Small DSLR bodies with Battery Grips

Zacuto Z-Finder Mounting Frame for Small DSLR bodies

The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure.. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the small body cameras with battery grips such as the Canon 5D Mark II, Canon 7D & Nikon D90.

  • Brand: Zacuto
  • ASIN: B003KXXMHC
  • UPC: 654367385241

Zacuto Z-Finder 3" Mounting Frame for Tall DSLR bodies

Zacuto Z-Finder 3" Mounting Frame for Tall DSLR

The Z-Finder Mounting Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure.. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the taller body cameras such as the Canon 1D Mark IV & Nikon D3s.

  • Brand: Zacuto
  • ASIN: B003KXZNP6
  • UPC: 654367385258

Zacuto Z-Finder Pro 3.0x for 3.2 in. Screens

Zacuto Z-Finder Pro 3.0x for 3.2 in.

Z-Finder Extender FramesGorilla BaseplateDSLR Baseplate 

  • Brand: Zacuto
  • ASIN: B0085X0HM0
  • UPC: 741459185855

Zacuto Z-FRM Z-Finder Mounting Frame

Zacuto Z-FRM Z-Finder Mounting

Want to put your Z-Finder on multiple cameras? This is the answer. Additional Z-Finder Mounting Frames.

  • Brand: Zacuto
  • ASIN: B0037XJLNO
  • UPC: 753182724508

Zacuto Z-Finder Pro 2.5x for 3.2 in. Screens

Zacuto Z-Finder Pro 2.5x for 3.2 in.

The Zacuto Z-Finder Pro 2.5x for 3.2" Screens is another one of Zacuto’s Optical Viewfinders that allows small bodied DSLR cameras with 3.2" screens to have the correct form factor for video. It offers 2.5x focusable magnification (3x is available),a 40mm diameter Zacuto optical designed lens, an anti-fog coating protective cover, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3” LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal point you can use the Z-Finder Extender Frames. The 2.5x is recommend for customers who are near sighted or for prefer a smaller magnification. The Z-Finder Pro 2.5x has a diopter range of -4.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extend the Z-Finder glass further way from the LCD screen for people who are farsighted. The Z-Finder Pro uses our Gorilla Baseplate and Z-Finder mounting frame to mount to the camera. (The Z-finder Mounting Frame can also be attached to our DSLR Baseplate ) The Gorilla Baseplate attaches to the bottom of your camera using a ¼ 20” screw and the Z-Finder mounting frame attaches to the Gorilla Baseplate using thumb screws...

  • Brand: Zacuto
  • ASIN: B0085X0LTE
  • UPC: 741459185862

Zacuto FS5 Z-Finder for Sony FS5 Camera

Zacuto FS5 Z-Finder for Sony FS5

The Zacuto FS5 Z-Finder for Sony FS5 Camera is specifically designed to suit the shape and size of the monitor included with the Sony FS5. The FS5 Z-Finder comes with a flip up frame designed to slide onto the FS5 LCD and lock securely in place. The Zacuto Z-Finder will pop on and off the frame for quick shooting. The red lever at the bottom of the frame allows you to quickly flip the Z-Finder up without removing it from the frame. If a producer/client/director etc. wants to see into the viewfinder, you can flip it open instead of having to adjust so they can get their eye to the loupe. You can also pop off the Z-Finder and use the FS5 LCD as a monitor. This Z-finder will magnify the LCD screen by 2x and has a diopter for specific focus tuning. It cuts out any extraneous light and offers an initial point of stability by pressing your eye against our comfy, large eyecup. The FS5 Z-finder comes with a 40mm diameter Zacuto optical designed lens, anti-fog coated protective covers, and the mounting system designed specifically for the FS5 LCD. The diopter allows you to dial in the focus to match your eye. If you need extra focal points you can use the included Z-Finder Extender Frames. These are semi-permanent stackable frames that attach to the body of the Z-Finder and extend the Z-F...

  • Brand: Zacuto
  • ASIN: B01CO1RR9O
  • UPC: 741459186241

Zacuto C200 Z-Finder Optical Viewfinder for Canon LM-V1 4" LCD Monitor

Zacuto C200 Z-Finder Optical Viewfinder for Canon LM-V1

The Canon C200 Z-Finder is an optical viewfinder, specifically designed to attach to the Canon LM-V1 4" LCD Monitor compatible with the Canon C200 camera. This Z-Finder will magnify the LCD screen by 1.8x and has a diopter wheel for specific focus tuning. If you need extra focal points you can use the included Z-Finder Extender Frames. These are semi-permanent stackable frames that attach to the body of the Z-Finder and extend the Z-Finder glass further away from the LCD screen for people who are farsighted. The diopter range with the included lens and extender frames is -2.5 to 0. If you need more adjustment than the Extender Frames provide, you can purchase drop in diopters for further diopter adjustment. The interchangeable anti-fog diopters, -1, +1, +2, +3 and +4, correct the focus to your vision for perfect clarity. The Z-Finder cuts out any extraneous light and offers an initial point of stability by pressing your eye against the large eyecup. An aluminum sun mask is built in to the Z-Finder to protect your LCD screen from sunlight. The Z-Finder is mounted on a hinge so it can quickly flip up or down. The C200 Z-Finder is attaches by using a foam padded sleeve mounting frame that slides over the LCD screen of the LCD monitor. The C200 Z-Finder uses the Canon LA-V1 LCD Attac...

  • Brand: Zacuto
  • ASIN: B07KQNMHY1
  • UPC: 192223070219

Zacuto Adhesive Frame for Blackmagic Z-Finder

Zacuto Adhesive Frame for Blackmagic

The Zacuto Adhesive Frame for Blackmagic Pocket Cinema Camera 3.5" LCD screen. The Zacuto Z-Finder will pop on and off the frame for quick shooting. This adhesive Z-Finder mounting frame is compatible with the Black Magic Pocket Camera Z-Finder.

  • Brand: Zacuto
  • ASIN: B00KHQTGE8

Zacuto Z-Finder Jr

Zacuto Z-Finder

The Z-Finder Jr. is one of Zacuto's Optical Viewfinders that allows DSLR cameras to have the correct form factor for video. It offers 2.5x focusable magnification, a 40mm diameter Zacuto optical designed lens, an eyecup preventing extraneous light leakage, and a field of view perfectly matched to 3" LCD screens. The Z-Finder Jr. does not have a diopter instead it uses Z-Finder Extender Frames to adjust the focal point. The Z-Finder Jr's focal point is -2.75 and up (unlimited with extender frames). The Z-Finder Extender Frames attach to the skirt of the Z-Finder Jr. and allow you to semi-permanently stack the frames until the LCD screen is in focus for you. The Z-Finder Jr. uses a mounting bracket that must be sandwiched in between a tripod plate and the camera. The bracket mounts to the _ 20" screw on your tripod plate and the actual Jr. is held in place with pressure from the fork of the bracket it sits in. You also have the option to mount the Z-Finder Jr. using the Z-Finder Mounting Frame (snap fit adhesive mounting frame) which is also included. Note: The Z-Finder JR (with included mounting bracket) will only work on small body DSLRs such as the Canon 5D/7D. If you would like to use a Z-Finder JR on a small body DSLR with a battery grip, or a taller body camera like the Can...

  • Brand: Zacuto
  • ASIN: B003KRSYIK
  • UPC: 654367035900

TARION TR-V1 Universal LCD Display View Finder Viewfinder for 3.0" 3.2" Screen DSLR Canon 500D 550D 600D 650D 700D 60D 70D 5D MarkII 5D MarkIII 6D 7D 7D2 Nikon D90 D7000 D7 100D 5000D 5100D 5200D 530

TARION TR-V1 Universal LCD Display View Finder Viewfinder

TARION TR-V1 Universal LCD View Finder Viewfinder for 3.0" 3.2" Screen Pentax Canon Nikon DSLR Our newly upgraded TARION TR-V1 LCD viewfinder is super handy for photo and video capture with DSLR video cameras. The TR-V1 LCD viewfinder will magnify your LCD screen image by 2.5x so that you can easily focus on your subject, and will also offer a true view of your image when working outdoors in bright daylight. It is designed for a faster and more functional usage. Features: Use rotary knob on both sides to adjust up and down, more convenient and beautiful than original bottom hex adjustment. Thickened and extended quick release base plate, better fit the camera bottom. Adjustive metal parts on both sides can provide an extra protection for the frame of viewfinder. Rotatable and removable comfortable eye-cup. Less distortion/Anti-fogging coating. Front surface mirror minimizes ghosting. Serves as a sun shade. Magnet slot removes quickly. Baseplate fits MANFROTTO ballhead 501/701. Specifications: Rubber eye-cup. Quick release plate thread: 1/4, 3/8. Fine workmanship and beautiful outlook. Color: Black with Orange. 250% (2.5x) Magnification. Weight: approx. 480g. 100% Brand new. Suitable for: Canon, Nikon, DSLR with screen size up to 3.0" and 3.2". Package Includes: 1 x TARION TR...

  • Brand: TARION
  • ASIN: B00PGW727G
  • UPC: 701772011590

Zacuto Z-FIND-PRO2 Z-Finder Pro 2.5X Optical Viewfinder

Zacuto Z-FIND-PRO2 Z-Finder Pro 2.5X Optical

With the convergence of DSLR filmmaking, there are many essential tools that are needed to get the correct form factor for video. When shooting video on a DSLR camera, you must use the LCD screen and you must use manual focus. The combination of a very small screen, manual focus, and razor thin shallow depth-of-field makes it very challenging to focus. When shooting in both outdoor and indoor settings, the sunlight and glares make it nearly impossible to see the LCD screen. Lastly, holding the camera out in front of you so that you can focus on the screen makes the camera unstable and shaky. With any camera, you want to bring it close to the body for stability. The first essential item to help with these challenges is a DSLR Optical Viewfinder.The Zacuto Z-Finder Pro 2.5x comes with 2.5x magnification and either a 3″ or 3.2″ mounting frame. There is also a Panasonic GH3 specific version. 2.5x refers to the magnification built into the lens. If you wear particularly strong reading glasses we recommend a 3x model. Otherwise a 2.5x model is usually best. The 3″ or 3.2″ refers to the size of your camera LCD screen. The Z-Finder Pro models offer a 40mm diameter Zacuto optical design lens, two anti-fog coating protective lens cover, a large eyecup preventing extraneous light le...

  • Brand: Zacuto
  • ASIN: B003VZO5S4
  • UPC: 654367035931

Zacuto C300/500 Z-Finder Pro Optical Viewfinder for Canon C300 or C500

Zacuto C300/500 Z-Finder Pro Optical Viewfinder for Canon

The C300/500 Z-Finder is an optical viewfinder, specifically designed to attach to the Canon C300 and C500 cinema camera's LCD screen. This Z-Finder will magnify the LCD screen by 1.8x and has a diopter wheel for specific focus tuning. It cuts out any extraneous light and offers an initial point of stability by pressing your eye against the large eyecup. The Z-Finder includes 4 interchangeable anti-fog glass diopters, 0, +1, +2, and +3 so you can correct it to your vision right out of the box and then fine tune it with our red adjust wheel for perfect clarity. -1 and +4 diopters are available for purchase separately. An aluminum sun mask is built in to the Z-Finder to protect your LCD screen from sunlight. The C300/C500 Z-Finder is attaches by using a foam padded sleeve that slides over the LCD screen of either the C300 or C500. The sleeve is secured into place with a bar clamp. It also includes a unique monitor lock clip to keep the LCD screen from moving forward when the Z-Finder is pressed against your eye. If you'd like to move the detachable Canon LCD screen off to the side to better place it for your rig see our C300/C500 Z-Finder with Mounting Kit here. The C300/C500 Z-Finder is only compatible with the Canon C300 and the Canon C500. It is not compatible with any other cam...

  • Brand: Zacuto
  • ASIN: B00MIDZ3KY

Zacuto Camera Z-Finder for Blackmagic Pocket Cinema Camera 3.5" LCD Screen

Zacuto Camera Z-Finder for Blackmagic Pocket Cinema Camera

The Zacuto Blackmagic Pocket Camera Z-Finder 2x is an optical viewfinder designed specifically for use with the LCD screen on the Blackmagic Pocket Cinema Camera. The Z-Finder uses 2x magnification to turn the camera's 3.5" LCD screen into a clear, easy-to-focus viewfinder that lets you see your image in magnified detail. Thanks to the light-proof eyecup it also provides added stability to your handheld footage by adding a point-of-contact between the camera and your eye.

  • Brand: Zacuto
  • ASIN: B00J4ADFOK
  • UPC: 741459186111

Zacuto C100 Z-Finder Pro Optical Viewfinder for Canon C100 LCD, 40 mm Lens Diameter, 1.8x Magnification

Zacuto C100 Z-Finder Pro Optical Viewfinder for Canon

We loved the Z-Finder but recently bought a DJI Gimbal that came with a small HD monitor so we do not need the Z-Finder anymore.

  • Brand: Zacuto
  • ASIN: B00DHZRDLY

Hoodman Hoodeye for Sony A7 Models A7, A7R, A7S A711

Hoodman Hoodeye for Sony A7 Models A7, A7R,

Hoodman's Hoodeye Eyecup for Sony Alpha a7, a7R, a7S, and a7 II Models will help block out light when looking through your camera's viewfinder. From its over-sized design, which seals out ambient light, to its rotating nature that accommodates right or left eyed shooters, this eyecup ensures that the Sony Alpha a7, a7R, a7S, and a7 II shooter can get their shot with ease. The self locking mount slides over the eyepiece mounting rails, keeping the cup in place. Additionally, the hypoallergenic silicon keeps irritation at bay for hours of comfortable shooting.

  • Color: Black
  • Brand: Hoodman
  • ASIN: B014ALZ7UM
  • UPC: 017932334301

Elvid OptiView 50 3.2" LCD Viewfinder

Elvid OptiView 50 3.2" LCD

Ensure your focus is spot on with the 3x magnification of the Elvid OptiView 50 3.2" LCD Viewfinder. This viewfinder enlarges the LCD by 300% using multi-coated optical glass for sharp imagery from edge-to-edge and works with most 3.0" and 3.2" screens, in either 3:2 or 4:3 aspect ratios. The OptiView 50 also blocks light from hitting the screen, enabling clear, contrasty viewing even in bright sunlight and the rear half can be removed for shading without magnification. The OptiView 50 features a soft rubber eyecup that can be used with either your left or right eye and even eyeglasses. The viewfinder also offers the ability to mount directly to the camera by using the aluminum magnetic mounting frame with adhesive, or be carried around using the included lanyard.

  • Brand: ELVID
  • ASIN: B014EGTYMU
  • UPC: 847628588158
Similar Z-finder Mounting Frame Results
Z-finder Mounting Frame Video Results
           

Zacuto 3.2 inch Z-Finder Frame

Z-finder Mounting Frame

Zacuto introduces the 3.2" Adhesive frame and 3.2" metal frame for the Z-Finder Pro and Jr models. No need to buy a new Z-Finder for your Canon 5d Mark III or Nikon D800, now you can just buy one of these frames and retrofit your existing Z-Finder. Watch this video for more information. To see...

Tags: Zacuto,Canon 5d Mark III,Nikon D800,Z-Finder Pr...

Zacuto Z-Finder Pro 2.5 with a Battery Grip

Z-finder Mounting Frame

I have been playing around with some Rokinon Cinelenses lately and the problem it presents is because it is a manual lens, when shooting video outside the glare on the LCD screen makes it very difficult to see how focused the video is. I bought the Zacuto Viewfinder Pro 2.5 to solve that problem....

Tags: Zacuto,Rokinon,Cinelens,Viewfinder Pro,battery ...

Panasonic GH3/GH4 Z-Finder Frame

Z-finder Mounting Frame

To Buy The GH3/GH4 Z-Finder Pro: http://bit.ly/1yS2iQs To Buy The GH3/GH4 Frame: http://bit.ly/1o6CqKr Zacuto now offers a GH3/GH4 Z-Finder Frame that is compatible with our Z-Finder and the Panasonic GH3/GH4 camera. The GH3/GH4 frame only works with the new Gorilla Plate V2, which is now compa...

Tags: Panasonic Corporation (Award Winner)